audiooutput.cpp Example File

multimedia/audiooutput/audiooutput.cpp
/**************************************************************************** ** ** Copyright (C) 2017 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include "audiooutput.h" #include <QAudioDeviceInfo> #include <QAudioOutput> #include <QDebug> #include <QVBoxLayout> #include <qmath.h> #include <qendian.h> Generator::Generator(const QAudioFormat &format , qint64 durationUs , int sampleRate) { if (format.isValid()) generateData(format, durationUs, sampleRate); } void Generator::start() { open(QIODevice::ReadOnly); } void Generator::stop() { m_pos = 0; close(); } void Generator::generateData(const QAudioFormat &format, qint64 durationUs, int sampleRate) { const int channelBytes = format.sampleSize() / 8; const int sampleBytes = format.channelCount() * channelBytes; qint64 length = (format.sampleRate() * format.channelCount() * (format.sampleSize() / 8)) * durationUs / 1000000; Q_ASSERT(length % sampleBytes == 0); Q_UNUSED(sampleBytes) // suppress warning in release builds m_buffer.resize(length); unsigned char *ptr = reinterpret_cast<unsigned char *>(m_buffer.data()); int sampleIndex = 0; while (length) { // Produces value (-1..1) const qreal x = qSin(2 * M_PI * sampleRate * qreal(sampleIndex++ % format.sampleRate()) / format.sampleRate()); for (int i=0; i<format.channelCount(); ++i) { if (format.sampleSize() == 8) { if (format.sampleType() == QAudioFormat::UnSignedInt) { const quint8 value = static_cast<quint8>((1.0 + x) / 2 * 255); *reinterpret_cast<quint8 *>(ptr) = value; } else if (format.sampleType() == QAudioFormat::SignedInt) { const qint8 value = static_cast<qint8>(x * 127); *reinterpret_cast<qint8 *>(ptr) = value; } } else if (format.sampleSize() == 16) { if (format.sampleType() == QAudioFormat::UnSignedInt) { quint16 value = static_cast<quint16>((1.0 + x) / 2 * 65535); if (format.byteOrder() == QAudioFormat::LittleEndian) qToLittleEndian<quint16>(value, ptr); else qToBigEndian<quint16>(value, ptr); } else if (format.sampleType() == QAudioFormat::SignedInt) { qint16 value = static_cast<qint16>(x * 32767); if (format.byteOrder() == QAudioFormat::LittleEndian) qToLittleEndian<qint16>(value, ptr); else qToBigEndian<qint16>(value, ptr); } } ptr += channelBytes; length -= channelBytes; } } } qint64 Generator::readData(char *data, qint64 len) { qint64 total = 0; if (!m_buffer.isEmpty()) { while (len - total > 0) { const qint64 chunk = qMin((m_buffer.size() - m_pos), len - total); memcpy(data + total, m_buffer.constData() + m_pos, chunk); m_pos = (m_pos + chunk) % m_buffer.size(); total += chunk; } } return total; } qint64 Generator::writeData(const char *data, qint64 len) { Q_UNUSED(data); Q_UNUSED(len); return 0; } qint64 Generator::bytesAvailable() const { return m_buffer.size() + QIODevice::bytesAvailable(); } AudioTest::AudioTest() : m_pushTimer(new QTimer(this)) { initializeWindow(); initializeAudio(QAudioDeviceInfo::defaultOutputDevice()); } AudioTest::~AudioTest() { m_pushTimer->stop(); } void AudioTest::initializeWindow() { QWidget *window = new QWidget; QVBoxLayout *layout = new QVBoxLayout; m_deviceBox = new QComboBox(this); const QAudioDeviceInfo &defaultDeviceInfo = QAudioDeviceInfo::defaultOutputDevice(); m_deviceBox->addItem(defaultDeviceInfo.deviceName(), qVariantFromValue(defaultDeviceInfo)); for (auto &deviceInfo: QAudioDeviceInfo::availableDevices(QAudio::AudioOutput)) { if (deviceInfo != defaultDeviceInfo) m_deviceBox->addItem(deviceInfo.deviceName(), qVariantFromValue(deviceInfo)); } connect(m_deviceBox, QOverload<int>::of(&QComboBox::activated), this, &AudioTest::deviceChanged); layout->addWidget(m_deviceBox); m_modeButton = new QPushButton(this); connect(m_modeButton, &QPushButton::clicked, this, &AudioTest::toggleMode); layout->addWidget(m_modeButton); m_suspendResumeButton = new QPushButton(this); connect(m_suspendResumeButton, &QPushButton::clicked, this, &AudioTest::toggleSuspendResume); layout->addWidget(m_suspendResumeButton); QHBoxLayout *volumeBox = new QHBoxLayout; m_volumeLabel = new QLabel; m_volumeLabel->setText(tr("Volume:")); m_volumeSlider = new QSlider(Qt::Horizontal); m_volumeSlider->setMinimum(0); m_volumeSlider->setMaximum(100); m_volumeSlider->setSingleStep(10); connect(m_volumeSlider, &QSlider::valueChanged, this, &AudioTest::volumeChanged); volumeBox->addWidget(m_volumeLabel); volumeBox->addWidget(m_volumeSlider); layout->addLayout(volumeBox); window->setLayout(layout); setCentralWidget(window); window->show(); } void AudioTest::initializeAudio(const QAudioDeviceInfo &deviceInfo) { QAudioFormat format; format.setSampleRate(44100); format.setChannelCount(1); format.setSampleSize(16); format.setCodec("audio/pcm"); format.setByteOrder(QAudioFormat::LittleEndian); format.setSampleType(QAudioFormat::SignedInt); if (!deviceInfo.isFormatSupported(format)) { qWarning() << "Default format not supported - trying to use nearest"; format = deviceInfo.nearestFormat(format); } const int durationSeconds = 1; const int toneSampleRateHz = 600; m_generator.reset(new Generator(format, durationSeconds * 1000000, toneSampleRateHz)); m_audioOutput.reset(new QAudioOutput(deviceInfo, format)); m_generator->start(); qreal initialVolume = QAudio::convertVolume(m_audioOutput->volume(), QAudio::LinearVolumeScale, QAudio::LogarithmicVolumeScale); m_volumeSlider->setValue(qRound(initialVolume * 100)); toggleMode(); } void AudioTest::deviceChanged(int index) { m_generator->stop(); m_audioOutput->stop(); m_audioOutput->disconnect(this); initializeAudio(m_deviceBox->itemData(index).value<QAudioDeviceInfo>()); } void AudioTest::volumeChanged(int value) { qreal linearVolume = QAudio::convertVolume(value / qreal(100), QAudio::LogarithmicVolumeScale, QAudio::LinearVolumeScale); m_audioOutput->setVolume(linearVolume); } void AudioTest::toggleMode() { m_pushTimer->stop(); m_audioOutput->stop(); toggleSuspendResume(); if (m_pullMode) { //switch to pull mode (QAudioOutput pulls from Generator as needed) m_modeButton->setText(tr("Enable push mode")); m_audioOutput->start(m_generator.data()); } else { //switch to push mode (periodically push to QAudioOutput using a timer) m_modeButton->setText(tr("Enable pull mode")); auto io = m_audioOutput->start(); m_pushTimer->disconnect(); connect(m_pushTimer, &QTimer::timeout, [this, io]() { if (m_audioOutput->state() == QAudio::StoppedState) return; QByteArray buffer(32768, 0); int chunks = m_audioOutput->bytesFree() / m_audioOutput->periodSize(); while (chunks) { const qint64 len = m_generator->read(buffer.data(), m_audioOutput->periodSize()); if (len) io->write(buffer.data(), len); if (len != m_audioOutput->periodSize()) break; --chunks; } }); m_pushTimer->start(20); } m_pullMode = !m_pullMode; } void AudioTest::toggleSuspendResume() { if (m_audioOutput->state() == QAudio::SuspendedState || m_audioOutput->state() == QAudio::StoppedState) { m_audioOutput->resume(); m_suspendResumeButton->setText(tr("Suspend recording")); } else if (m_audioOutput->state() == QAudio::ActiveState) { m_audioOutput->suspend(); m_suspendResumeButton->setText(tr("Resume playback")); } else if (m_audioOutput->state() == QAudio::IdleState) { // no-op } }

© 2018 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.