xorblender.cpp Example File

/**************************************************************************** ** ** Copyright (C) 2014 Gunnar Sletta <gunnar@sletta.org> ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include "xorblender.h" #include <QtCore/QPointer> #include <QtGui/QOpenGLContext> #include <QtGui/QOpenGLFunctions> #include <QtQuick/QSGSimpleMaterial> #include <QtQuick/QSGTexture> #include <QtQuick/QSGGeometryNode> #include <QtQuick/QSGTextureProvider> /* This example could just as well have been implemented all in QML using * a ShaderEffect, and for 90% of all usecases, using a ShaderEffect will * be sufficient. This example exists to illustrate how to consume * texture providers from C++ and how to use multiple texture sources in * a custom material. */ struct XorBlendState { QSGTexture *texture1; QSGTexture *texture2; }; class XorBlendShader : public QSGSimpleMaterialShader<XorBlendState> { QSG_DECLARE_SIMPLE_SHADER(XorBlendShader, XorBlendState) public: const char *vertexShader() const override { return "attribute highp vec4 aVertex; \n" "attribute highp vec2 aTexCoord; \n" "uniform highp mat4 qt_Matrix; \n" "varying highp vec2 vTexCoord; \n" "void main() { \n" " gl_Position = qt_Matrix * aVertex; \n" " vTexCoord = aTexCoord; \n" "}"; } const char *fragmentShader() const override { return "uniform lowp float qt_Opacity; \n" "uniform lowp sampler2D uSource1; \n" "uniform lowp sampler2D uSource2; \n" "varying highp vec2 vTexCoord; \n" "void main() { \n" " lowp vec4 p1 = texture2D(uSource1, vTexCoord); \n" " lowp vec4 p2 = texture2D(uSource2, vTexCoord); \n" " gl_FragColor = (p1 * (1.0 - p2.a) + p2 * (1.0 - p1.a)) * qt_Opacity; \n" "}"; } QList<QByteArray> attributes() const override { return QList<QByteArray>() << "aVertex" << "aTexCoord"; } void updateState(const XorBlendState *state, const XorBlendState *) override { QOpenGLFunctions *f = QOpenGLContext::currentContext()->functions(); // We bind the textures in inverse order so that we leave the updateState // function with GL_TEXTURE0 as the active texture unit. This is maintain // the "contract" that updateState should not mess up the GL state beyond // what is needed for this material. f->glActiveTexture(GL_TEXTURE1); state->texture2->bind(); f->glActiveTexture(GL_TEXTURE0); state->texture1->bind(); } void resolveUniforms() override { // The texture units never change, only the texturess we bind to them so // we set these once and for all here. program()->setUniformValue("uSource1", 0); // GL_TEXTURE0 program()->setUniformValue("uSource2", 1); // GL_TEXTURE1 } }; /* The rendering is split into two nodes. The top-most node is not actually * rendering anything, but is responsible for managing the texture providers. * The XorNode also has a geometry node internally which it uses to render * the texture providers using the XorBlendShader when all providers and * textures are all present. * * The texture providers are updated solely on the render thread (when rendering * is happening on a separate thread). This is why we are using preprocess * and direct signals between the the texture providers and the node rather * than updating state in updatePaintNode. */ class XorNode : public QObject, public QSGNode { Q_OBJECT public: XorNode(QSGTextureProvider *p1, QSGTextureProvider *p2) : m_provider1(p1) , m_provider2(p2) { setFlag(QSGNode::UsePreprocess, true); // Set up material so it is all set for later.. m_material = XorBlendShader::createMaterial(); m_material->state()->texture1 = nullptr; m_material->state()->texture2 = nullptr; m_material->setFlag(QSGMaterial::Blending); m_node.setMaterial(m_material); m_node.setFlag(QSGNode::OwnsMaterial); // Set up geometry, actual vertices will be initialized in updatePaintNode m_node.setGeometry(new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(), 4)); m_node.setFlag(QSGNode::OwnsGeometry); // If this node is used as in a shader effect source, we need to propegate // changes that will occur in this node outwards. connect(m_provider1.data(), &QSGTextureProvider::textureChanged, this, &XorNode::textureChange, Qt::DirectConnection); connect(m_provider2.data(), &QSGTextureProvider::textureChanged, this, &XorNode::textureChange, Qt::DirectConnection); } void preprocess() override { XorBlendState *state = m_material->state(); // Update the textures from the providers, calling into QSGDynamicTexture if required if (m_provider1) { state->texture1 = m_provider1->texture(); if (QSGDynamicTexture *dt1 = qobject_cast<QSGDynamicTexture *>(state->texture1)) dt1->updateTexture(); } if (m_provider2) { state->texture2 = m_provider2->texture(); if (QSGDynamicTexture *dt2 = qobject_cast<QSGDynamicTexture *>(state->texture2)) dt2->updateTexture(); } // Remove node from the scene graph if it is there and either texture is missing... if (m_node.parent() && (!state->texture1 || !state->texture2)) removeChildNode(&m_node); // Add it if it is not already there and both textures are present.. else if (!m_node.parent() && state->texture1 && state->texture2) appendChildNode(&m_node); } void setRect(const QRectF &rect) { // Update geometry if it has changed and mark the change in the scene graph. if (m_rect != rect) { m_rect = rect; QSGGeometry::updateTexturedRectGeometry(m_node.geometry(), m_rect, QRectF(0, 0, 1, 1)); m_node.markDirty(QSGNode::DirtyGeometry); } } public slots: void textureChange() { // When our sources change, we will look different, so signal the change to the // scene graph. markDirty(QSGNode::DirtyMaterial); } private: QRectF m_rect; QSGSimpleMaterial<XorBlendState> *m_material; QSGGeometryNode m_node; QPointer<QSGTextureProvider> m_provider1; QPointer<QSGTextureProvider> m_provider2; }; XorBlender::XorBlender(QQuickItem *parent) : QQuickItem(parent) , m_source1(nullptr) , m_source2(nullptr) , m_source1Changed(false) , m_source2Changed(false) { setFlag(ItemHasContents, true); } void XorBlender::setSource1(QQuickItem *i) { if (i == m_source1) return; m_source1 = i; emit source1Changed(m_source1); m_source1Changed = true; update(); } void XorBlender::setSource2(QQuickItem *i) { if (i == m_source2) return; m_source2 = i; emit source2Changed(m_source2); m_source2Changed = true; update(); } QSGNode *XorBlender::updatePaintNode(QSGNode *old, UpdatePaintNodeData *) { // Check if our input is valid and abort if not, deleting the old node. bool abort = false; if (!m_source1 || !m_source1->isTextureProvider()) { qDebug() << "source1 is missing or not a texture provider"; abort = true; } if (!m_source2 || !m_source2->isTextureProvider()) { qDebug() << "source2 is missing or not a texture provider"; abort = true; } if (abort) { delete old; return nullptr; } XorNode *node = static_cast<XorNode *>(old); // If the sources have changed, recreate the nodes if (m_source1Changed || m_source2Changed) { delete node; node = nullptr; m_source1Changed = false; m_source2Changed = false; } // Create a new XorNode for us to render with. if (!node) node = new XorNode(m_source1->textureProvider(), m_source2->textureProvider()); // Update the geometry of the node to match the new bounding rect node->setRect(boundingRect()); return node; } #include "xorblender.moc"

© 2018 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.