padnavigator.cpp Example File

graphicsview/padnavigator/padnavigator.cpp
/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include "flippablepad.h" #include "padnavigator.h" #include "splashitem.h" #ifndef QT_NO_OPENGL #include <QtOpenGL> #else #include <QtWidgets> #endif PadNavigator::PadNavigator(const QSize &size, QWidget *parent) : QGraphicsView(parent) { // Splash item SplashItem *splash = new SplashItem; splash->setZValue(1); // Pad item FlippablePad *pad = new FlippablePad(size); QGraphicsRotation *flipRotation = new QGraphicsRotation(pad); QGraphicsRotation *xRotation = new QGraphicsRotation(pad); QGraphicsRotation *yRotation = new QGraphicsRotation(pad); flipRotation->setAxis(Qt::YAxis); xRotation->setAxis(Qt::YAxis); yRotation->setAxis(Qt::XAxis); pad->setTransformations(QList<QGraphicsTransform *>() << flipRotation << xRotation << yRotation); // Back (proxy widget) item QGraphicsProxyWidget *backItem = new QGraphicsProxyWidget(pad); QWidget *widget = new QWidget; form.setupUi(widget); form.hostName->setFocus(); backItem->setWidget(widget); backItem->setVisible(false); backItem->setFocus(); backItem->setCacheMode(QGraphicsItem::ItemCoordinateCache); const QRectF r = backItem->rect(); backItem->setTransform(QTransform() .rotate(180, Qt::YAxis) .translate(-r.width()/2, -r.height()/2)); // Selection item RoundRectItem *selectionItem = new RoundRectItem(QRectF(-60, -60, 120, 120), Qt::gray, pad); selectionItem->setZValue(0.5); // Splash animations QPropertyAnimation *smoothSplashMove = new QPropertyAnimation(splash, "y"); QPropertyAnimation *smoothSplashOpacity = new QPropertyAnimation(splash, "opacity"); smoothSplashMove->setEasingCurve(QEasingCurve::InQuad); smoothSplashMove->setDuration(250); smoothSplashOpacity->setDuration(250); // Selection animation QPropertyAnimation *smoothXSelection = new QPropertyAnimation(selectionItem, "x"); QPropertyAnimation *smoothYSelection = new QPropertyAnimation(selectionItem, "y"); QPropertyAnimation *smoothXRotation = new QPropertyAnimation(xRotation, "angle"); QPropertyAnimation *smoothYRotation = new QPropertyAnimation(yRotation, "angle"); smoothXSelection->setDuration(125); smoothYSelection->setDuration(125); smoothXRotation->setDuration(125); smoothYRotation->setDuration(125); smoothXSelection->setEasingCurve(QEasingCurve::InOutQuad); smoothYSelection->setEasingCurve(QEasingCurve::InOutQuad); smoothXRotation->setEasingCurve(QEasingCurve::InOutQuad); smoothYRotation->setEasingCurve(QEasingCurve::InOutQuad); // Flip animation setup QPropertyAnimation *smoothFlipRotation = new QPropertyAnimation(flipRotation, "angle"); QPropertyAnimation *smoothFlipScale = new QPropertyAnimation(pad, "scale"); QPropertyAnimation *smoothFlipXRotation = new QPropertyAnimation(xRotation, "angle"); QPropertyAnimation *smoothFlipYRotation = new QPropertyAnimation(yRotation, "angle"); QParallelAnimationGroup *flipAnimation = new QParallelAnimationGroup(this); smoothFlipScale->setDuration(500); smoothFlipRotation->setDuration(500); smoothFlipXRotation->setDuration(500); smoothFlipYRotation->setDuration(500); smoothFlipScale->setEasingCurve(QEasingCurve::InOutQuad); smoothFlipRotation->setEasingCurve(QEasingCurve::InOutQuad); smoothFlipXRotation->setEasingCurve(QEasingCurve::InOutQuad); smoothFlipYRotation->setEasingCurve(QEasingCurve::InOutQuad); smoothFlipScale->setKeyValueAt(0, qvariant_cast<qreal>(1.0)); smoothFlipScale->setKeyValueAt(0.5, qvariant_cast<qreal>(0.7)); smoothFlipScale->setKeyValueAt(1, qvariant_cast<qreal>(1.0)); flipAnimation->addAnimation(smoothFlipRotation); flipAnimation->addAnimation(smoothFlipScale); flipAnimation->addAnimation(smoothFlipXRotation); flipAnimation->addAnimation(smoothFlipYRotation); // Flip animation delayed property assignment QSequentialAnimationGroup *setVariablesSequence = new QSequentialAnimationGroup; QPropertyAnimation *setFillAnimation = new QPropertyAnimation(pad, "fill"); QPropertyAnimation *setBackItemVisibleAnimation = new QPropertyAnimation(backItem, "visible"); QPropertyAnimation *setSelectionItemVisibleAnimation = new QPropertyAnimation(selectionItem, "visible"); setFillAnimation->setDuration(0); setBackItemVisibleAnimation->setDuration(0); setSelectionItemVisibleAnimation->setDuration(0); setVariablesSequence->addPause(250); setVariablesSequence->addAnimation(setBackItemVisibleAnimation); setVariablesSequence->addAnimation(setSelectionItemVisibleAnimation); setVariablesSequence->addAnimation(setFillAnimation); flipAnimation->addAnimation(setVariablesSequence); // Build the state machine QStateMachine *stateMachine = new QStateMachine(this); QState *splashState = new QState(stateMachine); QState *frontState = new QState(stateMachine); QHistoryState *historyState = new QHistoryState(frontState); QState *backState = new QState(stateMachine); frontState->assignProperty(pad, "fill", false); frontState->assignProperty(splash, "opacity", 0.0); frontState->assignProperty(backItem, "visible", false); frontState->assignProperty(flipRotation, "angle", qvariant_cast<qreal>(0.0)); frontState->assignProperty(selectionItem, "visible", true); backState->assignProperty(pad, "fill", true); backState->assignProperty(backItem, "visible", true); backState->assignProperty(xRotation, "angle", qvariant_cast<qreal>(0.0)); backState->assignProperty(yRotation, "angle", qvariant_cast<qreal>(0.0)); backState->assignProperty(flipRotation, "angle", qvariant_cast<qreal>(180.0)); backState->assignProperty(selectionItem, "visible", false); stateMachine->addDefaultAnimation(smoothXRotation); stateMachine->addDefaultAnimation(smoothYRotation); stateMachine->addDefaultAnimation(smoothXSelection); stateMachine->addDefaultAnimation(smoothYSelection); stateMachine->setInitialState(splashState); // Transitions QEventTransition *anyKeyTransition = new QEventTransition(this, QEvent::KeyPress, splashState); anyKeyTransition->setTargetState(frontState); anyKeyTransition->addAnimation(smoothSplashMove); anyKeyTransition->addAnimation(smoothSplashOpacity); QKeyEventTransition *enterTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Enter, backState); QKeyEventTransition *returnTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Return, backState); QKeyEventTransition *backEnterTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Enter, frontState); QKeyEventTransition *backReturnTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Return, frontState); enterTransition->setTargetState(historyState); returnTransition->setTargetState(historyState); backEnterTransition->setTargetState(backState); backReturnTransition->setTargetState(backState); enterTransition->addAnimation(flipAnimation); returnTransition->addAnimation(flipAnimation); backEnterTransition->addAnimation(flipAnimation); backReturnTransition->addAnimation(flipAnimation); // Create substates for each icon; store in temporary grid. int columns = size.width(); int rows = size.height(); QVector< QVector< QState * > > stateGrid; stateGrid.resize(rows); for (int y = 0; y < rows; ++y) { stateGrid[y].resize(columns); for (int x = 0; x < columns; ++x) stateGrid[y][x] = new QState(frontState); } frontState->setInitialState(stateGrid[0][0]); selectionItem->setPos(pad->iconAt(0, 0)->pos()); // Enable key navigation using state transitions for (int y = 0; y < rows; ++y) { for (int x = 0; x < columns; ++x) { QState *state = stateGrid[y][x]; QKeyEventTransition *rightTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Right, state); QKeyEventTransition *leftTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Left, state); QKeyEventTransition *downTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Down, state); QKeyEventTransition *upTransition = new QKeyEventTransition(this, QEvent::KeyPress, Qt::Key_Up, state); rightTransition->setTargetState(stateGrid[y][(x + 1) % columns]); leftTransition->setTargetState(stateGrid[y][((x - 1) + columns) % columns]); downTransition->setTargetState(stateGrid[(y + 1) % rows][x]); upTransition->setTargetState(stateGrid[((y - 1) + rows) % rows][x]); RoundRectItem *icon = pad->iconAt(x, y); state->assignProperty(xRotation, "angle", -icon->x() / 6.0); state->assignProperty(yRotation, "angle", icon->y() / 6.0); state->assignProperty(selectionItem, "x", icon->x()); state->assignProperty(selectionItem, "y", icon->y()); frontState->assignProperty(icon, "visible", true); backState->assignProperty(icon, "visible", false); QPropertyAnimation *setIconVisibleAnimation = new QPropertyAnimation(icon, "visible"); setIconVisibleAnimation->setDuration(0); setVariablesSequence->addAnimation(setIconVisibleAnimation); } } // Scene QGraphicsScene *scene = new QGraphicsScene(this); scene->setBackgroundBrush(QPixmap(":/images/blue_angle_swirl.jpg")); scene->setItemIndexMethod(QGraphicsScene::NoIndex); scene->addItem(pad); scene->setSceneRect(scene->itemsBoundingRect()); setScene(scene); // Adjust splash item to scene contents const QRectF sbr = splash->boundingRect(); splash->setPos(-sbr.width() / 2, scene->sceneRect().top() - 2); frontState->assignProperty(splash, "y", splash->y() - 100.0); scene->addItem(splash); // View setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff); setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff); setMinimumSize(50, 50); setViewportUpdateMode(FullViewportUpdate); setCacheMode(CacheBackground); setRenderHints(QPainter::Antialiasing | QPainter::SmoothPixmapTransform | QPainter::TextAntialiasing); #ifndef QT_NO_OPENGL setViewport(new QOpenGLWidget); #endif stateMachine->start(); } void PadNavigator::resizeEvent(QResizeEvent *event) { QGraphicsView::resizeEvent(event); fitInView(scene()->sceneRect(), Qt::KeepAspectRatio); }

© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.