audiorecorder.cpp Example File

/**************************************************************************** ** ** Copyright (C) 2017 The Qt Company Ltd. ** Contact: ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see For further ** information use the contact form at ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include "audiorecorder.h" #include "audiolevel.h" #include "ui_audiorecorder.h" #include <QAudioProbe> #include <QAudioRecorder> #include <QDir> #include <QFileDialog> #include <QMediaRecorder> #include <QStandardPaths> static qreal getPeakValue(const QAudioFormat &format); static QVector<qreal> getBufferLevels(const QAudioBuffer &buffer); template <class T> static QVector<qreal> getBufferLevels(const T *buffer, int frames, int channels); AudioRecorder::AudioRecorder() : ui(new Ui::AudioRecorder) { ui->setupUi(this); m_audioRecorder = new QAudioRecorder(this); m_probe = new QAudioProbe(this); connect(m_probe, &QAudioProbe::audioBufferProbed, this, &AudioRecorder::processBuffer); m_probe->setSource(m_audioRecorder); //audio devices ui->audioDeviceBox->addItem(tr("Default"), QVariant(QString())); for (auto &device: m_audioRecorder->audioInputs()) { ui->audioDeviceBox->addItem(device, QVariant(device)); } //audio codecs ui->audioCodecBox->addItem(tr("Default"), QVariant(QString())); for (auto &codecName: m_audioRecorder->supportedAudioCodecs()) { ui->audioCodecBox->addItem(codecName, QVariant(codecName)); } //containers ui->containerBox->addItem(tr("Default"), QVariant(QString())); for (auto &containerName: m_audioRecorder->supportedContainers()) { ui->containerBox->addItem(containerName, QVariant(containerName)); } //sample rate ui->sampleRateBox->addItem(tr("Default"), QVariant(0)); for (int sampleRate: m_audioRecorder->supportedAudioSampleRates()) { ui->sampleRateBox->addItem(QString::number(sampleRate), QVariant( sampleRate)); } //channels ui->channelsBox->addItem(tr("Default"), QVariant(-1)); ui->channelsBox->addItem(QStringLiteral("1"), QVariant(1)); ui->channelsBox->addItem(QStringLiteral("2"), QVariant(2)); ui->channelsBox->addItem(QStringLiteral("4"), QVariant(4)); //quality ui->qualitySlider->setRange(0, int(QMultimedia::VeryHighQuality)); ui->qualitySlider->setValue(int(QMultimedia::NormalQuality)); //bitrates: ui->bitrateBox->addItem(tr("Default"), QVariant(0)); ui->bitrateBox->addItem(QStringLiteral("32000"), QVariant(32000)); ui->bitrateBox->addItem(QStringLiteral("64000"), QVariant(64000)); ui->bitrateBox->addItem(QStringLiteral("96000"), QVariant(96000)); ui->bitrateBox->addItem(QStringLiteral("128000"), QVariant(128000)); connect(m_audioRecorder, &QAudioRecorder::durationChanged, this, &AudioRecorder::updateProgress); connect(m_audioRecorder, &QAudioRecorder::statusChanged, this, &AudioRecorder::updateStatus); connect(m_audioRecorder, &QAudioRecorder::stateChanged, this, &AudioRecorder::onStateChanged); connect(m_audioRecorder, QOverload<QMediaRecorder::Error>::of(&QAudioRecorder::error), this, &AudioRecorder::displayErrorMessage); } void AudioRecorder::updateProgress(qint64 duration) { if (m_audioRecorder->error() != QMediaRecorder::NoError || duration < 2000) return; ui->statusbar->showMessage(tr("Recorded %1 sec").arg(duration / 1000)); } void AudioRecorder::updateStatus(QMediaRecorder::Status status) { QString statusMessage; switch (status) { case QMediaRecorder::RecordingStatus: statusMessage = tr("Recording to %1").arg(m_audioRecorder->actualLocation().toString()); break; case QMediaRecorder::PausedStatus: clearAudioLevels(); statusMessage = tr("Paused"); break; case QMediaRecorder::UnloadedStatus: case QMediaRecorder::LoadedStatus: clearAudioLevels(); statusMessage = tr("Stopped"); default: break; } if (m_audioRecorder->error() == QMediaRecorder::NoError) ui->statusbar->showMessage(statusMessage); } void AudioRecorder::onStateChanged(QMediaRecorder::State state) { switch (state) { case QMediaRecorder::RecordingState: ui->recordButton->setText(tr("Stop")); ui->pauseButton->setText(tr("Pause")); break; case QMediaRecorder::PausedState: ui->recordButton->setText(tr("Stop")); ui->pauseButton->setText(tr("Resume")); break; case QMediaRecorder::StoppedState: ui->recordButton->setText(tr("Record")); ui->pauseButton->setText(tr("Pause")); break; } ui->pauseButton->setEnabled(m_audioRecorder->state() != QMediaRecorder::StoppedState); } static QVariant boxValue(const QComboBox *box) { int idx = box->currentIndex(); if (idx == -1) return QVariant(); return box->itemData(idx); } void AudioRecorder::toggleRecord() { if (m_audioRecorder->state() == QMediaRecorder::StoppedState) { m_audioRecorder->setAudioInput(boxValue(ui->audioDeviceBox).toString()); QAudioEncoderSettings settings; settings.setCodec(boxValue(ui->audioCodecBox).toString()); settings.setSampleRate(boxValue(ui->sampleRateBox).toInt()); settings.setBitRate(boxValue(ui->bitrateBox).toInt()); settings.setChannelCount(boxValue(ui->channelsBox).toInt()); settings.setQuality(QMultimedia::EncodingQuality(ui->qualitySlider->value())); settings.setEncodingMode(ui->constantQualityRadioButton->isChecked() ? QMultimedia::ConstantQualityEncoding : QMultimedia::ConstantBitRateEncoding); QString container = boxValue(ui->containerBox).toString(); m_audioRecorder->setEncodingSettings(settings, QVideoEncoderSettings(), container); m_audioRecorder->record(); } else { m_audioRecorder->stop(); } } void AudioRecorder::togglePause() { if (m_audioRecorder->state() != QMediaRecorder::PausedState) m_audioRecorder->pause(); else m_audioRecorder->record(); } void AudioRecorder::setOutputLocation() { #ifdef Q_OS_WINRT // UWP does not allow to store outside the sandbox const QString cacheDir = QStandardPaths::writableLocation(QStandardPaths::CacheLocation); if (!QDir().mkpath(cacheDir)) { qWarning() << "Failed to create cache directory"; return; } QString fileName = cacheDir + QLatin1String("/output.wav"); #else QString fileName = QFileDialog::getSaveFileName(); #endif m_audioRecorder->setOutputLocation(QUrl::fromLocalFile(fileName)); m_outputLocationSet = true; } void AudioRecorder::displayErrorMessage() { ui->statusbar->showMessage(m_audioRecorder->errorString()); } void AudioRecorder::clearAudioLevels() { for (int i = 0; i < m_audioLevels.size(); ++i)>setLevel(0); } // This function returns the maximum possible sample value for a given audio format qreal getPeakValue(const QAudioFormat& format) { // Note: Only the most common sample formats are supported if (!format.isValid()) return qreal(0); if (format.codec() != "audio/pcm") return qreal(0); switch (format.sampleType()) { case QAudioFormat::Unknown: break; case QAudioFormat::Float: if (format.sampleSize() != 32) // other sample formats are not supported return qreal(0); return qreal(1.00003); case QAudioFormat::SignedInt: if (format.sampleSize() == 32) return qreal(INT_MAX); if (format.sampleSize() == 16) return qreal(SHRT_MAX); if (format.sampleSize() == 8) return qreal(CHAR_MAX); break; case QAudioFormat::UnSignedInt: if (format.sampleSize() == 32) return qreal(UINT_MAX); if (format.sampleSize() == 16) return qreal(USHRT_MAX); if (format.sampleSize() == 8) return qreal(UCHAR_MAX); break; } return qreal(0); } // returns the audio level for each channel QVector<qreal> getBufferLevels(const QAudioBuffer& buffer) { QVector<qreal> values; if (!buffer.format().isValid() || buffer.format().byteOrder() != QAudioFormat::LittleEndian) return values; if (buffer.format().codec() != "audio/pcm") return values; int channelCount = buffer.format().channelCount(); values.fill(0, channelCount); qreal peak_value = getPeakValue(buffer.format()); if (qFuzzyCompare(peak_value, qreal(0))) return values; switch (buffer.format().sampleType()) { case QAudioFormat::Unknown: case QAudioFormat::UnSignedInt: if (buffer.format().sampleSize() == 32) values = getBufferLevels(buffer.constData<quint32>(), buffer.frameCount(), channelCount); if (buffer.format().sampleSize() == 16) values = getBufferLevels(buffer.constData<quint16>(), buffer.frameCount(), channelCount); if (buffer.format().sampleSize() == 8) values = getBufferLevels(buffer.constData<quint8>(), buffer.frameCount(), channelCount); for (int i = 0; i < values.size(); ++i) values[i] = qAbs( - peak_value / 2) / (peak_value / 2); break; case QAudioFormat::Float: if (buffer.format().sampleSize() == 32) { values = getBufferLevels(buffer.constData<float>(), buffer.frameCount(), channelCount); for (int i = 0; i < values.size(); ++i) values[i] /= peak_value; } break; case QAudioFormat::SignedInt: if (buffer.format().sampleSize() == 32) values = getBufferLevels(buffer.constData<qint32>(), buffer.frameCount(), channelCount); if (buffer.format().sampleSize() == 16) values = getBufferLevels(buffer.constData<qint16>(), buffer.frameCount(), channelCount); if (buffer.format().sampleSize() == 8) values = getBufferLevels(buffer.constData<qint8>(), buffer.frameCount(), channelCount); for (int i = 0; i < values.size(); ++i) values[i] /= peak_value; break; } return values; } template <class T> QVector<qreal> getBufferLevels(const T *buffer, int frames, int channels) { QVector<qreal> max_values; max_values.fill(0, channels); for (int i = 0; i < frames; ++i) { for (int j = 0; j < channels; ++j) { qreal value = qAbs(qreal(buffer[i * channels + j])); if (value > max_values.replace(j, value); } } return max_values; } void AudioRecorder::processBuffer(const QAudioBuffer& buffer) { if (m_audioLevels.count() != buffer.format().channelCount()) { qDeleteAll(m_audioLevels); m_audioLevels.clear(); for (int i = 0; i < buffer.format().channelCount(); ++i) { AudioLevel *level = new AudioLevel(ui->centralwidget); m_audioLevels.append(level); ui->levelsLayout->addWidget(level); } } QVector<qreal> levels = getBufferLevels(buffer); for (int i = 0; i < levels.count(); ++i)>setLevel(; }

© 2018 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.