Configure an Embedded Linux Device
Building Qt for a given device requires a toolchain and a
sysroot. Additionally, some devices require vendor-specific adaptation code for EGL and OpenGL ES 2.0 support. This is not relevant for non-accelerated platforms, such as those that use the LinuxFB plugin, which is meant for software-based rendering only.
The qtbase/mkspecs/devices directory contains configuration and graphics adaptation code for a number of devices. For example, the
linux-rasp-pi2-g++ mkspec contains build settings such as the optimal compiler and linker flags for the Raspberry Pi 2 device. The mkspec also contains information about either an implementation of the eglfs hooks (vendor-specific adaptation code), or a reference to the suitable eglfs device integration plugin. The device is selected through the configure tool's
-device parameter. The name that follows after this argument must, at least partially, match one of the subdirectories under devices.
The following is an example configuration for the Raspberry Pi 2. For most Embedded Linux boards, the configure command looks similar:
./configure -release -opengl es2 -device linux-rasp-pi2-g++ -device-option CROSS_COMPILE=$TOOLCHAIN/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf- -sysroot $ROOTFS -prefix /usr/local/qt5
The most important parameters are
-sysroot. By specifying
-sysroot, the include files and libraries used by
configure's feature detection tests, as well as Qt itself, are taken from the specified location, instead of the host PC's standard locations. Consequently, installing development packages on the host machine has no relevance. For example, to get
libinput support, it is not sufficient or necessary to have the
libinput development headers and libraries installed on the host environment. Instead, the headers and the libraries for the target architecture, such as ARM, must be present in the
pkg-config is supported also when performing cross-compilation.
configure automatically sets
PKG_CONFIG_LIBDIR to make
pkg-config report compiler and linker settings based on the
sysroot instead of the host machine. This usually functions well without any further adjustments. However, environment variables such as
PKG_CONFIG_PATH must be unset for the host machine before running
configure. Otherwise, the Qt build may attempt to use inappropriate headers and libraries from the host system.
-sysroot results in automatically setting the
--sysroot argument when invoking the compiler. In some cases this is not desirable and can be disabled by passing
-hostprefix control the intended destination directory of the Qt build. In the above example the ARM build of Qt is expected to be placed in
/usr/local/qt5 on the target device. Note that running
make install does not deploy anything to the device. Instead, the
install step targets the directory specified by
extprefix which defaults to
prefix and is therefore optional. However, in many cases "polluting" the sysroot is not desirable and thus specifying
-extprefix becomes important. Finally,
-hostprefix allows separating host tools like qmake, rcc, uic from the binaries for the target. When given, such tools will be installed under the specified directory instead of
For more information, see Qt Configure Options.
© 2022 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.