The Style Sheet Syntax

Qt Style Sheet terminology and syntactic rules are almost identical to those of HTML CSS. If you already know CSS, you can probably skim quickly through this section.

Style Rules

Style sheets consist of a sequence of style rules. A style rule is made up of a selector and a declaration. The selector specifies which widgets are affected by the rule; the declaration specifies which properties should be set on the widget. For example:

QPushButton { color: red }

In the above style rule, QPushButton is the selector and { color: red } is the declaration. The rule specifies that QPushButton and its subclasses (e.g., MyPushButton) should use red as their foreground color.

Qt Style Sheet is generally case insensitive (i.e., color, Color, COLOR, and cOloR refer to the same property). The only exceptions are class names, object names , and Qt property names, which are case sensitive.

Several selectors can be specified for the same declaration, using commas (,) to separate the selectors. For example, the rule

QPushButton, QLineEdit, QComboBox { color: red }

is equivalent to this sequence of three rules:

QPushButton { color: red }
QLineEdit { color: red }
QComboBox { color: red }

The declaration part of a style rule is a list of property:value pairs, enclosed in braces ({}) and separated with semicolons. For example:

QPushButton { color: red; background-color: white }

See the List of Properties section below for the list of properties provided by Qt widgets.

Selector Types

All the examples so far used the simplest type of selector, the Type Selector. Qt Style Sheets support all the selectors defined in CSS2 . The table below summarizes the most useful types of selectors.

Selector

Example

Explanation

Universal Selector

*

Matches all widgets.

Type Selector

QPushButton

Matches instances of QPushButton and of its subclasses.

Property Selector

QPushButton[flat="false"]

Matches instances of QPushButton that are not flat . You may use this selector to test for any Qt property that supports toString() (see the toString() function documentation for details). In addition, the special class property is supported, for the name of the class.

This selector may also be used to test dynamic properties. For more information on customization using dynamic properties, refer to Customizing Using Dynamic Properties .

Instead of =, you can also use ~= to test whether a Qt property of type QStringList contains a given QString .

Warning

If the value of the Qt property changes after the style sheet has been set, it might be necessary to force a style sheet recomputation. One way to achieve this is to unset the style sheet and set it again.

Class Selector

.QPushButton

Matches instances of QPushButton , but not of its subclasses.

This is equivalent to *[class~="QPushButton"].

ID .. _id-selector: Selector

QPushButton#okButton

Matches all QPushButton instances whose object name is okButton.

Descendant Selector

QDialog QPushButton

Matches all instances of QPushButton that are descendants (children, grandchildren, etc.) of a QDialog .

Child Selector

QDialog > QPushButton

Matches all instances of QPushButton that are direct children of a QDialog .

Sub-Controls

For styling complex widgets, it is necessary to access subcontrols of the widget, such as the drop-down button of a QComboBox or the up and down arrows of a QSpinBox . Selectors may contain subcontrols that make it possible to restrict the application of a rule to specific widget subcontrols. For example:

QComboBox::drop-down { image: url(dropdown.png) }

The above rule styles the drop-down button of all QComboBox es. Although the double-colon (::) syntax is reminiscent of CSS3 Pseudo-Elements, Qt Sub-Controls differ conceptually from these and have different cascading semantics.

Sub-controls are always positioned with respect to another element - a reference element. This reference element could be the widget or another Sub-control. For example, the ::drop-down of a QComboBox is placed, by default, in the top right corner of the Padding rectangle of the QComboBox . The ::drop-down is placed, by default, in the Center of the Contents rectangle of the ::drop-down Sub-control. See the List of Stylable Widgets below for the Sub-controls to use to style a widget and their default positions.

The origin rectangle to be used can be changed using the subcontrol-origin property. For example, if we want to place the drop-down in the margin rectangle of the QComboBox instead of the default Padding rectangle, we can specify:

QComboBox {
    margin-right: 20px;
}
QComboBox::drop-down {
    subcontrol-origin: margin;
}

The alignment of the drop-down within the Margin rectangle is changed using subcontrol-position property.

The width and height properties can be used to control the size of the Sub-control. Note that setting a image implicitly sets the size of a Sub-control.

The relative positioning scheme ( position : relative), allows the position of the Sub-Control to be offset from its initial position. For example, when the QComboBox ‘s drop-down button is pressed, we might like the arrow inside to be offset to give a “pressed” effect. To achieve this, we can specify:

QComboBox::down-arrow {
    image: url(down_arrow.png);
}
QComboBox::down-arrow:pressed {
    position: relative;
    top: 1px; left: 1px;
}

The absolute positioning scheme ( position : absolute), allows the position and size of the Sub-control to be changed with respect to the reference element.

Once positioned, they are treated the same as widgets and can be styled using the box model .

See the List of Sub-Controls below for a list of supported sub-controls, and Customizing the QPushButton’s Menu Indicator Sub-Control for a realistic example.

Note

With complex widgets such as QComboBox and QScrollBar , if one property or sub-control is customized, all the other properties or sub-controls must be customized as well.

Pseudo-States

Selectors may contain pseudo-states that denote that restrict the application of the rule based on the widget’s state. Pseudo-states appear at the end of the selector, with a colon (:) in between. For example, the following rule applies when the mouse hovers over a QPushButton :

QPushButton:hover { color: white }

Pseudo-states can be negated using the exclamation operator. For example, the following rule applies when the mouse does not hover over a QRadioButton :

QRadioButton:!hover { color: red }

Pseudo-states can be chained, in which case a logical AND is implied. For example, the following rule applies to when the mouse hovers over a checked QCheckBox :

QCheckBox:hover:checked { color: white }

Negated Pseudo-states may appear in Pseudo-state chains. For example, the following rule applies when the mouse hovers over a QPushButton that is not pressed:

QPushButton:hover:!pressed { color: blue; }

If needed, logical OR can be expressed using the comma operator:

QCheckBox:hover, QCheckBox:checked { color: white }

Pseudo-states can appear in combination with subcontrols. For example:

QComboBox::drop-down:hover { image: url(dropdown_bright.png) }

See the List of Pseudo-States section below for the list of pseudo-states provided by Qt widgets.

Conflict Resolution

Conflicts arise when several style rules specify the same properties with different values. Consider the following style sheet:

QPushButton#okButton { color: gray }
QPushButton { color: red }

Both rules match QPushButton instances called okButton and there is a conflict for the color property. To resolve this conflict, we must take into account the specificity of the selectors. In the above example, QPushButton#okButton is considered more specific than QPushButton, because it (usually) refers to a single object, not to all instances of a class.

Similarly, selectors with pseudo-states are more specific than ones that do not specify pseudo-states. Thus, the following style sheet specifies that a QPushButton should have white text when the mouse is hovering over it, otherwise red text:

QPushButton:hover { color: white }
QPushButton { color: red }

Here’s a tricky one:

QPushButton:hover { color: white }
QPushButton:enabled { color: red }

Here, both selectors have the same specificity, so if the mouse hovers over the button while it is enabled, the second rule takes precedence. If we want the text to be white in that case, we can reorder the rules like this:

QPushButton:enabled { color: red }
QPushButton:hover { color: white }

Alternatively, we can make the first rule more specific:

QPushButton:hover:enabled { color: white }
QPushButton:enabled { color: red }

A similar issue arises in conjunction with Type Selectors. Consider the following example:

QPushButton { color: red }
QAbstractButton { color: gray }

Both rules apply to QPushButton instances (since QPushButton inherits QAbstractButton ) and there is a conflict for the color property. Because QPushButton inherits QAbstractButton , it might be tempting to assume that QPushButton is more specific than QAbstractButton. However, for style sheet computations, all Type Selectors have the same specificity, and the rule that appears last takes precedence. In other words, color is set to gray for all QAbstractButton s, including QPushButton s. If we really want QPushButton s to have red text, we can always reorder the rules.

For determining the specificity of a rule, Qt Style Sheets follow the CSS2 Specification :

A selector’s specificity is calculated as follows:

  • count the number of ID attributes in the selector (= a)

  • count the number of other attributes and pseudo-classes in the selector (= b)

  • count the number of element names in the selector (= c)

  • ignore pseudo-elements [i.e., subcontrols ].

Concatenating the three numbers a-b-c (in a number system with a large base) gives the specificity.

Some examples:

*             {}  /* a=0 b=0 c=0 -> specificity =   0 */
LI            {}  /* a=0 b=0 c=1 -> specificity =   1 */
UL LI         {}  /* a=0 b=0 c=2 -> specificity =   2 */
UL OL+LI      {}  /* a=0 b=0 c=3 -> specificity =   3 */
H1 + *[REL=up]{}  /* a=0 b=1 c=1 -> specificity =  11 */
UL OL LI.red  {}  /* a=0 b=1 c=3 -> specificity =  13 */
LI.red.level  {}  /* a=0 b=2 c=1 -> specificity =  21 */
#x34y         {}  /* a=1 b=0 c=0 -> specificity = 100 */

Cascading

Style sheets can be set on the QApplication , on parent widgets, and on child widgets. An arbitrary widget’s effective style sheet is obtained by merging the style sheets set on the widget’s ancestors (parent, grandparent, etc.), as well as any style sheet set on the QApplication .

When conflicts arise, the widget’s own style sheet is always preferred to any inherited style sheet, irrespective of the specificity of the conflicting rules. Likewise, the parent widget’s style sheet is preferred to the grandparent’s, etc.

One consequence of this is that setting a style rule on a widget automatically gives it precedence over other rules specified in the ancestor widgets’ style sheets or the QApplication style sheet. Consider the following example. First, we set a style sheet on the QApplication :

qApp.setStyleSheet("QPushButton { color: white }")

Then we set a style sheet on a QPushButton object:

myPushButton.setStyleSheet("* { color: blue }")

The style sheet on the QPushButton forces the QPushButton (and any child widget) to have blue text, in spite of the more specific rule set provided by the application-wide style sheet.

The result would have been the same if we had written

myPushButton.setStyleSheet("color: blue")

except that if the QPushButton had children (which is unlikely), the style sheet would have no impact on them.

Style sheet cascading is a complex topic. Refer to the CSS2 Specification for the gory details. Be aware that Qt currently doesn’t implement !important.

Inheritance

In classic CSS, when font and color of an item is not explicitly set, it gets automatically inherited from the parent. By default, when using Qt Style Sheets, a widget does not automatically inherit its font and color setting from its parent widget.

For example, consider a QPushButton inside a QGroupBox :

qApp.setStyleSheet("QGroupBox { color: red; } ")

The QPushButton does not have an explicit color set. Hence, instead of inheriting color of its parent QGroupBox , it has the system color. If we want to set the color on a QGroupBox and its children, we can write:

qApp.setStyleSheet("QGroupBox, QGroupBox * { color: red; }")

In contrast, setting a font and palette using setFont() and setPalette() propagates to child widgets.

If you would prefer that the font and palette propagate to child widgets, you can set the AA_UseStyleSheetPropagationInWidgetStyles flag, like this:

Usage:

QCoreApplication.setAttribute(Qt.AA_UseStyleSheetPropagationInWidgetStyles, True)

When the widget-style font and palette propagation is enabled, font and palette changes made through Qt Style Sheets will behave as though the user had manually called the corresponding setPalette() and setFont() methods on all of the QWidgets targeted by the style sheet. If this would have caused propagation in C++, it will cause propagation in style sheets and vice versa.

Widgets Inside C++ Namespaces

The Type Selector can be used to style widgets of a particular type. For example,

class MyPushButton(QPushButton):
    # ...

# ...
qApp.setStyleSheet("MyPushButton { background: yellow; }")

Qt Style Sheet uses QObject::className() of the widget to determine when to apply the Type Selector. When custom widgets are inside namespaces, the QObject::className() returns <namespace>::<classname>. This conflicts with the syntax for Sub-Controls . To overcome this problem, when using the Type Selector for widgets inside namespaces, we must replace the “::” with “–”. For example,

ns = {
    class MyPushButton(QPushButton):
        # ...


# ...
qApp.setStyleSheet("ns--MyPushButton { background: yellow; }")

Setting QObject Properties

From 4.3 and above, any designable Q_PROPERTY can be set using the qproperty-<property name> syntax.

For example,

MyLabel { qproperty-pixmap: url(pixmap.png); }
MyGroupBox { qproperty-titleColor: rgb(100, 200, 100); }
QPushButton { qproperty-iconSize: 20px 20px; }

If the property references an enum declared with , you should reference its constants by name, i.e., not their numeric value.

Note

Use the qproperty syntax with care, as it modifies the widget that is being painted. Also, the qproperty syntax is evaluated only once, which is when the widget is polished by the style. This means that any attempt to use them in pseudo-states such as QPushButton :hover, will not work.