C
STM32F769I Discovery Kit
This topic provides you the necessary information about STM's STM32F769I discovery kit.
Board features
- STM32F769NIH6 MCU (ARM® Cortex®-M7)
- 4” capacitive touch LCD display (800x480)
- 512+16+4 Kbytes of RAM
- 128-Mbit SDRAM
- 2 MB Flash memory
- 512-Mbit Quad-SPI NOR Flash memory
More information fromSTM32F769I Discovery Website
Prebuilt demos and examples
The package for STM32f769I-DISCOVERY
board comes with a prebuilt thermo demo binary. As Qt Quick Ultralite supports both bare metal and FreeRTOS on this board, there are different binaries for both under the demos_images
directory. Also Thermo
demo has two variants, one with metric units and another with imperial units.
See the flashing instructions for the ST boards section, for more information on flashing the device. For this board, select MX25L512G_STM32F769I-DISCO
as the external loader.
Reading debug messages
By default, the output of printf
calls are redirected to STLink virtual COM Port, which is exposed on the host machine via USB. The serial configuration is the following:
Baud rate: 115200 Data bits: 8 Stop bits: 1 Parity: None Flow control: None
Known limitations
Due to limited SDRAM bandwidth, accessing SDRAM with the CPU may cause visual artifacts while the framebuffer is being scanned by the display controller.
Available under certain Qt licenses.
Find out more.