Member Function Documentation

QGeoRectangle::QGeoRectangle()

Constructs a new, invalid geo rectangle.

QGeoRectangle::QGeoRectangle(const QGeoCoordinate &center, double degreesWidth, double degreesHeight)

Constructs a new geo rectangle centered at center with a width in degrees of degreesWidth and a height in degrees of degreesHeight.

If degreesHeight would take the geo rectangle beyond one of the poles, the height of the geo rectangle will be truncated such that the geo rectangle only extends up to the pole. The center of the geo rectangle will be unchanged, and the height will be adjusted such that the center point is at the center of the truncated geo rectangle.

QGeoRectangle::QGeoRectangle(const QGeoCoordinate &topLeft, const QGeoCoordinate &bottomRight)

Constructs a new geo rectangle with a top left coordinate topLeft and a bottom right coordinate bottomRight.

QGeoRectangle::QGeoRectangle(const QList<QGeoCoordinate> &coordinates)

Constructs a new geo rectangle, of minimum size, containing all of the coordinates.

QGeoRectangle::QGeoRectangle(const QGeoRectangle &other)

Constructs a geo rectangle from the contents of other.

QGeoRectangle::QGeoRectangle(const QGeoShape &other)

Constructs a geo rectangle from the contents of other.

QGeoRectangle::~QGeoRectangle()

Destroys this geo rectangle.

QGeoCoordinate QGeoRectangle::bottomLeft() const

Returns the bottom left coordinate of this geo rectangle.

Note: Getter function for property bottomLeft.

See also setBottomLeft().

QGeoCoordinate QGeoRectangle::bottomRight() const

Returns the bottom right coordinate of this geo rectangle.

Note: Getter function for property bottomRight.

See also setBottomRight().

QGeoCoordinate QGeoRectangle::center() const

Returns the center of this geo rectangle. Equivalent to QGeoShape::center().

Note: Getter function for property center.

See also setCenter().

bool QGeoRectangle::contains(const QGeoRectangle &rectangle) const

Returns whether the geo rectangle rectangle is contained within this geo rectangle.

void QGeoRectangle::extendRectangle(const QGeoCoordinate &coordinate)

Extends the geo rectangle to also cover the coordinate coordinate

This function was introduced in Qt 5.9.

Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.

double QGeoRectangle::height() const

Returns the height of this geo rectangle in degrees.

The return value is undefined if this geo rectangle is invalid.

Note: Getter function for property height.

See also setHeight().

bool QGeoRectangle::intersects(const QGeoRectangle &rectangle) const

Returns whether the geo rectangle rectangle intersects this geo rectangle.

If the top or bottom edges of both geo rectangles are at one of the poles the geo rectangles are considered to be intersecting, since the longitude is irrelevant when the edges are at the pole.

Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.

void QGeoRectangle::setBottomLeft(const QGeoCoordinate &bottomLeft)

Sets the bottom left coordinate of this geo rectangle to bottomLeft.

Note: Setter function for property bottomLeft.

See also bottomLeft().

void QGeoRectangle::setBottomRight(const QGeoCoordinate &bottomRight)

Sets the bottom right coordinate of this geo rectangle to bottomRight.

Note: Setter function for property bottomRight.

See also bottomRight().

void QGeoRectangle::setCenter(const QGeoCoordinate &center)

Sets the center of this geo rectangle to center.

If this causes the geo rectangle to cross on of the poles the height of the geo rectangle will be truncated such that the geo rectangle only extends up to the pole. The center of the geo rectangle will be unchanged, and the height will be adjusted such that the center point is at the center of the truncated geo rectangle.

Note: Setter function for property center.

See also center().

void QGeoRectangle::setHeight(double degreesHeight)

Sets the height of this geo rectangle in degrees to degreesHeight.

Note: Setter function for property height.

See also height().

void QGeoRectangle::setTopLeft(const QGeoCoordinate &topLeft)

Sets the top left coordinate of this geo rectangle to topLeft.

Note: Setter function for property topLeft.

See also topLeft().

void QGeoRectangle::setTopRight(const QGeoCoordinate &topRight)

Sets the top right coordinate of this geo rectangle to topRight.

Note: Setter function for property topRight.

See also topRight().

void QGeoRectangle::setWidth(double degreesWidth)

Sets the width of this geo rectangle in degrees to degreesWidth.

Note: Setter function for property width.

See also width().

QString QGeoRectangle::toString() const

Returns the geo rectangle properties as a string.

This function was introduced in Qt 5.5.

Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.

QGeoCoordinate QGeoRectangle::topLeft() const

Returns the top left coordinate of this geo rectangle.

Note: Getter function for property topLeft.

See also setTopLeft().

QGeoCoordinate QGeoRectangle::topRight() const

Returns the top right coordinate of this geo rectangle.

Note: Getter function for property topRight.

See also setTopRight().

void QGeoRectangle::translate(double degreesLatitude, double degreesLongitude)

Translates this geo rectangle by degreesLatitude northwards and degreesLongitude eastwards.

Negative values of degreesLatitude and degreesLongitude correspond to southward and westward translation respectively.

If the translation would have caused the geo rectangle to cross a pole the geo rectangle will be translated until the top or bottom edge of the geo rectangle touches the pole but not further.

Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.

QGeoRectangle QGeoRectangle::translated(double degreesLatitude, double degreesLongitude) const

Returns a copy of this geo rectangle translated by degreesLatitude northwards and degreesLongitude eastwards.

Negative values of degreesLatitude and degreesLongitude correspond to southward and westward translation respectively.

Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.

See also translate().

QGeoRectangle QGeoRectangle::united(const QGeoRectangle &rectangle) const

Returns the smallest geo rectangle which contains both this geo rectangle and rectangle.

If the centers of the two geo rectangles are separated by exactly 180.0 degrees then the width is set to 360.0 degrees with the leftmost longitude set to -180.0 degrees and the rightmost longitude set to 180.0 degrees. This is done to ensure that the result is independent of the order of the operands.

Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.

double QGeoRectangle::width() const

Returns the width of this geo rectangle in degrees.

The return value is undefined if this geo rectangle is invalid.

Note: Getter function for property width.

See also setWidth().

bool QGeoRectangle::operator!=(const QGeoRectangle &other) const

Returns whether this geo rectangle is not equal to other.

QGeoRectangle &QGeoRectangle::operator=(const QGeoRectangle &other)

Assigns other to this geo rectangle and returns a reference to this geo rectangle.

bool QGeoRectangle::operator==(const QGeoRectangle &other) const

Returns whether this geo rectangle is equal to other.

QGeoRectangle QGeoRectangle::operator|(const QGeoRectangle &rectangle) const

Returns the smallest geo rectangle which contains both this geo rectangle and rectangle.

If the centers of the two geo rectangles are separated by exactly 180.0 degrees then the width is set to 360.0 degrees with the leftmost longitude set to -180.0 degrees and the rightmost longitude set to 180.0 degrees. This is done to ensure that the result is independent of the order of the operands.

QGeoRectangle &QGeoRectangle::operator|=(const QGeoRectangle &rectangle)

Returns the smallest geo rectangle which contains both this geo rectangle and rectangle.

If the centers of the two geo rectangles are separated by exactly 180.0 degrees then the width is set to 360.0 degrees with the leftmost longitude set to -180.0 degrees and the rightmost longitude set to 180.0 degrees. This is done to ensure that the result is independent of the order of the operands.