These properties hold the padding around the text.

This QML property was introduced in Qt Quick Ultralite 1.1.

Sets the horizontal and vertical alignment of the text within the Text items width and height. By default, the text is vertically aligned to the top and horizontally aligned to the left.

The valid values for horizontalAlignment are Text.AlignLeft, Text.AlignRight, and Text.AlignHCenter. The valid values for verticalAlignment are Text.AlignTop, Text.AlignBottom, and Text.AlignVCenter.

Note that for a single line of text, the size of the text is the area of the text. In this common case, all alignments are equivalent. If you want the text to be, say, centered in its parent, then you will need to either modify the Item::anchors, or set horizontalAlignment to Text.AlignHCenter and bind the width to that of the parent.

Specifies the position of the item's baseline in local coordinates.

The baseline is the imaginary line on which the text sits.

The text color.

An example of green text defined using hexadecimal notation:

Text {
    color: "#00FF00"
    text: "green text"
}

An example of steel blue text defined using an SVG color name:

Text {
    color: "steelblue"
    text: "blue text"
}

Set this property to elide parts of the text to fit the Text item's size.

Use one of the following values to elide text:

Text items must have their width defined explicitly for eliding text. If a text item contains multi-line text, it must have both width and height defined explicitly. Multi-line text supports Text.ElideRight only.

The elide mark follows the text's direction. For example:

• - Left-to-right (LTR) text direction.
• - The same text in Arabic has Right-to-left (RTL) text direction.

When elide mode is Text.ElideRight, the ellipsis glyph appear on the right side for LTR text and left side for RTL text.

This property was introduced in Qt Quick Ultralite 2.1.

The font used for displaying the text.

This property holds the rotation of the item in degrees clockwise around its transformOrigin.

The default value is 0 degrees (that is, no rotation).

Rectangle {
    color: "blue"
    width: 100; height: 100
    Text {
        text: "Rotated Text"
        color: "red"
        x: 25; y: 25
        rotation: 30
    }
}

This property was introduced in Qt Quick Ultralite 1.3.

See also Transform and Rotation.

This property holds the scale factor for this item.

A scale of less than 1.0 renders the item smaller, whereas a scale greater than 1.0 renders the item larger. A negative scale causes the item to be mirrored when rendered.

The default value is 1.0.

Scaling is applied from the transformOrigin.

import QtQuick 2.15

Rectangle {
    color: "blue"
    width: 100; height: 100

    Rectangle {
        color: "green"
        width: 25; height: 25
    }

    Text {
        text: "Scaled Text"
        color: "red"
        x: 25; y: 25
        scale: 1.4
        transformOrigin: Item.TopLeft
    }
}

This property was introduced in Qt Quick Ultralite 1.3.

See also Transform and Scale.

The text to display. Text supports both plain and rich text strings.

See also textFormat.

The way the text property should be displayed.

Supported text formats are:

In Qt Quick Ultralite, both StyledText and RichText map to the same backend.

Supported HTML tags

<img src="" align="bottom,middle,top"> - inline images in Text item
<img src="" align="bottom,middle,top" width="50" height="40"> - inline images in StaticText item

img tag

Usage example:

Text {
    textFormat: Text.StyledText
    text: "Qt <img src=\"qt-logo.png\" align=\"middle\">"
}

As per HTML 4 specification

The baseline is an imaginary line upon which characters rest. Note that bottom and middle align options are relative to the baseline, while top is relative to the actual line height.

The StaticText items currently require the developer to provide the image size. The size must be an actual size of the usage image. Error is printed at run-time if mismatch is detected and the rendered text may not appear as intended.

StaticText {
    text: "flag <img src=\"latvia-flag-small-icon.png\" width=\"38\" height=\"20\">"
    textFormat:  Text.RichText
}

See also Managing Resources.

The textFormat default value Qt Quick compatibility

The textFormat property in Qt Quick Text item by default uses Text.AutoText. This format value is not implemented in Qt Quick Ultralite to avoid run-time overhead. There is only one rare case where text would render differently in Qt Quick, but this can simply be solved at the application level. Consider the following examples.

To render styled text, you must explicitly set StyledText/RichText. The following code is expected to work the same in Qt Quick Ultralite and Qt Quick.

Text {
    textFormat: Text.StyledText
    text: "Qt <img src=\"qt-logo.png\">"
}

To render text containing HTML tags as plain text in Qt Quick Ultralite, you would rely on the default value which is PlainText. Normally one should avoid explictly setting qml properties when default behaviour is desired. This enables emitting more memory optimized code.

Text {
    text: "Qt <img src=\"qt-logo.png\">"
}

Note that in the above example the textFormat property is not explicily set and therefore Qt Quick will rely on the Text.AutoText behaviour. In this rare case you will have to explicitly set the textFormat property to have the desired behaviour in both implementations.

Text {
    textFormat: Text.PlainText
    text: "Qt <img src=\"qt-logo.png\">"
}

This property was introduced in Qt Quick Ultralite 2.6.

This property holds the list of transformations to apply.

For more information see Transform.

This property holds the origin point around which scale and rotation transform.

Nine transform origins are available, as shown in the image below. The default transform origin is Item.Center.

This example rotates a text around its bottom-right corner.

Text {
    text: "Hello"
    transformOrigin: Item.BottomRight
    rotation: 45
}

To set an arbitrary transform origin point use the Scale or Rotation transform types with transform.

This property was introduced in Qt Quick Ultralite 1.3.

Returns true if the text has been truncated due to elide.

See also elide.

Set this property to wrap the text to the Text item's width. The text will only wrap if an explicit width has been set. Use one of the following modes to wrap text:

This property was introduced in Qt Quick Ultralite 2.2.