Qt Namespace

Type Documentation

enum Qt::AlignmentFlag
flags Qt::Alignment

This enum type is used to describe alignment. It contains horizontal and vertical flags that can be combined to produce the required effect.

The TextElideMode enum can also be used in many situations to fine-tune the appearance of aligned text.

The horizontal flags are:

The vertical flags are:

You can use only one of the horizontal flags at a time. There is one two-dimensional flag:

You can use at most one horizontal and one vertical flag at a time. Qt::AlignCenter counts as both horizontal and vertical.

Three enum values are useful in applications that can be run in right-to-left mode:

Masks:

Conflicting combinations of flags have undefined meanings.

The Alignment type is a typedef for QFlags<AlignmentFlag>. It stores an OR combination of AlignmentFlag values.

enum Qt::AnchorPoint

Specifies a side of a layout item that can be anchored. This is used by QGraphicsAnchorLayout.

See also QGraphicsAnchorLayout.

enum Qt::ApplicationAttribute

This enum describes attributes that change the behavior of application-wide features. These are enabled and disabled using QCoreApplication::setAttribute(), and can be tested for with QCoreApplication::testAttribute().

When this attribute is true Qt will not do the remapping, and pressing the Command modifier will result in Qt::MetaModifier, while pressing the Control modifier will result in Qt::ControlModifier.

Note that the QKeySequence::StandardKey sequences will always be based on the same modifier (i.e., QKeySequence::Copy will be Command+C regardless of the value set), but what is output for QKeySequence::toString() will be different.

enum Qt::ApplicationState
flags Qt::ApplicationStates

This enum type is used to specify the current state of the application.

The states are

The ApplicationStates type is a typedef for QFlags<ApplicationState>. It stores an OR combination of ApplicationState values.

enum Qt::ArrowType

enum Qt::AspectRatioMode

This enum type defines what happens to the aspect ratio when scaling an rectangle.

See also QSize::scale() and QImage::scaled().

enum Qt::Axis

This enum type defines three values to represent the three axes in the cartesian coordinate system.

See also QTransform::rotate() and QTransform::rotateRadians().

enum Qt::BGMode

Background mode:

enum Qt::BrushStyle

This enum type defines the brush styles supported by Qt, i.e. the fill pattern of shapes drawn using QPainter.

See also QBrush.

enum Qt::CaseSensitivity

enum Qt::CheckState

This enum describes the state of checkable items, controls, and widgets.

See also QCheckBox, Qt::ItemFlags, and Qt::ItemDataRole.

enum Qt::ChecksumType

This enum describes the possible standards used by qChecksum().

enum Qt::ClipOperation

enum class Qt::ColorScheme

Represents the appearance of an application's theme, defined by QGuiApplication::palette().

enum Qt::ConnectionType

This enum describes the types of connection that can be used between signals and slots. In particular, it determines whether a particular signal is delivered to a slot immediately or queued for delivery at a later time.

With queued connections, the parameters must be of types that are known to Qt's meta-object system, because Qt needs to copy the arguments to store them in an event behind the scenes. If you try to use a queued connection and get the error message:

QObject::connect: Cannot queue arguments of type 'MyType'

Call qRegisterMetaType() to register the data type before you establish the connection.

When using signals and slots with multiple threads, see Signals and Slots Across Threads.

See also Thread Support in Qt, QObject::connect(), qRegisterMetaType(), and Q_DECLARE_METATYPE().

enum Qt::ContextMenuPolicy

This enum type defines the various policies a widget can have with respect to showing a context menu.

enum Qt::CoordinateSystem

This enum specifies the coordinate system.

enum Qt::Corner

This enum type specifies a corner in a rectangle:

enum Qt::CursorMoveStyle

This enum describes the movement style available to text cursors. The options are:

enum Qt::CursorShape

This enum type defines the various cursors that can be used.

The standard arrow cursor is the default for widgets in a normal state.

Constant	Value	Description
Qt::ArrowCursor	0	The standard arrow cursor.
Qt::UpArrowCursor	1	An arrow pointing upwards toward the top of the screen.
Qt::CrossCursor	2	A crosshair cursor, typically used to help the user accurately select a point on the screen.
Qt::WaitCursor	3	An hourglass or watch cursor, usually shown during operations that prevent the user from interacting with the application.
Qt::IBeamCursor	4	A caret or ibeam cursor, indicating that a widget can accept and display text input.
Qt::SizeVerCursor	5	A cursor used for elements that are used to vertically resize top-level windows.
Qt::SizeHorCursor	6	A cursor used for elements that are used to horizontally resize top-level windows.
Qt::SizeBDiagCursor	7	A cursor used for elements that are used to diagonally resize top-level windows at their top-right and bottom-left corners.
Qt::SizeFDiagCursor	8	A cursor used for elements that are used to diagonally resize top-level windows at their top-left and bottom-right corners.
Qt::SizeAllCursor	9	A cursor used for elements that are used to resize top-level windows in any direction.
Qt::BlankCursor	10	A blank/invisible cursor, typically used when the cursor shape needs to be hidden.
Qt::SplitVCursor	11	A cursor used for vertical splitters, indicating that a handle can be dragged horizontally to adjust the use of available space.
Qt::SplitHCursor	12	A cursor used for horizontal splitters, indicating that a handle can be dragged vertically to adjust the use of available space.
Qt::PointingHandCursor	13	A pointing hand cursor that is typically used for clickable elements such as hyperlinks.
Qt::ForbiddenCursor	14	A slashed circle cursor, typically used during drag and drop operations to indicate that dragged content cannot be dropped on particular widgets or inside certain regions.
Qt::OpenHandCursor	17	A cursor representing an open hand, typically used to indicate that the area under the cursor is the visible part of a canvas that the user can click and drag in order to scroll around.
Qt::ClosedHandCursor	18	A cursor representing a closed hand, typically used to indicate that a dragging operation is in progress that involves scrolling.
Qt::WhatsThisCursor	15	An arrow with a question mark, typically used to indicate the presence of What's This? help for a widget.
Qt::BusyCursor	16	An hourglass or watch cursor, usually shown during operations that allow the user to interact with the application while they are performed in the background.
Qt::DragMoveCursor	20	A cursor that is usually used when dragging an item.
Qt::DragCopyCursor	19	A cursor that is usually used when dragging an item to copy it.
Qt::DragLinkCursor	21	A cursor that is usually used when dragging an item to make a link to it.
Qt::BitmapCursor	24

enum Qt::DateFormat

See also QDate::toString(), QTime::toString(), QDateTime::toString(), QDate::fromString(), QTime::fromString(), and QDateTime::fromString().

enum Qt::DayOfWeek

enum Qt::DockWidgetArea
flags Qt::DockWidgetAreas

Represents the areas a QDockWidget can be plugged to.

The DockWidgetAreas type is a typedef for QFlags<DockWidgetArea>. It stores an OR combination of DockWidgetArea values.

See also QDockWidget::setAllowedAreas and QDockWidget::isAreaAllowed.

enum Qt::DropAction
flags Qt::DropActions

The DropActions type is a typedef for QFlags<DropAction>. It stores an OR combination of DropAction values.

enum Qt::Edge
flags Qt::Edges

This enum type specifies an edge in a rectangle:

The Edges type is a typedef for QFlags<Edge>. It stores an OR combination of Edge values.

enum Qt::EnterKeyType

This can be used to alter the appearance of the Return key on an on-screen keyboard.

enum Qt::EventPriority

This enum can be used to specify event priorities.

Note that these values are provided purely for convenience, since event priorities can be any value between INT_MAX and INT_MIN, inclusive. For example, you can define custom priorities as being relative to each other:

enum CustomEventPriority
{
    // An important event
    ImportantEventPriority = Qt::HighEventPriority,

    // A more important event
    MoreImportantEventPriority = ImportantEventPriority + 1,

    // A critical event
    CriticalEventPriority = 100 * MoreImportantEventPriority,

    // Not that important
    StatusEventPriority = Qt::LowEventPriority,

    // These are less important than Status events
    IdleProcessingDoneEventPriority = StatusEventPriority - 1
};

See also QCoreApplication::postEvent().

enum Qt::FillRule

Specifies which method should be used to fill the paths and polygons.

enum Qt::FindChildOption
flags Qt::FindChildOptions

The FindChildOptions type is a typedef for QFlags<FindChildOption>. It stores an OR combination of FindChildOption values.

enum Qt::FocusPolicy

This enum type defines the various policies a widget can have with respect to acquiring keyboard focus.

enum Qt::FocusReason

This enum specifies why the focus changed. It will be passed through QWidget::setFocus and can be retrieved in the QFocusEvent sent to the widget upon focus change.

See also Keyboard Focus in Widgets.

enum Qt::GestureFlag
flags Qt::GestureFlags

This enum type describes additional flags that can be used when subscribing to a gesture.

The GestureFlags type is a typedef for QFlags<GestureFlag>. It stores an OR combination of GestureFlag values.

See also QWidget::grabGesture() and QGraphicsObject::grabGesture().

enum Qt::GestureState

This enum type describes the state of a gesture.

See also QGesture.

enum Qt::GestureType

This enum type describes the standard gestures.

User-defined gestures are registered with the QGestureRecognizer::registerRecognizer() function which generates a custom gesture ID with the Qt::CustomGesture flag set.

See also QGesture, QWidget::grabGesture(), and QGraphicsObject::grabGesture().

enum Qt::GlobalColor

Qt's predefined QColor objects:

See also QColor.

Qt::HANDLE

A handle type for system objects, defined as void * on all platforms.

enum class Qt::HighDpiScaleFactorRoundingPolicy

This enum describes the possible High-DPI scale factor rounding policies, which decide how non-integer scale factors (such as Windows 150%) are handled.

The active policy is set by calling QGuiApplication::setHighDdpiScaleFactorRoundingPolicy() before the application object is created.

See also QGuiApplication::setHighDpiScaleFactorRoundingPolicy().

enum Qt::HitTestAccuracy

This enum contains the types of accuracy that can be used by the QTextDocument class when testing for mouse clicks on text documents.

enum Qt::ImageConversionFlag
flags Qt::ImageConversionFlags

The options marked "(default)" are set if no other values from the list are included (since the defaults are zero):

Color/Mono preference (ignored for QBitmap):

Dithering mode preference:

Dithering mode preference for 1-bit alpha masks:

Color matching versus dithering preference:

The ImageConversionFlags type is a typedef for QFlags<ImageConversionFlag>. It stores an OR combination of ImageConversionFlag values.

enum Qt::InputMethodHint
flags Qt::InputMethodHints

Flags that alter the behavior:

Flags that restrict input (exclusive flags):

Masks:

The InputMethodHints type is a typedef for QFlags<InputMethodHint>. It stores an OR combination of InputMethodHint values.

See also QGraphicsItem::inputMethodHints().

enum Qt::InputMethodQuery
flags Qt::InputMethodQueries

Masks:

The InputMethodQueries type is a typedef for QFlags<InputMethodQuery>. It stores an OR combination of InputMethodQuery values.

See also QInputMethodQueryEvent.

enum Qt::ItemDataRole

Each item in the model has a set of data elements associated with it, each with its own role. The roles are used by the view to indicate to the model which type of data it needs. Custom models should return data in these types.

The general purpose roles (and the associated types) are:

Roles describing appearance and meta data (with associated types):

Accessibility roles (with associated types):

User roles:

For user roles, it is up to the developer to decide which types to use and ensure that components use the correct types when accessing and setting data.

enum Qt::ItemFlag
flags Qt::ItemFlags

This enum describes the properties of an item:

Note that checkable items need to be given both a suitable set of flags and an initial state, indicating whether the item is checked or not. This is handled automatically for model/view components, but needs to be explicitly set for instances of QListWidgetItem, QTableWidgetItem, and QTreeWidgetItem.

Note that it is undefined behavior to reimplement QAbstractItemModel::hasChildren to return true for an index if that index has the Qt::ItemNeverHasChildren flag set.

The ItemFlags type is a typedef for QFlags<ItemFlag>. It stores an OR combination of ItemFlag values.

See also QAbstractItemModel.

enum Qt::ItemSelectionMode

This enum is used in QGraphicsItem, QGraphicsScene and QGraphicsView to specify how items are selected, or how to determine if shapes and items collide.

See also QGraphicsScene::items(), QGraphicsScene::collidingItems(), QGraphicsView::items(), QGraphicsItem::collidesWithItem(), and QGraphicsItem::collidesWithPath().

enum Qt::ItemSelectionOperation

This enum is used in QGraphicsScene to specify what to do with currently selected items when setting a selection area.

See also QGraphicsScene::setSelectionArea().

enum Qt::Key

The key names used by Qt.

See also QKeyEvent::key().

enum Qt::KeyboardModifier
flags Qt::KeyboardModifiers

This enum describes the modifier keys.

The KeyboardModifiers type is a typedef for QFlags<KeyboardModifier>. It stores an OR combination of KeyboardModifier values.

See also MouseButton and Modifier.

enum Qt::LayoutDirection

Specifies the direction of Qt's layouts and text handling.

Right-to-left layouts are necessary for certain languages, notably Arabic and Hebrew.

LayoutDirectionAuto serves two purposes. When used in conjunction with widgets and layouts, it will imply to use the layout direction set on the parent widget or QApplication. This has the same effect as QWidget::unsetLayoutDirection().

When LayoutDirectionAuto is used in conjunction with text layouting, it will imply that the text directionality is determined from the content of the string to be layouted.

See also QGuiApplication::setLayoutDirection(), QWidget::setLayoutDirection(), QTextOption::setTextDirection(), and QString::isRightToLeft().

enum Qt::MaskMode

This enum specifies the behavior of the QPixmap::createMaskFromColor() and QImage::createMaskFromColor() functions.

enum Qt::MatchFlag
flags Qt::MatchFlags

This enum describes the type of matches that can be used when searching for items in a model.

The MatchFlags type is a typedef for QFlags<MatchFlag>. It stores an OR combination of MatchFlag values.

See also QString::compare() and QRegularExpression.

enum Qt::Modifier
flags Qt::Modifiers

This enum provides shorter names for the keyboard modifier keys supported by Qt.

The Modifiers type is a typedef for QFlags<Modifier>. It stores an OR combination of Modifier values.

See also KeyboardModifier and MouseButton.

enum Qt::MouseButton
flags Qt::MouseButtons

This enum type describes the different mouse buttons.

The MouseButtons type is a typedef for QFlags<MouseButton>. It stores an OR combination of MouseButton values.

See also KeyboardModifier and Modifier.

enum Qt::MouseEventFlag
flags Qt::MouseEventFlags

This enum provides additional information concerning a QMouseEvent.

The MouseEventFlags type is a typedef for QFlags<MouseEventFlag>. It stores an OR combination of MouseEventFlag values.

enum Qt::MouseEventSource

This enum describes the source of a mouse event and can be useful to determine if the event is an artificial mouse event originating from another device such as a touchscreen.

See also Qt::AA_SynthesizeMouseForUnhandledTouchEvents.

enum Qt::NativeGestureType

This enum returns the gesture type.

enum Qt::NavigationMode

This enum type describes the mode for moving focus.

See also QApplication::setNavigationMode() and QApplication::navigationMode().

enum Qt::Orientation
flags Qt::Orientations

This type is used to signify an object's orientation.

Orientation is used with QScrollBar for example.

The Orientations type is a typedef for QFlags<Orientation>. It stores an OR combination of Orientation values.

enum Qt::PenCapStyle

This enum type defines the pen cap styles supported by Qt, i.e. the line end caps that can be drawn using QPainter.

Qt::SquareCap	Qt::FlatCap	Qt::RoundCap

See also QPen.

enum Qt::PenJoinStyle

This enum type defines the pen join styles supported by Qt, i.e. which joins between two connected lines can be drawn using QPainter.

Qt::BevelJoin	Qt::MiterJoin	Qt::RoundJoin

See also QPen.

enum Qt::PenStyle

This enum type defines the pen styles that can be drawn using QPainter. The styles are:

Qt::SolidLine	Qt::DashLine	Qt::DotLine
Qt::DashDotLine	Qt::DashDotDotLine	Qt::CustomDashLine

See also QPen.

[since 6.5] enum class Qt::PermissionStatus

This enum describes the possible statuses of a permissions.

This enum was introduced in Qt 6.5.

See also QCoreApplication::requestPermission(), QCoreApplication::checkPermission(), and Application Permissions.

enum Qt::ReturnByValueConstant

This is a dummy type, designed to help users transition from certain deprecated APIs to their replacement APIs.

See also QCursor::bitmap(), QCursor::mask(), QLabel::picture(), and QLabel::pixmap().

enum Qt::ScreenOrientation
flags Qt::ScreenOrientations

This enum type specifies the various orientations a screen might have.

The ScreenOrientations type is a typedef for QFlags<ScreenOrientation>. It stores an OR combination of ScreenOrientation values.

enum Qt::ScrollBarPolicy

This enum type describes the various modes of QAbstractScrollArea's scroll bars.

(The modes for the horizontal and vertical scroll bars are independent.)

enum Qt::ScrollPhase

This enum describes the phase of scrolling.

enum Qt::ShortcutContext

For a QEvent::Shortcut event to occur, the shortcut's key sequence must be entered by the user in a context where the shortcut is active. The possible contexts are these:

enum Qt::SizeHint

This enum is used by QGraphicsLayoutItem::sizeHint()

See also QGraphicsLayoutItem::sizeHint().

enum Qt::SizeMode

This enum is used by QPainter::drawRoundedRect() and QPainterPath::addRoundedRect() functions to specify the radii of rectangle corners with respect to the dimensions of the bounding rectangles specified.

enum Qt::SortOrder

This enum describes how the items in a widget are sorted.

enum Qt::SplitBehaviorFlags
flags Qt::SplitBehavior

This enum specifies how the split() functions should behave with respect to empty strings.

The SplitBehavior type is a typedef for QFlags<SplitBehaviorFlags>. It stores an OR combination of SplitBehaviorFlags values.

See also QString::split().

enum Qt::TabFocusBehavior

This enum type provides different focus behaviors for tab navigation.

enum Qt::TextElideMode

This enum specifies where the ellipsis should appear when displaying texts that don't fit: