QBoxLayout Class

The QBoxLayout class lines up child widgets horizontally or vertically. More...

Header: #include <QBoxLayout>
qmake: QT += widgets
Inherits: QLayout
Inherited By:

QHBoxLayout and QVBoxLayout

Public Types

enum Direction { LeftToRight, RightToLeft, TopToBottom, BottomToTop }

Public Functions

QBoxLayout(Direction dir, QWidget * parent = 0)
~QBoxLayout()
void addLayout(QLayout * layout, int stretch = 0)
void addSpacerItem(QSpacerItem * spacerItem)
void addSpacing(int size)
void addStretch(int stretch = 0)
void addStrut(int size)
void addWidget(QWidget * widget, int stretch = 0, Qt::Alignment alignment = 0)
Direction direction() const
void insertItem(int index, QLayoutItem * item)
void insertLayout(int index, QLayout * layout, int stretch = 0)
void insertSpacerItem(int index, QSpacerItem * spacerItem)
void insertSpacing(int index, int size)
void insertStretch(int index, int stretch = 0)
void insertWidget(int index, QWidget * widget, int stretch = 0, Qt::Alignment alignment = 0)
void setDirection(Direction direction)
void setSpacing(int spacing)
void setStretch(int index, int stretch)
bool setStretchFactor(QWidget * widget, int stretch)
bool setStretchFactor(QLayout * layout, int stretch)
int spacing() const
int stretch(int index) const

Reimplemented Public Functions

virtual void addItem(QLayoutItem * item)
virtual int count() const
virtual Qt::Orientations expandingDirections() const
virtual bool hasHeightForWidth() const
virtual int heightForWidth(int w) const
virtual void invalidate()
virtual QLayoutItem * itemAt(int index) const
virtual QSize maximumSize() const
virtual int minimumHeightForWidth(int w) const
virtual QSize minimumSize() const
virtual void setGeometry(const QRect & r)
virtual QSize sizeHint() const
virtual QLayoutItem * takeAt(int index)
  • 36 public functions inherited from QLayout
  • 31 public functions inherited from QObject
  • 17 public functions inherited from QLayoutItem

Additional Inherited Members

  • 2 properties inherited from QLayout
  • 1 property inherited from QObject
  • 1 public slot inherited from QObject
  • 2 signals inherited from QObject
  • 1 static public member inherited from QLayout
  • 11 static public members inherited from QObject
  • 4 protected functions inherited from QLayout
  • 9 protected functions inherited from QObject

Detailed Description

The QBoxLayout class lines up child widgets horizontally or vertically.

QBoxLayout takes the space it gets (from its parent layout or from the parentWidget()), divides it up into a row of boxes, and makes each managed widget fill one box.

Horizontal box layout with five child widgets

If the QBoxLayout's orientation is Qt::Horizontal the boxes are placed in a row, with suitable sizes. Each widget (or other box) will get at least its minimum size and at most its maximum size. Any excess space is shared according to the stretch factors (more about that below).

Vertical box layout with five child widgets

If the QBoxLayout's orientation is Qt::Vertical, the boxes are placed in a column, again with suitable sizes.

The easiest way to create a QBoxLayout is to use one of the convenience classes, e.g. QHBoxLayout (for Qt::Horizontal boxes) or QVBoxLayout (for Qt::Vertical boxes). You can also use the QBoxLayout constructor directly, specifying its direction as LeftToRight, RightToLeft, TopToBottom, or BottomToTop.

If the QBoxLayout is not the top-level layout (i.e. it is not managing all of the widget's area and children), you must add it to its parent layout before you can do anything with it. The normal way to add a layout is by calling parentLayout->addLayout().

Once you have done this, you can add boxes to the QBoxLayout using one of four functions:

  • addWidget() to add a widget to the QBoxLayout and set the widget's stretch factor. (The stretch factor is along the row of boxes.)
  • addSpacing() to create an empty box; this is one of the functions you use to create nice and spacious dialogs. See below for ways to set margins.
  • addStretch() to create an empty, stretchable box.
  • addLayout() to add a box containing another QLayout to the row and set that layout's stretch factor.

Use insertWidget(), insertSpacing(), insertStretch() or insertLayout() to insert a box at a specified position in the layout.

QBoxLayout also includes two margin widths:

  • setContentsMargins() sets the width of the outer border on each side of the widget. This is the width of the reserved space along each of the QBoxLayout's four sides.
  • setSpacing() sets the width between neighboring boxes. (You can use addSpacing() to get more space at a particular spot.)

The margin default is provided by the style. The default margin most Qt styles specify is 9 for child widgets and 11 for windows. The spacing defaults to the same as the margin width for a top-level layout, or to the same as the parent layout.

To remove a widget from a layout, call removeWidget(). Calling QWidget::hide() on a widget also effectively removes the widget from the layout until QWidget::show() is called.

You will almost always want to use QVBoxLayout and QHBoxLayout rather than QBoxLayout because of their convenient constructors.

See also QGridLayout, QStackedLayout, and Layout Management.

Member Type Documentation

enum QBoxLayout::Direction

This type is used to determine the direction of a box layout.

ConstantValueDescription
QBoxLayout::LeftToRight0Horizontal from left to right.
QBoxLayout::RightToLeft1Horizontal from right to left.
QBoxLayout::TopToBottom2Vertical from top to bottom.
QBoxLayout::BottomToTop3Vertical from bottom to top.

Member Function Documentation

QBoxLayout::QBoxLayout(Direction dir, QWidget * parent = 0)

Constructs a new QBoxLayout with direction dir and parent widget parent.

See also direction().

QBoxLayout::~QBoxLayout()

Destroys this box layout.

The layout's widgets aren't destroyed.

[virtual] void QBoxLayout::addItem(QLayoutItem * item)

Reimplemented from QLayout::addItem().

void QBoxLayout::addLayout(QLayout * layout, int stretch = 0)

Adds layout to the end of the box, with serial stretch factor stretch.

See also insertLayout(), addItem(), and addWidget().

void QBoxLayout::addSpacerItem(QSpacerItem * spacerItem)

Adds spacerItem to the end of this box layout.

This function was introduced in Qt 4.4.

See also addSpacing() and addStretch().

void QBoxLayout::addSpacing(int size)

Adds a non-stretchable space (a QSpacerItem) with size size to the end of this box layout. QBoxLayout provides default margin and spacing. This function adds additional space.

See also insertSpacing(), addItem(), and QSpacerItem.

void QBoxLayout::addStretch(int stretch = 0)

Adds a stretchable space (a QSpacerItem) with zero minimum size and stretch factor stretch to the end of this box layout.

See also insertStretch(), addItem(), and QSpacerItem.

void QBoxLayout::addStrut(int size)

Limits the perpendicular dimension of the box (e.g. height if the box is LeftToRight) to a minimum of size. Other constraints may increase the limit.

See also addItem().

void QBoxLayout::addWidget(QWidget * widget, int stretch = 0, Qt::Alignment alignment = 0)

Adds widget to the end of this box layout, with a stretch factor of stretch and alignment alignment.

The stretch factor applies only in the direction of the QBoxLayout, and is relative to the other boxes and widgets in this QBoxLayout. Widgets and boxes with higher stretch factors grow more.

If the stretch factor is 0 and nothing else in the QBoxLayout has a stretch factor greater than zero, the space is distributed according to the QWidget:sizePolicy() of each widget that's involved.

The alignment is specified by alignment. The default alignment is 0, which means that the widget fills the entire cell.

See also insertWidget(), addItem(), addLayout(), addStretch(), addSpacing(), and addStrut().

[virtual] int QBoxLayout::count() const

Reimplemented from QLayout::count().

Direction QBoxLayout::direction() const

Returns the direction of the box. addWidget() and addSpacing() work in this direction; the stretch stretches in this direction.

See also setDirection(), QBoxLayout::Direction, addWidget(), and addSpacing().

[virtual] Qt::Orientations QBoxLayout::expandingDirections() const

Reimplemented from QLayoutItem::expandingDirections().

[virtual] bool QBoxLayout::hasHeightForWidth() const

Reimplemented from QLayoutItem::hasHeightForWidth().

[virtual] int QBoxLayout::heightForWidth(int w) const

Reimplemented from QLayoutItem::heightForWidth().

void QBoxLayout::insertItem(int index, QLayoutItem * item)

Inserts item into this box layout at position index. If index is negative, the item is added at the end.

See also addItem(), insertWidget(), insertLayout(), insertStretch(), and insertSpacing().

void QBoxLayout::insertLayout(int index, QLayout * layout, int stretch = 0)

Inserts layout at position index, with stretch factor stretch. If index is negative, the layout is added at the end.

layout becomes a child of the box layout.

See also addLayout() and insertItem().

void QBoxLayout::insertSpacerItem(int index, QSpacerItem * spacerItem)

Inserts spacerItem at position index, with zero minimum size and stretch factor. If index is negative the space is added at the end.

This function was introduced in Qt 4.4.

See also addSpacerItem(), insertStretch(), and insertSpacing().

void QBoxLayout::insertSpacing(int index, int size)

Inserts a non-stretchable space (a QSpacerItem) at position index, with size size. If index is negative the space is added at the end.

The box layout has default margin and spacing. This function adds additional space.

See also addSpacing(), insertItem(), and QSpacerItem.

void QBoxLayout::insertStretch(int index, int stretch = 0)

Inserts a stretchable space (a QSpacerItem) at position index, with zero minimum size and stretch factor stretch. If index is negative the space is added at the end.

See also addStretch(), insertItem(), and QSpacerItem.

void QBoxLayout::insertWidget(int index, QWidget * widget, int stretch = 0, Qt::Alignment alignment = 0)

Inserts widget at position index, with stretch factor stretch and alignment alignment. If index is negative, the widget is added at the end.

The stretch factor applies only in the direction of the QBoxLayout, and is relative to the other boxes and widgets in this QBoxLayout. Widgets and boxes with higher stretch factors grow more.

If the stretch factor is 0 and nothing else in the QBoxLayout has a stretch factor greater than zero, the space is distributed according to the QWidget:sizePolicy() of each widget that's involved.

The alignment is specified by alignment. The default alignment is 0, which means that the widget fills the entire cell.

See also addWidget() and insertItem().

[virtual] void QBoxLayout::invalidate()

Reimplemented from QLayoutItem::invalidate().

Resets cached information.

[virtual] QLayoutItem * QBoxLayout::itemAt(int index) const

Reimplemented from QLayout::itemAt().

[virtual] QSize QBoxLayout::maximumSize() const

Reimplemented from QLayoutItem::maximumSize().

[virtual] int QBoxLayout::minimumHeightForWidth(int w) const

Reimplemented from QLayoutItem::minimumHeightForWidth().

[virtual] QSize QBoxLayout::minimumSize() const

Reimplemented from QLayoutItem::minimumSize().

void QBoxLayout::setDirection(Direction direction)

Sets the direction of this layout to direction.

See also direction().

[virtual] void QBoxLayout::setGeometry(const QRect & r)

Reimplemented from QLayoutItem::setGeometry().

void QBoxLayout::setSpacing(int spacing)

Reimplements QLayout::setSpacing(). Sets the spacing property to spacing.

See also QLayout::setSpacing() and spacing().

void QBoxLayout::setStretch(int index, int stretch)

Sets the stretch factor at position index. to stretch.

This function was introduced in Qt 4.5.

See also stretch().

bool QBoxLayout::setStretchFactor(QWidget * widget, int stretch)

Sets the stretch factor for widget to stretch and returns true if widget is found in this layout (not including child layouts); otherwise returns false.

See also setAlignment().

bool QBoxLayout::setStretchFactor(QLayout * layout, int stretch)

This is an overloaded function.

Sets the stretch factor for the layout layout to stretch and returns true if layout is found in this layout (not including child layouts); otherwise returns false.

[virtual] QSize QBoxLayout::sizeHint() const

Reimplemented from QLayoutItem::sizeHint().

int QBoxLayout::spacing() const

Reimplements QLayout::spacing(). If the spacing property is valid, that value is returned. Otherwise, a value for the spacing property is computed and returned. Since layout spacing in a widget is style dependent, if the parent is a widget, it queries the style for the (horizontal or vertical) spacing of the layout. Otherwise, the parent is a layout, and it queries the parent layout for the spacing().

See also QLayout::spacing() and setSpacing().

int QBoxLayout::stretch(int index) const

Returns the stretch factor at position index.

This function was introduced in Qt 4.5.

See also setStretch().

[virtual] QLayoutItem * QBoxLayout::takeAt(int index)

Reimplemented from QLayout::takeAt().

© 2016 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.