C
Prerequisites
The following prerequisites must be installed to start developing for the different target platforms on the Linux and Windows host. You can download the Qt online installer from your Qt account.
The following table lists all the common and board-specific prerequisites:
Use the Qt online installer to install the following prerequisites:
- Qt for MCUs SDK
- Qt Creator v6.0.0 or newer
- CMake 3.15 or newer
- Ninja 1.10.0 or newer
- ARM Toolchain 9-2020-q2-update or IAR Build Tools for Arm V8.50, depending on which toolchain you are using
Use the Qt online installer to install the following prerequisites:
- MCUXpresso IDE
- MCUXpresso board SDK:
- MIMXRT1050-EVKB - MCUXpresso SDK 2.10.0
- MIMXRT1060-EVK - MCUXpresso SDK 2.10.1
- MIMXRT1064-EVK - MCUXpresso SDK 2.10.0
- MIMXRT1170-EVK - MCUXpresso SDK 2.10.1
Use the Qt online installer to install the following prerequisites:
- For EK-RA6M3G only:
- Flexible Software Package (FSP) source code v2.0.0
Install the following separately as the Qt online installer does not provide these:
- Renesas e2 studio 2020-10 (20.10.0) or newer.
- For RH850-D1M1A only:
- Green Hills Multi IDE v7.1.6 with Compiler 2018.1.5 and Probe 5.6.4 for V800.
- Renesas Graphics Library (v2.0.0a) for D1M1/2(H) for Green Hills Compiler.
- Renesas Flash Programmer.
- For EK-RA6M3G only:
- FSP Packs v2.0.0
- SEGGER J-Link Software and Documentation pack v6.96 or newer.
Use the Qt online installer to install the following prerequisites:
- STM Cube Programmer 2.4.0 or newer
- STM32Cube board SDK:
- STM32F769I-DISCOVERY - STM32CubeF7 SDK 1.16.0 or newer
- STM32H750B-DISCOVERY - STM32CubeH7 SDK 1.5.0
- STM32F469I-DISCOVERY - STM32CubeF4 SDK 1.24.0 or newer
Notes: In addition, flash with the bootloader image to the device if required. For more information, see Bootloader Flashing Instructions for ST boards.
- Green Hills MULTI Compiler for Embedded ARM. Qt for MCUs is tested against Compiler version 2019.5.
- Graphics Driver for Traveo II Cluster Series for the target device CYT4DN, including the SRC, LIB and SDK packages.
- Cypress AutoFlashUtil 1.0 in order to be able to flash the built executables to the device.
- A MiniProg4 debug probe if flashing directly from Qt Creator.
Available under certain Qt licenses.
Find out more.