Before you can deploy and test your Qt application on hardware, you must flash the target device with an image that contains the Boot to Qt stack. These steps vary from device to device:
- Boundary Devices i.MX6 Boards
- SABRE SD i.MX6Quad
- Toradex Apalis iMX6
- Toradex Colibri iMX6
- Toradex Colibri VF50 and VF61
- Kontron SMARC-sAMX6i
- BeagleBone Black
- Raspberry Pi 3 Model B
- Intel NUC
- NVIDIA DRIVE CX
If you use only the emulator, you can skip this step and continue straight to Building and Running an Example.
Available under certain Qt licenses.
Find out more.