threadrenderer.cpp Example File

/**************************************************************************** ** ** Copyright (C) 2017 The Qt Company Ltd. ** Contact: ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see For further ** information use the contact form at ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include "threadrenderer.h" #include "logorenderer.h" #include <QtCore/QMutex> #include <QtCore/QThread> #include <QtGui/QOpenGLContext> #include <QtGui/QOpenGLFramebufferObject> #include <QtGui/QGuiApplication> #include <QtGui/QOffscreenSurface> #include <QtQuick/QQuickWindow> #include <qsgsimpletexturenode.h> QList<QThread *> ThreadRenderer::threads; /* * The render thread shares a context with the scene graph and will * render into two separate FBOs, one to use for display and one * to use for rendering */ class RenderThread : public QThread { Q_OBJECT public: RenderThread(const QSize &size) : surface(0) , context(0) , m_renderFbo(0) , m_displayFbo(0) , m_logoRenderer(0) , m_size(size) { ThreadRenderer::threads << this; } QOffscreenSurface *surface; QOpenGLContext *context; public slots: void renderNext() { context->makeCurrent(surface); if (!m_renderFbo) { // Initialize the buffers and renderer QOpenGLFramebufferObjectFormat format; format.setAttachment(QOpenGLFramebufferObject::CombinedDepthStencil); m_renderFbo = new QOpenGLFramebufferObject(m_size, format); m_displayFbo = new QOpenGLFramebufferObject(m_size, format); m_logoRenderer = new LogoRenderer(); m_logoRenderer->initialize(); } m_renderFbo->bind(); context->functions()->glViewport(0, 0, m_size.width(), m_size.height()); m_logoRenderer->render(); // We need to flush the contents to the FBO before posting // the texture to the other thread, otherwise, we might // get unexpected results. context->functions()->glFlush(); m_renderFbo->bindDefault(); qSwap(m_renderFbo, m_displayFbo); emit textureReady(m_displayFbo->texture(), m_size); } void shutDown() { context->makeCurrent(surface); delete m_renderFbo; delete m_displayFbo; delete m_logoRenderer; context->doneCurrent(); delete context; // schedule this to be deleted only after we're done cleaning up surface->deleteLater(); // Stop event processing, move the thread to GUI and make sure it is deleted. exit(); moveToThread(QGuiApplication::instance()->thread()); } signals: void textureReady(int id, const QSize &size); private: QOpenGLFramebufferObject *m_renderFbo; QOpenGLFramebufferObject *m_displayFbo; LogoRenderer *m_logoRenderer; QSize m_size; }; class TextureNode : public QObject, public QSGSimpleTextureNode { Q_OBJECT public: TextureNode(QQuickWindow *window) : m_id(0) , m_size(0, 0) , m_texture(0) , m_window(window) { // Our texture node must have a texture, so use the default 0 texture. m_texture = m_window->createTextureFromId(0, QSize(1, 1)); setTexture(m_texture); setFiltering(QSGTexture::Linear); } ~TextureNode() { delete m_texture; } signals: void textureInUse(); void pendingNewTexture(); public slots: // This function gets called on the FBO rendering thread and will store the // texture id and size and schedule an update on the window. void newTexture(int id, const QSize &size) { m_mutex.lock(); m_id = id; m_size = size; m_mutex.unlock(); // We cannot call QQuickWindow::update directly here, as this is only allowed // from the rendering thread or GUI thread. emit pendingNewTexture(); } // Before the scene graph starts to render, we update to the pending texture void prepareNode() { m_mutex.lock(); int newId = m_id; QSize size = m_size; m_id = 0; m_mutex.unlock(); if (newId) { delete m_texture; // note: include QQuickWindow::TextureHasAlphaChannel if the rendered content // has alpha. m_texture = m_window->createTextureFromId(newId, size); setTexture(m_texture); markDirty(DirtyMaterial); // This will notify the rendering thread that the texture is now being rendered // and it can start rendering to the other one. emit textureInUse(); } } private: int m_id; QSize m_size; QMutex m_mutex; QSGTexture *m_texture; QQuickWindow *m_window; }; ThreadRenderer::ThreadRenderer() : m_renderThread(0) { setFlag(ItemHasContents, true); m_renderThread = new RenderThread(QSize(512, 512)); } void ThreadRenderer::ready() { m_renderThread->surface = new QOffscreenSurface(); m_renderThread->surface->setFormat(m_renderThread->context->format()); m_renderThread->surface->create(); m_renderThread->moveToThread(m_renderThread); connect(window(), &QQuickWindow::sceneGraphInvalidated, m_renderThread, &RenderThread::shutDown, Qt::QueuedConnection); m_renderThread->start(); update(); } QSGNode *ThreadRenderer::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *) { TextureNode *node = static_cast<TextureNode *>(oldNode); if (!m_renderThread->context) { QOpenGLContext *current = window()->openglContext(); // Some GL implementations requres that the currently bound context is // made non-current before we set up sharing, so we doneCurrent here // and makeCurrent down below while setting up our own context. current->doneCurrent(); m_renderThread->context = new QOpenGLContext(); m_renderThread->context->setFormat(current->format()); m_renderThread->context->setShareContext(current); m_renderThread->context->create(); m_renderThread->context->moveToThread(m_renderThread); current->makeCurrent(window()); QMetaObject::invokeMethod(this, "ready"); return 0; } if (!node) { node = new TextureNode(window()); /* Set up connections to get the production of FBO textures in sync with vsync on the * rendering thread. * * When a new texture is ready on the rendering thread, we use a direct connection to * the texture node to let it know a new texture can be used. The node will then * emit pendingNewTexture which we bind to QQuickWindow::update to schedule a redraw. * * When the scene graph starts rendering the next frame, the prepareNode() function * is used to update the node with the new texture. Once it completes, it emits * textureInUse() which we connect to the FBO rendering thread's renderNext() to have * it start producing content into its current "back buffer". * * This FBO rendering pipeline is throttled by vsync on the scene graph rendering thread. */ connect(m_renderThread, &RenderThread::textureReady, node, &TextureNode::newTexture, Qt::DirectConnection); connect(node, &TextureNode::pendingNewTexture, window(), &QQuickWindow::update, Qt::QueuedConnection); connect(window(), &QQuickWindow::beforeRendering, node, &TextureNode::prepareNode, Qt::DirectConnection); connect(node, &TextureNode::textureInUse, m_renderThread, &RenderThread::renderNext, Qt::QueuedConnection); // Get the production of FBO textures started.. QMetaObject::invokeMethod(m_renderThread, "renderNext", Qt::QueuedConnection); } node->setRect(boundingRect()); return node; } #include "threadrenderer.moc"

© 2018 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.