QProgressDialog Class

The QProgressDialog class provides feedback on the progress of a slow operation. More...

Header: #include <QProgressDialog>
Inherits: QDialog

Properties

  • 2 properties inherited from QDialog
  • 58 properties inherited from QWidget
  • 1 property inherited from QObject

Public Functions

QProgressDialog(QWidget * parent = 0, Qt::WindowFlags f = 0)
QProgressDialog(const QString & labelText, const QString & cancelButtonText, int minimum, int maximum, QWidget * parent = 0, Qt::WindowFlags f = 0)
~QProgressDialog()
bool autoClose() const
bool autoReset() const
QString labelText() const
int maximum() const
int minimum() const
int minimumDuration() const
void open(QObject * receiver, const char * member)
void setAutoClose(bool close)
void setAutoReset(bool reset)
void setBar(QProgressBar * bar)
void setCancelButton(QPushButton * cancelButton)
void setLabel(QLabel * label)
int value() const
bool wasCanceled() const

Reimplemented Public Functions

virtual QSize sizeHint() const
  • 8 public functions inherited from QDialog
  • 220 public functions inherited from QWidget
  • 29 public functions inherited from QObject
  • 12 public functions inherited from QPaintDevice

Public Slots

void cancel()
void reset()
void setCancelButtonText(const QString & cancelButtonText)
void setLabelText(const QString & text)
void setMaximum(int maximum)
void setMinimum(int minimum)
void setMinimumDuration(int ms)
void setRange(int minimum, int maximum)
void setValue(int progress)
  • 5 public slots inherited from QDialog
  • 19 public slots inherited from QWidget
  • 1 public slot inherited from QObject

Signals

void canceled()

Reimplemented Protected Functions

virtual void changeEvent(QEvent * ev)
virtual void closeEvent(QCloseEvent * e)
virtual void resizeEvent(QResizeEvent * event)
virtual void showEvent(QShowEvent * e)
  • 7 protected functions inherited from QDialog
  • 37 protected functions inherited from QWidget
  • 8 protected functions inherited from QObject
  • 1 protected function inherited from QPaintDevice

Protected Slots

void forceShow()
  • 1 protected slot inherited from QWidget

Additional Inherited Members

  • 4 static public members inherited from QWidget
  • 7 static public members inherited from QObject
  • 7 protected functions inherited from QDialog
  • 37 protected functions inherited from QWidget
  • 8 protected functions inherited from QObject
  • 1 protected function inherited from QPaintDevice

Detailed Description

The QProgressDialog class provides feedback on the progress of a slow operation.

A progress dialog is used to give the user an indication of how long an operation is going to take, and to demonstrate that the application has not frozen. It can also give the user an opportunity to abort the operation.

A common problem with progress dialogs is that it is difficult to know when to use them; operations take different amounts of time on different hardware. QProgressDialog offers a solution to this problem: it estimates the time the operation will take (based on time for steps), and only shows itself if that estimate is beyond minimumDuration() (4 seconds by default).

Use setMinimum() and setMaximum() or the constructor to set the number of "steps" in the operation and call setValue() as the operation progresses. The number of steps can be chosen arbitrarily. It can be the number of files copied, the number of bytes received, the number of iterations through the main loop of your algorithm, or some other suitable unit. Progress starts at the value set by setMinimum(), and the progress dialog shows that the operation has finished when you call setValue() with the value set by setMaximum() as its argument.

The dialog automatically resets and hides itself at the end of the operation. Use setAutoReset() and setAutoClose() to change this behavior. Note that if you set a new maximum (using setMaximum() or setRange()) that equals your current value(), the dialog will not close regardless.

There are two ways of using QProgressDialog: modal and modeless.

Compared to a modeless QProgressDialog, a modal QProgressDialog is simpler to use for the programmer. Do the operation in a loop, call setValue() at intervals, and check for cancellation with wasCanceled(). For example:

    QProgressDialog progress("Copying files...", "Abort Copy", 0, numFiles, this);
    progress.setWindowModality(Qt::WindowModal);

    for (int i = 0; i < numFiles; i++) {
        progress.setValue(i);

        if (progress.wasCanceled())
            break;
        //... copy one file
    }
    progress.setValue(numFiles);

A modeless progress dialog is suitable for operations that take place in the background, where the user is able to interact with the application. Such operations are typically based on QTimer (or QObject::timerEvent()), QSocketNotifier, or QUrlOperator; or performed in a separate thread. A QProgressBar in the status bar of your main window is often an alternative to a modeless progress dialog.

You need to have an event loop to be running, connect the canceled() signal to a slot that stops the operation, and call setValue() at intervals. For example:

// Operation constructor
Operation::Operation(QObject *parent)
    : QObject(parent), steps(0)
{
    pd = new QProgressDialog("Operation in progress.", "Cancel", 0, 100);
    connect(pd, SIGNAL(canceled()), this, SLOT(cancel()));
    t = new QTimer(this);
    connect(t, SIGNAL(timeout()), this, SLOT(perform()));
    t->start(0);
}

void Operation::perform()
{
    pd->setValue(steps);
    //... perform one percent of the operation
    steps++;
    if (steps > pd->maximum())
        t->stop();
}

void Operation::cancel()
{
    t->stop();
    //... cleanup
}

In both modes the progress dialog may be customized by replacing the child widgets with custom widgets by using setLabel(), setBar(), and setCancelButton(). The functions setLabelText() and setCancelButtonText() set the texts shown.

A progress dialog shown in the Plastique widget style.

See also QDialog, QProgressBar, GUI Design Handbook: Progress Indicator, Find Files Example, and Pixelator Example.

Property Documentation

autoClose : bool

This property holds whether the dialog gets hidden by reset().

The default is true.

Access functions:

bool autoClose() const
void setAutoClose(bool close)

See also setAutoReset().

autoReset : bool

This property holds whether the progress dialog calls reset() as soon as value() equals maximum().

The default is true.

Access functions:

bool autoReset() const
void setAutoReset(bool reset)

See also setAutoClose().

labelText : QString

This property holds the label's text.

The default text is an empty string.

Access functions:

QString labelText() const
void setLabelText(const QString & text)

maximum : int

This property holds the highest value represented by the progress bar.

The default is 0.

Access functions:

int maximum() const
void setMaximum(int maximum)

See also minimum and setRange().

minimum : int

This property holds the lowest value represented by the progress bar.

The default is 0.

Access functions:

int minimum() const
void setMinimum(int minimum)

See also maximum and setRange().

minimumDuration : int

This property holds the time that must pass before the dialog appears.

If the expected duration of the task is less than the minimumDuration, the dialog will not appear at all. This prevents the dialog popping up for tasks that are quickly over. For tasks that are expected to exceed the minimumDuration, the dialog will pop up after the minimumDuration time or as soon as any progress is set.

If set to 0, the dialog is always shown as soon as any progress is set. The default is 4000 milliseconds.

Access functions:

int minimumDuration() const
void setMinimumDuration(int ms)

value : int

This property holds the current amount of progress made.

For the progress dialog to work as expected, you should initially set this property to 0 and finally set it to QProgressDialog::maximum(); you can call setValue() any number of times in-between.

Warning: If the progress dialog is modal (see QProgressDialog::QProgressDialog()), setValue() calls QApplication::processEvents(), so take care that this does not cause undesirable re-entrancy in your code. For example, don't use a QProgressDialog inside a paintEvent()!

Access functions:

int value() const
void setValue(int progress)

See also minimum and maximum.

wasCanceled : const bool

This property holds whether the dialog was canceled.

Access functions:

bool wasCanceled() const

Member Function Documentation

QProgressDialog::QProgressDialog(QWidget * parent = 0, Qt::WindowFlags f = 0)

Constructs a progress dialog.

Default settings:

  • The label text is empty.
  • The cancel button text is (translated) "Cancel".
  • minimum is 0;
  • maximum is 100

The parent argument is dialog's parent widget. The widget flags, f, are passed to the QDialog::QDialog() constructor.

See also setLabelText(), setCancelButtonText(), setCancelButton(), setMinimum(), and setMaximum().

QProgressDialog::QProgressDialog(const QString & labelText, const QString & cancelButtonText, int minimum, int maximum, QWidget * parent = 0, Qt::WindowFlags f = 0)

Constructs a progress dialog.

The labelText is the text used to remind the user what is progressing.

The cancelButtonText is the text to display on the cancel button. If QString() is passed then no cancel button is shown.

The minimum and maximum is the number of steps in the operation for which this progress dialog shows progress. For example, if the operation is to examine 50 files, this value minimum value would be 0, and the maximum would be 50. Before examining the first file, call setValue(0). As each file is processed call setValue(1), setValue(2), etc., finally calling setValue(50) after examining the last file.

The parent argument is the dialog's parent widget. The parent, parent, and widget flags, f, are passed to the QDialog::QDialog() constructor.

See also setLabelText(), setLabel(), setCancelButtonText(), setCancelButton(), setMinimum(), and setMaximum().

QProgressDialog::~QProgressDialog()

Destroys the progress dialog.

[slot] void QProgressDialog::cancel()

Resets the progress dialog. wasCanceled() becomes true until the progress dialog is reset. The progress dialog becomes hidden.

[signal] void QProgressDialog::canceled()

This signal is emitted when the cancel button is clicked. It is connected to the cancel() slot by default.

See also wasCanceled().

[virtual protected] void QProgressDialog::changeEvent(QEvent * ev)

Reimplemented from QWidget::changeEvent().

[virtual protected] void QProgressDialog::closeEvent(QCloseEvent * e)

Reimplemented from QWidget::closeEvent().

[protected slot] void QProgressDialog::forceShow()

Shows the dialog if it is still hidden after the algorithm has been started and minimumDuration milliseconds have passed.

See also setMinimumDuration().

void QProgressDialog::open(QObject * receiver, const char * member)

This is an overloaded function.

Opens the dialog and connects its accepted() signal to the slot specified by receiver and member.

The signal will be disconnected from the slot when the dialog is closed.

This function was introduced in Qt 4.5.

[slot] void QProgressDialog::reset()

Resets the progress dialog. The progress dialog becomes hidden if autoClose() is true.

See also setAutoClose() and setAutoReset().

[virtual protected] void QProgressDialog::resizeEvent(QResizeEvent * event)

Reimplemented from QWidget::resizeEvent().

void QProgressDialog::setBar(QProgressBar * bar)

Sets the progress bar widget to bar. The progress dialog resizes to fit. The progress dialog takes ownership of the progress bar which will be deleted when necessary, so do not use a progress bar allocated on the stack.

void QProgressDialog::setCancelButton(QPushButton * cancelButton)

Sets the cancel button to the push button, cancelButton. The progress dialog takes ownership of this button which will be deleted when necessary, so do not pass the address of an object that is on the stack, i.e. use new() to create the button. If 0 is passed then no cancel button will be shown.

See also setCancelButtonText().

[slot] void QProgressDialog::setCancelButtonText(const QString & cancelButtonText)

Sets the cancel button's text to cancelButtonText. If the text is set to QString() then it will cause the cancel button to be hidden and deleted.

See also setCancelButton().

void QProgressDialog::setLabel(QLabel * label)

Sets the label to label. The progress dialog resizes to fit. The label becomes owned by the progress dialog and will be deleted when necessary, so do not pass the address of an object on the stack.

See also setLabelText().

[slot] void QProgressDialog::setRange(int minimum, int maximum)

Sets the progress dialog's minimum and maximum values to minimum and maximum, respectively.

If maximum is smaller than minimum, minimum becomes the only legal value.

If the current value falls outside the new range, the progress dialog is reset with reset().

See also minimum and maximum.

[virtual protected] void QProgressDialog::showEvent(QShowEvent * e)

Reimplemented from QWidget::showEvent().

[virtual] QSize QProgressDialog::sizeHint() const

Reimplemented from QWidget::sizeHint().

Returns a size that fits the contents of the progress dialog. The progress dialog resizes itself as required, so you should not need to call this yourself.

© 2016 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.