C

STM32F7508-DK Discovery Kit Flashing Instructions

Before flashing the Thermostat Demo image into the STM32F7508-DK Discovery Kit board, you need to install STM32 ST-LINK Utility After the software is installed, flash the device as follows:

  1. Connect the device with the host PC by connecting the USB cable to the device port ST-LINK.
  2. Open STM32 ST-LINK Utility.
  3. Select External Loader > Add External Loader.

  4. Select proper device N25Q128A_STM32F7508-DISCO.
  5. Select Validate.

  6. Open bootloader_stm32f7508-discovery.hex file delivered with Qt Quick Ultralite 1.0 package and select Program verify.

    Note: Flashing the bootloader is a one time requirement. Unless internal flash memory is rewritten with different content, there is no need to repeat that when trying other demo hex files.

  7. In the dialog, select Start.

  8. Once the flashing process is completed open proper demo hex file (thermo_small_stm32f7508_16bpp_1.0.hex or thermo_small_stm32f7508_32bpp_1.0.hex)
  9. Select Program verify
  10. In the dialog, select Start.
  11. Once the process is finished one shall be able to see running application on the device.

Available under certain Qt licenses.
Find out more.