# QLineF Class

The QLineF class provides a two-dimensional vector using floating point precision. More...

Header: | #include <QLineF> |

qmake: | QT += core |

## Public Types

enum | IntersectType { NoIntersection, UnboundedIntersection, BoundedIntersection } |

## Public Functions

QLineF() | |

QLineF(const QPointF &p1, const QPointF &p2) | |

QLineF(qreal x1, qreal y1, qreal x2, qreal y2) | |

QLineF(const QLine &line) | |

QPointF | p1() const |

QPointF | p2() const |

qreal | x1() const |

qreal | x2() const |

qreal | y1() const |

qreal | y2() const |

qreal | angle() const |

qreal | angleTo(const QLineF &line) const |

QPointF | center() const |

qreal | dx() const |

qreal | dy() const |

IntersectType | intersect(const QLineF &line, QPointF *intersectionPoint) const |

bool | isNull() const |

qreal | length() const |

QLineF | normalVector() const |

QPointF | pointAt(qreal t) const |

void | setP1(const QPointF &p1) |

void | setP2(const QPointF &p2) |

void | setAngle(qreal angle) |

void | setLength(qreal length) |

void | setLine(qreal x1, qreal y1, qreal x2, qreal y2) |

void | setPoints(const QPointF &p1, const QPointF &p2) |

QLine | toLine() const |

void | translate(const QPointF &offset) |

void | translate(qreal dx, qreal dy) |

QLineF | translated(const QPointF &offset) const |

QLineF | translated(qreal dx, qreal dy) const |

QLineF | unitVector() const |

bool | operator!=(const QLineF &line) const |

bool | operator==(const QLineF &line) const |

## Static Public Members

QLineF | fromPolar(qreal length, qreal angle) |

## Related Non-Members

QDataStream & | operator<<(QDataStream &stream, const QLineF &line) |

QDataStream & | operator>>(QDataStream &stream, QLineF &line) |

## Detailed Description

The QLineF class provides a two-dimensional vector using floating point precision.

A QLineF describes a finite length line (or line segment) on a two-dimensional surface. QLineF defines the start and end points of the line using floating point accuracy for coordinates. Use the toLine() function to retrieve an integer based copy of this line.

The positions of the line's start and end points can be retrieved using the p1(), x1(), y1(), p2(), x2(), and y2() functions. The dx() and dy() functions return the horizontal and vertical components of the line, respectively.

The line's length can be retrieved using the length() function, and altered using the setLength() function. Similarly, angle() and setAngle() are respectively used for retrieving and altering the angle of the line. Use the isNull() function to determine whether the QLineF represents a valid line or a null line.

The intersect() function determines the IntersectType for this line and a given line, while the angleTo() function returns the angle between the lines. In addition, the unitVector() function returns a line that has the same starting point as this line, but with a length of only 1, while the normalVector() function returns a line that is perpendicular to this line with the same starting point and length.

Finally, the line can be translated a given offset using the translate() function, and can be traversed using the pointAt() function.

### Constraints

QLine is limited to the minimum and maximum values for the `int`

type. Operations on a QLine that could potentially result in values outside this range will result in undefined behavior.

**See also **QLine, QPolygonF, and QRectF.

## Member Type Documentation

### enum QLineF::IntersectType

Describes the intersection between two lines.

QLineF::UnboundedIntersection | QLineF::BoundedIntersection |

Constant | Value | Description |
---|---|---|

`QLineF::NoIntersection` | `0` | Indicates that the lines do not intersect; i.e. they are parallel. |

`QLineF::UnboundedIntersection` | `2` | The two lines intersect, but not within the range defined by their lengths. This will be the case if the lines are not parallel. |

intersect() will also return this value if the intersect point is within the start and end point of only one of the lines.

Constant | Value | Description |
---|---|---|

`QLineF::BoundedIntersection` | `1` | The two lines intersect with each other within the start and end points of each line. |

**See also **intersect().

## Member Function Documentation

### QLineF::QLineF()

Constructs a null line.

### QLineF::QLineF(const QPointF &*p1*, const QPointF &*p2*)

Constructs a line object that represents the line between *p1* and *p2*.

### QLineF::QLineF(qreal *x1*, qreal *y1*, qreal *x2*, qreal *y2*)

Constructs a line object that represents the line between (*x1*, *y1*) and (*x2*, *y2*).

### QLineF::QLineF(const QLine &*line*)

Construct a QLineF object from the given integer-based *line*.

**See also **toLine().

### QPointF QLineF::p1() const

Returns the line's start point.

**See also **setP1(), x1(), y1(), and p2().

### QPointF QLineF::p2() const

Returns the line's end point.

**See also **setP2(), x2(), y2(), and p1().

### qreal QLineF::x1() const

Returns the x-coordinate of the line's start point.

**See also **p1().

### qreal QLineF::x2() const

Returns the x-coordinate of the line's end point.

**See also **p2().

### qreal QLineF::y1() const

Returns the y-coordinate of the line's start point.

**See also **p1().

### qreal QLineF::y2() const

Returns the y-coordinate of the line's end point.

**See also **p2().

### qreal QLineF::angle() const

Returns the angle of the line in degrees.

The return value will be in the range of values from 0.0 up to but not including 360.0. The angles are measured counter-clockwise from a point on the x-axis to the right of the origin (x > 0).

This function was introduced in Qt 4.4.

**See also **setAngle().

### qreal QLineF::angleTo(const QLineF &*line*) const

Returns the angle (in degrees) from this line to the given *line*, taking the direction of the lines into account. If the lines do not intersect within their range, it is the intersection point of the extended lines that serves as origin (see QLineF::UnboundedIntersection).

The returned value represents the number of degrees you need to add to this line to make it have the same angle as the given *line*, going counter-clockwise.

This function was introduced in Qt 4.4.

**See also **intersect().

### QPointF QLineF::center() const

Returns the center point of this line. This is equivalent to 0.5 * p1() + 0.5 * p2().

This function was introduced in Qt 5.8.

### qreal QLineF::dx() const

Returns the horizontal component of the line's vector.

### qreal QLineF::dy() const

Returns the vertical component of the line's vector.

`[static] `

QLineF QLineF::fromPolar(qreal *length*, qreal *angle*)

Returns a QLineF with the given *length* and *angle*.

The first point of the line will be on the origin.

Positive values for the angles mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o'clock position.

This function was introduced in Qt 4.4.

### IntersectType QLineF::intersect(const QLineF &*line*, QPointF **intersectionPoint*) const

Returns a value indicating whether or not *this* line intersects with the given *line*.

The actual intersection point is extracted to *intersectionPoint* (if the pointer is valid). If the lines are parallel, the intersection point is undefined.

### bool QLineF::isNull() const

Returns `true`

if the line is not set up with valid start and end point; otherwise returns `false`

.

### qreal QLineF::length() const

Returns the length of the line.

**See also **setLength().

### QLineF QLineF::normalVector() const

Returns a line that is perpendicular to this line with the same starting point and length.

**See also **unitVector().

### QPointF QLineF::pointAt(qreal *t*) const

Returns the point at the parameterized position specified by *t*. The function returns the line's start point if t = 0, and its end point if t = 1.

### void QLineF::setP1(const QPointF &*p1*)

Sets the starting point of this line to *p1*.

This function was introduced in Qt 4.4.

### void QLineF::setP2(const QPointF &*p2*)

Sets the end point of this line to *p2*.

This function was introduced in Qt 4.4.

### void QLineF::setAngle(qreal *angle*)

Sets the angle of the line to the given *angle* (in degrees). This will change the position of the second point of the line such that the line has the given angle.

Positive values for the angles mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o'clock position.

This function was introduced in Qt 4.4.

**See also **angle().

### void QLineF::setLength(qreal *length*)

Sets the length of the line to the given *length*. QLineF will move the end point - p2() - of the line to give the line its new length.

If the line is a null line, the length will remain zero regardless of the length specified.

**See also **length() and isNull().

### void QLineF::setLine(qreal *x1*, qreal *y1*, qreal *x2*, qreal *y2*)

Sets this line to the start in *x1*, *y1* and end in *x2*, *y2*.

This function was introduced in Qt 4.4.

**See also **setP1(), setP2(), p1(), and p2().

### void QLineF::setPoints(const QPointF &*p1*, const QPointF &*p2*)

Sets the start point of this line to *p1* and the end point of this line to *p2*.

This function was introduced in Qt 4.4.

**See also **setP1(), setP2(), p1(), and p2().

### QLine QLineF::toLine() const

Returns an integer based copy of this line.

Note that the returned line's start and end points are rounded to the nearest integer.

**See also **QLineF().

### void QLineF::translate(const QPointF &*offset*)

Translates this line by the given *offset*.

### void QLineF::translate(qreal *dx*, qreal *dy*)

This is an overloaded function.

Translates this line the distance specified by *dx* and *dy*.

### QLineF QLineF::translated(const QPointF &*offset*) const

Returns this line translated by the given *offset*.

This function was introduced in Qt 4.4.

### QLineF QLineF::translated(qreal *dx*, qreal *dy*) const

This is an overloaded function.

Returns this line translated the distance specified by *dx* and *dy*.

This function was introduced in Qt 4.4.

### QLineF QLineF::unitVector() const

Returns the unit vector for this line, i.e a line starting at the same point as *this* line with a length of 1.0.

**See also **normalVector().

### bool QLineF::operator!=(const QLineF &*line*) const

Returns `true`

if the given *line* is not the same as *this* line.

A line is different from another line if their start or end points differ, or the internal order of the points is different.

### bool QLineF::operator==(const QLineF &*line*) const

Returns `true`

if the given *line* is the same as this line.

A line is identical to another line if the start and end points are identical, and the internal order of the points is the same.

## Related Non-Members

### QDataStream &operator<<(QDataStream &*stream*, const QLineF &*line*)

Writes the given *line* to the given *stream* and returns a reference to the stream.

**See also **Serializing Qt Data Types.

### QDataStream &operator>>(QDataStream &*stream*, QLineF &*line*)

Reads a line from the given *stream* into the given *line* and returns a reference to the stream.

**See also **Serializing Qt Data Types.

© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.