main.cpp Example File

basicshapes-cpp/main.cpp
/****************************************************************************
**
** Copyright (C) 2014 Klaralvdalens Datakonsult AB (KDAB).
** Contact: https://www.qt.io/licensing/
**
** This file is part of the Qt3D module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** BSD License Usage
** Alternatively, you may use this file under the terms of the BSD license
** as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of The Qt Company Ltd nor the names of its
**     contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "scenemodifier.h"

#include <QGuiApplication>

#include <Qt3DRender/qcamera.h>
#include <Qt3DCore/qentity.h>
#include <Qt3DRender/qcameralens.h>

#include <QtWidgets/QApplication>
#include <QtWidgets/QWidget>
#include <QtWidgets/QHBoxLayout>
#include <QtWidgets/QCheckBox>
#include <QtWidgets/QCommandLinkButton>
#include <QtGui/QScreen>

#include <Qt3DInput/QInputAspect>

#include <Qt3DExtras/qtorusmesh.h>
#include <Qt3DRender/qmesh.h>
#include <Qt3DRender/qtechnique.h>
#include <Qt3DRender/qmaterial.h>
#include <Qt3DRender/qeffect.h>
#include <Qt3DRender/qtexture.h>
#include <Qt3DRender/qrenderpass.h>
#include <Qt3DRender/qsceneloader.h>
#include <Qt3DRender/qpointlight.h>

#include <Qt3DCore/qtransform.h>
#include <Qt3DCore/qaspectengine.h>

#include <Qt3DRender/qrenderaspect.h>
#include <Qt3DExtras/qforwardrenderer.h>

#include <Qt3DExtras/qt3dwindow.h>
#include <Qt3DExtras/qfirstpersoncameracontroller.h>

int main(int argc, char **argv)
{
    QApplication app(argc, argv);
    Qt3DExtras::Qt3DWindow *view = new Qt3DExtras::Qt3DWindow();
    view->defaultFrameGraph()->setClearColor(QColor(QRgb(0x4d4d4f)));
    QWidget *container = QWidget::createWindowContainer(view);
    QSize screenSize = view->screen()->size();
    container->setMinimumSize(QSize(200, 100));
    container->setMaximumSize(screenSize);

    QWidget *widget = new QWidget;
    QHBoxLayout *hLayout = new QHBoxLayout(widget);
    QVBoxLayout *vLayout = new QVBoxLayout();
    vLayout->setAlignment(Qt::AlignTop);
    hLayout->addWidget(container, 1);
    hLayout->addLayout(vLayout);

    widget->setWindowTitle(QStringLiteral("Basic shapes"));

    Qt3DInput::QInputAspect *input = new Qt3DInput::QInputAspect;
    view->registerAspect(input);

    // Root entity
    Qt3DCore::QEntity *rootEntity = new Qt3DCore::QEntity();

    // Camera
    Qt3DRender::QCamera *cameraEntity = view->camera();

    cameraEntity->lens()->setPerspectiveProjection(45.0f, 16.0f/9.0f, 0.1f, 1000.0f);
    cameraEntity->setPosition(QVector3D(0, 0, 20.0f));
    cameraEntity->setUpVector(QVector3D(0, 1, 0));
    cameraEntity->setViewCenter(QVector3D(0, 0, 0));

    Qt3DCore::QEntity *lightEntity = new Qt3DCore::QEntity(rootEntity);
    Qt3DRender::QPointLight *light = new Qt3DRender::QPointLight(lightEntity);
    light->setColor("white");
    light->setIntensity(1);
    lightEntity->addComponent(light);
    Qt3DCore::QTransform *lightTransform = new Qt3DCore::QTransform(lightEntity);
    lightTransform->setTranslation(cameraEntity->position());
    lightEntity->addComponent(lightTransform);

    // For camera controls
    Qt3DExtras::QFirstPersonCameraController *camController = new Qt3DExtras::QFirstPersonCameraController(rootEntity);
    camController->setCamera(cameraEntity);

    // Scenemodifier
    SceneModifier *modifier = new SceneModifier(rootEntity);

    // Set root object of the scene
    view->setRootEntity(rootEntity);

    // Create control widgets
    QCommandLinkButton *info = new QCommandLinkButton();
    info->setText(QStringLiteral("Qt3D ready-made meshes"));
    info->setDescription(QString::fromLatin1("Qt3D provides several ready-made meshes, like torus, cylinder, cone, "
                                             "cube, plane and sphere."));
    info->setIconSize(QSize(0,0));

    QCheckBox *torusCB = new QCheckBox(widget);
    torusCB->setChecked(true);
    torusCB->setText(QStringLiteral("Torus"));

    QCheckBox *coneCB = new QCheckBox(widget);
    coneCB->setChecked(true);
    coneCB->setText(QStringLiteral("Cone"));

    QCheckBox *cylinderCB = new QCheckBox(widget);
    cylinderCB->setChecked(true);
    cylinderCB->setText(QStringLiteral("Cylinder"));

    QCheckBox *cuboidCB = new QCheckBox(widget);
    cuboidCB->setChecked(true);
    cuboidCB->setText(QStringLiteral("Cuboid"));

    QCheckBox *planeCB = new QCheckBox(widget);
    planeCB->setChecked(true);
    planeCB->setText(QStringLiteral("Plane"));

    QCheckBox *sphereCB = new QCheckBox(widget);
    sphereCB->setChecked(true);
    sphereCB->setText(QStringLiteral("Sphere"));

    vLayout->addWidget(info);
    vLayout->addWidget(torusCB);
    vLayout->addWidget(coneCB);
    vLayout->addWidget(cylinderCB);
    vLayout->addWidget(cuboidCB);
    vLayout->addWidget(planeCB);
    vLayout->addWidget(sphereCB);

    QObject::connect(torusCB, &QCheckBox::stateChanged,
                     modifier, &SceneModifier::enableTorus);
    QObject::connect(coneCB, &QCheckBox::stateChanged,
                     modifier, &SceneModifier::enableCone);
    QObject::connect(cylinderCB, &QCheckBox::stateChanged,
                     modifier, &SceneModifier::enableCylinder);
    QObject::connect(cuboidCB, &QCheckBox::stateChanged,
                     modifier, &SceneModifier::enableCuboid);
    QObject::connect(planeCB, &QCheckBox::stateChanged,
                     modifier, &SceneModifier::enablePlane);
    QObject::connect(sphereCB, &QCheckBox::stateChanged,
                     modifier, &SceneModifier::enableSphere);

    torusCB->setChecked(true);
    coneCB->setChecked(true);
    cylinderCB->setChecked(true);
    cuboidCB->setChecked(true);
    planeCB->setChecked(true);
    sphereCB->setChecked(true);

    // Show window
    widget->show();
    widget->resize(1200, 800);

    return app.exec();
}

© 2016 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.