The QKnxNetIpDeviceConfigurationRequestProxy class provides the means to read a device configuration request from the generic QKnxNetIpFrame class and to create a KNXnet/IP frame based on the information. More...
|qmake:||QT += knx|
|QKnxNetIpDeviceConfigurationRequestProxy(const QKnxNetIpFrame &frame)|
KNXnet/IP device configuration and management is based on interface object properties. Devices accept configuration through KNX network telegrams, whereas routers accept configuration through routing frames that carry common external message interface (cEMI) frames addressed to the individual address of the router.
Each subnetwork connected to a KNXnet/IP server is represented by a control endpoint. KNXnet/IP clients can discover the control endpoints by using the discovery procedure.
In addition, each subnetwork is represented by a configuration and management endpoint that enables access to device parameters, filter table, and so on, after a connection is established through the control endpoint. The host address protocol information (HPAI) of the configuration and management endpoint is used by KNXnet/IP devices to exchange configuration information with ETS.
A KNXnet/IP client connects to a configuration and management data endpoint of a KNXnet/IP server to send device configuration request frames and to receive device configuration acknowledgment frames. A device configuration request is used to read and write KNXnet/IP device configuration data. When a server receives a configuration request, it responds with a device configuration acknowledgment to confirm the reception of the request.
A device configuration request frame contains the ID of the communication channel between a KNXnet/IP client and server, the sequence number of the frame, and a cEMI frame with the configuration message.
The KNXnet/IP server discards frames with unexpected sequence numbers and does not send a device configuration acknowledgment upon receiving them.
Note: When using QKnxNetIpDeviceConfigurationRequestProxy, care must be taken to ensure that the referenced KNXnet/IP frame outlives the proxy on all code paths, lest the proxy ends up referencing deleted data.
The following code sample illustrates how to read the device configuration request information sent by a KNXnet/IP client:
Member Function Documentation
QKnxNetIpDeviceConfigurationRequestProxy::QKnxNetIpDeviceConfigurationRequestProxy(const QKnxNetIpFrame &frame)
Constructs a proxy object to read the device configuration request information carried by the specified KNXnet/IP frame frame.
[static] QKnxNetIpDeviceConfigurationRequestProxy::Builder QKnxNetIpDeviceConfigurationRequestProxy::builder()
Returns a builder object to create a KNXnet/IP device configuration request frame.
QKnxDeviceManagementFrame QKnxNetIpDeviceConfigurationRequestProxy::cemi() const
Returns a cEMI frame that contains the configuration message.
quint8 QKnxNetIpDeviceConfigurationRequestProxy::channelId() const
Returns the ID of the communication channel between a KNXnet/IP client and server.
true if the frame contains initialized values and is in itself valid, otherwise returns
false. A valid KNXnet/IP frame consists of at least a valid header and a size in bytes corresponding to the total size of the KNXnet/IP frame header.
See also QKnxNetIpFrameHeader::totalSize().
quint8 QKnxNetIpDeviceConfigurationRequestProxy::sequenceNumber() const
Returns the sequence number of a device configuration request frame.
© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.