You are here
Search results
(1  20 of 29)
Pages
 Title
 Capturing bluetooth traffic in the wild : practical systems and privacy implications
 Creator
 Albazrqaoe, Wahhab
 Date
 2018
 Collection
 Electronic Theses & Dissertations
 Description

"Bluetooth wireless technology is today present in billions of smartphones, mobile devices, and portable electronics. With the prevalence of personal Bluetooth devices, a practical Bluetooth traffic sniffer is of increasing interest due to the following. First, it has been reported that a traffic sniffer is an essential, daytoday tool for Bluetooth engineers and applications developers [4] [14]; and second, as the communication between Bluetooth devices is privacysensitive in nature,...
Show more"Bluetooth wireless technology is today present in billions of smartphones, mobile devices, and portable electronics. With the prevalence of personal Bluetooth devices, a practical Bluetooth traffic sniffer is of increasing interest due to the following. First, it has been reported that a traffic sniffer is an essential, daytoday tool for Bluetooth engineers and applications developers [4] [14]; and second, as the communication between Bluetooth devices is privacysensitive in nature, exploring the possibility of Bluetooth traffic sniffing in practical settings sheds lights into potential user privacy leakage. To date, sniffing Bluetooth traffic has been widely considered an extremely intricate task due to wideband spread spectrum of Bluetooth, pseudorandom frequency hopping adopted by Bluetooth at baseband, and the interference in the open 2.4 GHz band. This thesis addresses these challenges by introducing novel traffic sniffers that capture Bluetooth packets in practical environments. In particular, we present the following systems. (i) BlueEar, the first practical Bluetooth traffic sniffing system only using general, inexpensive wireless platforms. BlueEar features a novel dualradio architecture where two inexpensive, Bluetoothcompliant radios coordinate with each other to eavesdrop on hopping subchannels in indiscoverable mode. Statistic models and lightweight machine learning tools are integrated to learn the adaptive hopping behavior of the target. Our results show that BlueEar maintains a packet capture rate higher than 90% consistently in dynamic settings. In addition, we discuss the implications of the BlueEar approach on Bluetooth LE sniffing and present a practical countermeasure that effectively reduces the packet capture rate of sniffer by 70%, which can be easily implemented on the Bluetooth master while requiring no modification to slave devices like keyboards and headsets. And (ii) BlueFunnel, the first lowpower, wideband traffic sniffer that monitors Bluetooth spectrum in parallel and captures packet in realtime. BlueFunnel tackles the challenge of wideband spread spectrum based on low speed, low cost ADC (2 Msamples/sec) to subsample Bluetooth spectrum. Further, it leverages a suite of novel signal processing algorithms to demodulate Bluetooth signal in realtime. We implement BlueFunnel prototype based on USRP2 devices. Specifically, we employ two USRR2 devices, each is equipped with SBX daughterboard, to build a customized software radio platform. The customized SDR platform is interfaced to the controller, which implements the digital signal processing algorithms on a personal laptop. We evaluate the system performance based on packet capture rates in a variety of interference conditions, mainly introduce by the 802.11based WLANs. BlueFunnel maintains good levels of packet capture rates in all settings. Further, we introduce two scenarios of attacks against Bluetooth, where BlueFunnel successfully reveals sensitive information about the target link."Pages iiiii.
Show less
 Title
 Secure and efficient spectrum sharing and QoS analysis in OFDMbased heterogeneous wireless networks
 Creator
 Alahmadi, Ahmed S.
 Date
 2016
 Collection
 Electronic Theses & Dissertations
 Description

"The Internet of Things (IoT), which networks versatile devices for information exchange, remote sensing, monitoring and control, is finding promising applications in nearly every field. However, due to its high density and enormous spectrum requirement, the practical development of IoT technology seems to be not available until the release of the large millimeter wave (mmWave) band (30GHz300GHz). Compared to existing lower band systems (such as 3G, 4G), mmWave band signals generally require...
Show more"The Internet of Things (IoT), which networks versatile devices for information exchange, remote sensing, monitoring and control, is finding promising applications in nearly every field. However, due to its high density and enormous spectrum requirement, the practical development of IoT technology seems to be not available until the release of the large millimeter wave (mmWave) band (30GHz300GHz). Compared to existing lower band systems (such as 3G, 4G), mmWave band signals generally require line of sight (LOS) path and suffer from severe fading effects, leading to much smaller coverage area. For network design and management, this implies that: (i) MmWave band alone could not support the IoT networks, but has to be integrated with the existing lower band systems through secure and effective spectrum sharing, especially in the lower frequency bands; and (ii) The IoT networks will have very high density node distribution, which is a significant challenge in network design, especially with the scarce energy budget of IoT applications. Motivated by these observations, in this dissertation, we consider three problems: (1) How to achieve secure and effective spectrum sharing? (2) How to accommodate the energy limited IoT devices? (3) How to evaluate the Quality of Service (QoS) in the high density IoT networks? We aim to develop innovative techniques for the design, evaluation and management of future IoT networks under both benign and hostile environments. The main contributions of this dissertation are outlined as follows. First, we develop a secure and efficient spectrum sharing scheme in singlecarrier wireless networks. Cognitive radio (CR) is a key enabling technology for spectrum sharing, where the unoccupied spectrum is identified for secondary users (SUs), without interfering with the primary user (PU). A serious security threat to the CR networks is referred to as primary user emulation attack (PUEA), in which a malicious user (MU) emulates the signal characteristics of the PU, thereby causing the SUs to erroneously identify the attacker as the PU. Here, we consider fullband PUEA detection and propose a reliable AESassisted DTV scheme, where an AESencrypted reference signal is generated at the DTV transmitter and used as the sync bits of the DTV data frames. For PU detection, we investigate the crosscorrelation between the received sequence and reference sequence. The MU detection can be performed by investigating the autocorrelation of the received sequence. We further develop a secure and efficient spectrum sharing scheme in multicarrier wireless networks. We consider subband malicious user detection and propose a secure AESbased DTV scheme, where the existing reference sequence used to generate the pilot symbols in the DVBT2 frames is encrypted using the AES algorithm. The resulted sequence is exploited for accurate detection of the authorized PU and the MU. Second, we develop an energy efficient transmission scheme in CR networks using energy harvesting. We propose a transmitting scheme for the SUs such that each SU can perform information reception and energy harvesting simultaneously. We perform sumrate optimization for the SUs under PUEA. It is observed that the sumrate of the SU network can be improved significantly with the energy harvesting technique. Potentially, the proposed scheme can be applied directly to the energyconstrained IoT networks. Finally, we investigate QoS performance analysis methodologies, which can provide insightful feedbacks to IoT network design and planning. Taking the spatial randomness of the IoT network into consideration, we investigate coverage probability (CP) and blocking probability (BP) in relayassisted OFDMA networks using stochastic geometry. More specifically, we model the intercell interference from the neighboring cells at each typical node, and derive the CP in the downlink transmissions. Based on their data rate requirements, we classify the incoming users into different classes, and calculate the BP using the multidimensional loss model."Pages iiiii.
Show less
 Title
 Automated addition of faulttolerance via lazy repair and graceful degradation
 Creator
 Lin, Yiyan
 Date
 2015
 Collection
 Electronic Theses & Dissertations
 Description

In this dissertation, we concentrate on the problem of automated addition of faulttolerance that transforms a faultintolerant program to be a faulttolerant program. We solve this problem via model repair. Model repair is a correctbyconstruct technique to revise an existing model so that the revised model satisfies the given correctness criteria, such as safety, liveness, or faulttolerance. We consider two problems of using model repair to add faulttolerance. First, if the repaired...
Show moreIn this dissertation, we concentrate on the problem of automated addition of faulttolerance that transforms a faultintolerant program to be a faulttolerant program. We solve this problem via model repair. Model repair is a correctbyconstruct technique to revise an existing model so that the revised model satisfies the given correctness criteria, such as safety, liveness, or faulttolerance. We consider two problems of using model repair to add faulttolerance. First, if the repaired model violates the assumptions (e.g., partial observability, inability to detect crashed processes, etc) made in the underlying system, then it cannot be implemented. We denote these requirements as realizability constraints. Second, the addition of faulttolerance may fail if the program cannot fully recover after certain faults occur. In this dissertation, we propose a lazy repair approach to address realizability issues in adding faulttolerance. Additionally, we propose a technique to automatically add graceful degradation to a program, so that the program can recover with partial functionality (that is identified by the designer to be the critical functionality) if full recovery is impossible.A model repair technique transforms a model to another model that satisfies a new set of properties. Such a transformation should also maintain the mapping between the model and the underlying program. For example, in a distributed program, every process is restricted to read (or write) some variables in other processes. A model that represents this program should also disallow the process to read (or write) those inaccessable variables. If these constraints are violated, then the corresponding model will be unrealizable. An unrealizable model (in this context, a model that violates the read/write restrictions) may make it impossible to obtain the corresponding implementation.%In this dissertation, we call the read (or write) restriction as a realizability constraint in distributed systems. An unrealizable model (a model that violates the realizability constraints) may complicate the implementation by introducing extra amount of modification to the program. Such modification may in turn break the program's correctness.Resolving realizability constraints increases the complexity of model repair. Existing model repair techniques introduce heuristics to reduce the complexity. However, this heuristicbased approach is designed and optimized specifically for distributed programs. We need a more generic model repair approach for other types of programs, e.g., synchronous programs, cyberphysical programs, etc. Hence, in this dissertation, we propose a model repair technique, i.e., lazy repair, to add faulttolerance to programs with different types of realizability constraints. It involves two steps. First, we only focus on repairing to obtain a model that satisfies correctness criteria while ignoring realizability constraints. In the second step, we repair this model further by removing behaviors while ensuring that the desired specification is preserved. The lazy repair approach simplifies the process of developing heuristics, and provides a tradeoff in terms of the time saved in the first step and the extra work required in the second step. We demonstrate that lazy repair is applicable in the context of distributed systems, synchronous systems and cyberphysical systems.In addition, safety critical systems such as airplanes, automobiles and elevators should operate with high dependability in the presence of faults. If the occurrence of faults breaks down some components, the system may not be able to fully recover. In this scenario, the system can still operate with remaining resources and deliver partial but core functionality, i.e., to display graceful degradation. Existing model repair approaches, such as addition of faulttolerance, cannot transform a program to provide graceful degradation. In this dissertation, we propose a technique to add faulttolerance to a program with graceful degradation. In the absence of faults, such a program exhibits ideal behaviors. In the presence of faults, the program is allowed to recover with reduced functionality. This technique involves two steps. First, it automatically generates a program with graceful degradation based on the input faultintolerant program. Second, it adds faulttolerance to the output program from first step. We demonstrate that this technique is applicable in the context of high atomicity programs as well as low atomicity programs (i.e., distributed programs). We also present a case study on adding multigraceful degradation to a dangerous gas detection and ventilation system. Through this case study, we show that our approach can assist the designer to obtain a program that behaves like the deployed system.
Show less
 Title
 Fluid animation on deforming surface meshes
 Creator
 Wang, Xiaojun (Graduate of Michigan State University)
 Date
 2017
 Collection
 Electronic Theses & Dissertations
 Description

"We explore methods for visually plausible fluid simulation on deforming surfaces with inhomogeneous diffusion properties. While there are methods for fluid simulation on surfaces, not much research effort focused on the influence of the motion of underlying surface, in particular when it is not a rigid surface, such as knitted or woven textiles in motion. The complexity involved makes the simulation challenging to account for the noninertial local frames typically used to describe the...
Show more"We explore methods for visually plausible fluid simulation on deforming surfaces with inhomogeneous diffusion properties. While there are methods for fluid simulation on surfaces, not much research effort focused on the influence of the motion of underlying surface, in particular when it is not a rigid surface, such as knitted or woven textiles in motion. The complexity involved makes the simulation challenging to account for the noninertial local frames typically used to describe the motion and the anisotropic effects in diffusion, absorption, adsorption. Thus, our primary goal is to enable fast and stable method for such scenarios. First, in preparation of the material properties for the surface domain, we describe textiles with salient feature direction by bulk material property tensors in order to reduce the complexity, by employing 2D homogenization technique, which effectively turns microscale inhomogeneous properties into homogeneous properties in macroscale descriptions. We then use standard texture mapping techniques to map these tensors to triangles in the curved surface mesh, taking into account the alignment of each local tangent space with correct feature directions of the macroscale tensor. We show that this homogenization tool is intuitive, flexible and easily adjusted. Second, for efficient description of the deforming surface, we offer a new geometry representation for the surface with solely angles instead of vertex coordinates, to reduce storage for the motion of underlying surface. Since our simulation tool relies heavily on long sequences of 3D curved triangular meshes, it is worthwhile exploring such efficient representations to make our tool practical by reducing the memory access during realtime simulations as well as reducing the file sizes. Inspired by anglebased representations for tetrahedral meshes, we use spectral method to restore curved surface using both angles of the triangles and dihedral angles between adjacent triangles in the mesh. Moreover, in many surface deformation sequences, it is often sufficient to update the dihedral angles while keeping the triangle interior angles fixed. Third, we propose a framework for simulating various effects of fluid flowing on deforming surfaces. We directly applied our simulator on curved surface meshes instead of in parameter domains, whereas many existing simulation methods require a parameterization on the surface. We further demonstrate that fictitious forces induced by the surface motion can be added to the surfacebased simulation at a small additional cost. These fictitious forces can be decomposed into different components. Only the rectilinear and Coriolis components are relevant to our choice of local frames. Other effects, such as diffusion, adsorption, absorption, and evaporation are also incorporated for realistic stain simulation. Finally, we explore the extraction of Lagrangian Coherent Structure (LCS), which is often referred to as the skeleton of fluid motion. The LCS structures are often described by ridges of the finite time Lyapunov exponent (FTLE) fields, which describe the extremal stretching of fluid parcels following the flow. We proposed a novel improvement to the ridge marching algorithm, which extract such ridges robustly for the typically noisy FTLE estimates even in welldefined fluid flows. Our results are potentially applicable to visualizing and controlling fluid trajectory patterns. In contrast to current methods for LCS calculation, which are only applicable to flat 2D or 3D domains and sensitive to noise, our ridge extraction is readily applicable to curved surfaces even when they are deforming. The collection of these computational tools will facilitate generation of realistic and easy to adjust surface fluid animation with various physically plausible effects on surface."Pages iiiii.
Show less
 Title
 Near duplicate image search
 Creator
 Li, Fengjie
 Date
 2014
 Collection
 Electronic Theses & Dissertations
 Description

Information retrieval addresses the fundamental problem of how to identify the objects from database that satisfies the information needs of users. Facing the information overload, the major challenge in search algorithm design is to ensure that useful information can be found both accurately and efficiently from large databases.To address this challenge, different indexing and retrieval methods had been proposed for different types of data, namely sparse data (e.g. documents), dense data (e...
Show moreInformation retrieval addresses the fundamental problem of how to identify the objects from database that satisfies the information needs of users. Facing the information overload, the major challenge in search algorithm design is to ensure that useful information can be found both accurately and efficiently from large databases.To address this challenge, different indexing and retrieval methods had been proposed for different types of data, namely sparse data (e.g. documents), dense data (e.g. dense feature vectors) and bagoffeatures (e.g. local feature represented images). For sparse data, inverted index and document retrieval models had been proved to be very effective for large scale retrieval problems. For dense data and bagoffeature data, however, there are still some open problems. For example, Locality Sensitive Hashing, a stateoftheart method for searching high dimensional vectors, often fails to make a good tradeoff between precision and recall. Namely, it tends to achieve high preci sion but with low recall or vice versa. The bagofwords model, a popular approach for searching objects represented bagoffeatures, has a limited performance because of the information loss during the quantization procedure.Since the general problem of searching objects represented in dense vectors and bagoffeatures may be too challenging, in this dissertation, we focus on nearly duplicate search, in which the matched objects is almost identical to the query. By effectively exploring the statistical proper ties of near duplicities, we will be able to design more effective indexing schemes and search algorithms. Thus, the focus of this dissertation is to design new indexing methods and retrieval algorithms, for near duplicate search in large scale databases, that accurately capture the data simi larity and delivers more accurate and efficient search. Below, we summarize the main contributions of this dissertation:Our first contribution is a new algorithm for searching near duplicate bagoffeatures data. The proposed algorithm, named random seeding quantization, is more efficient in generating bagof words representations for near duplicate images. The new scheme is motivated by approximating the optimal partial matching between bagoffeatures, and thus produces a bagofwords representation capturing the true similarities of the data, leading to more accurate and efficient retrieval of bagoffeatures data.Our second contribution, termed Random Projection Filtering, is a search algorithm designed for efficient near duplicate vector search. By explicitly exploiting the statistical properties of near duplicity, the algorithm projects high dimensional vectors into lower dimensional space and filter out irrelevant items. Our effective filtering procedure makes RPF more accurate and efficient to identify nearly duplicate objects in databases.Our third contribution is to develop and evaluate a new randomized range search algorithm for near duplicate vectors in high dimensional spaces, termed as Random Projection Search. Different from RPF, the algorithm presented in this chapter is suitable for a wider range of applications be cause it does not require the sparsity constrains for high search accuracy. The key idea is to project both the data points and the query point into an one dimensional space by a random projection, and perform one dimensional range search to find the subset of data points that are within the range of a given query using binary search. We prove the theoretical guarantee for the proposed algorithm and evaluate its empirical performance on a dataset of 1.1 billion image features.
Show less
 Title
 Robust multitask learning algorithms for predictive modeling of spatial and temporal data
 Creator
 Liu, Xi (Graduate of Michigan State University)
 Date
 2019
 Collection
 Electronic Theses & Dissertations
 Description

"Recent years have witnessed the significant growth of spatial and temporal data generated from various disciplines, including geophysical sciences, neuroscience, economics, criminology, and epidemiology. Such data have been extensively used to train spatial and temporal models that can make predictions either at multiple locations simultaneously or along multiple forecasting horizons (lead times). However, training an accurate prediction model in these domains can be challenging especially...
Show more"Recent years have witnessed the significant growth of spatial and temporal data generated from various disciplines, including geophysical sciences, neuroscience, economics, criminology, and epidemiology. Such data have been extensively used to train spatial and temporal models that can make predictions either at multiple locations simultaneously or along multiple forecasting horizons (lead times). However, training an accurate prediction model in these domains can be challenging especially when there are significant noise and missing values or limited training examples available. The goal of this thesis is to develop novel multitask learning frameworks that can exploit the spatial and/or temporal dependencies of the data to ensure robust predictions in spite of the data quality and scarcity problems. The first framework developed in this dissertation is designed for multitask classification of time series data. Specifically, the prediction task here is to continuously classify activities of a human subject based on the multimodal sensor data collected in a smart home environment. As the classes exhibit strong spatial and temporal dependencies, this makes it an ideal setting for applying a multitask learning approach. Nevertheless, since the type of sensors deployed often vary from one room (location) to another, this introduces a structured missing value problem, in which blocks of sensor data could be missing when a subject moves from one room to another. To address this challenge, a probabilistic multitask classification framework is developed to jointly model the activity recognition tasks from all the rooms, taking into account the blockmissing value problem. The framework also learns the transitional dependencies between classes to improve its overall prediction accuracy. The second framework is developed for the multilocation time series forecasting problem. Although multitask learning has been successfully applied to many time series forecasting applications such as climate prediction, conventional approaches aim to minimize only the pointwise residual error of their predictions instead of considering how well their models fit the overall distribution of the response variable. As a result, their predicted distribution may not fully capture the true distribution of the data. In this thesis, a novel distributionpreserving multitask learning framework is proposed for the multilocation time series forecasting problem. The framework uses a nonparametric density estimation approach to fit the distribution of the response variable and employs an L2distance function to minimize the divergence between the predicted and true distributions. The third framework proposed in this dissertation is for the multistepahead (longrange) time series prediction problem with application to ensemble forecasting of sea surface temperature. Specifically, our goal is to effectively combine the forecasts generated by various numerical models at different lead times to obtain more precise predictions. Towards this end, a multitask deep learning framework based on a hierarchical LSTM architecture is proposed to jointly model the ensemble forecasts of different models, taking into account the temporal dependencies between forecasts at different lead times. Experiments performed on 29year sea surface temperature data from North American MultiModel Ensemble (NAMME) demonstrate that the proposed architecture significantly outperforms standard LSTM and other MTL approaches."Pages iiiii.
Show less
 Title
 Statistical and learning algorithms for the design, analysis, measurement, and modeling of networking and security systems
 Creator
 Shahzad, Muhammad (College teacher)
 Date
 2015
 Collection
 Electronic Theses & Dissertations
 Description

"The goal of this thesis is to develop statistical and learning algorithms for the design, analysis, measurement, and modeling of networking and security systems with specific focus on RFID systems, network performance metrics, user security, and software security. Next, I give a brief overview of these four areas of focus."  Abstract.
 Title
 Geometric and topological modeling techniques for large and complex shapes
 Creator
 Feng, Xin
 Date
 2014
 Collection
 Electronic Theses & Dissertations
 Description

The past few decades have witnessed the incredible advancements in modeling, digitizing and visualizing techniques for three–dimensional shapes. Those advancements led to an explosion in the number of three–dimensional models being created for design, manufacture, architecture, medical imaging, etc. At the same time, the structure, function, stability, and dynamics of proteins, subcellular structures, organelles, and multiprotein complexes have emerged as a leading interest in...
Show moreThe past few decades have witnessed the incredible advancements in modeling, digitizing and visualizing techniques for three–dimensional shapes. Those advancements led to an explosion in the number of three–dimensional models being created for design, manufacture, architecture, medical imaging, etc. At the same time, the structure, function, stability, and dynamics of proteins, subcellular structures, organelles, and multiprotein complexes have emerged as a leading interest in structural biology, another major source of large and complex geometric models. Geometric modeling not only provides visualizations of shapes for large biomolecular complexes but also fills the gap between structural information and theoretical modeling, and enables the understanding of function, stability, and dynamics.We first propose, for tessellated volumes of arbitrary topology, a compact data structure that offers constant–time–complexity incidence queries among cells of any dimensions. Our data structure is simple to implement, easy to use, and allows for arbitrary, user–defined 3–cells such as prisms and hexahedra, while remaining highly efficient in memory usage compared to previous work. We also provide the analysis on its time complexity for commonly–used incidence and adjacency queries such as vertex and edge one–rings.We then introduce a suite of computational tools for volumetric data processing, information extraction, surface mesh rendering, geometric measurement, and curvature estimation for biomolecular complexes. Particular emphasis is given to the modeling of Electron Microscopy Data Bank (EMDB) data and Protein Data Bank (PDB) data. Lagrangian and Cartesian representations are discussed for the surface presentation. Based on these representations, practical algorithms are developed for surface area and surface–enclosed volume calculation, and curvature estimation. Methods for volumetric meshing have also been presented. Because the technological development in computer science and mathematics has led to a variety of choices at each stage of the geometric modeling, we discuss the rationales in the design and selection of various algorithms. Analytical test models are designed to verify the computational accuracy and convergence of proposed algorithms. We selected six EMDB data and six PDB data to demonstrate the efficacy of the proposed algorithms in handling biomolecular surfaces and explore their capability of geometric characterization of binding targets. Thus, our toolkit offers a comprehensive protocol for the geometric modeling of proteins, subcellular structures, organelles, and multiprotein complexes.Furthermore, we present a method for computing “choking” loops—a set of surface loops that describe the narrowing of the volumes inside/outside of the surface and extend the notion of surface homology and homotopy loops. The intuition behind their definition is that a choking loop represents the region where an offset of the original surface would get pinched. Our generalized loops naturally include the usual2g handles/tunnels computed based on the topology of the genus–g surface, but also include loops that identify chokepoints or bottlenecks, i.e., boundaries of small membranes separating the inside or outside volume of the surface into disconnected regions. Our definition is based on persistent homology theory, which gives a measure to topological structures, thus providing resilience to noise and a well–defined way to determine topological feature size.Finally, we explore the application of persistent homology theory in protein folding analysis. The extremely complex process of protein folding brings challenges for both experimental study and theoretical modeling. The persistent homology approach studies the Euler characteristics of the protein conformations during the folding process. More precisely, the persistence is measured by the variation of van der Waals radius, which leads to the change of protein 3D structures and uncovers the inter–connectivity. Our results on fullerenes demonstrate the potential of our geometric and topological approach to protein stability analysis.
Show less
 Title
 Privacy and integrity preserving computation in distributed systems
 Creator
 Chen, Fei
 Date
 2011
 Collection
 Electronic Theses & Dissertations
 Description

Preserving privacy and integrity of private data has become core requirements for many distributed systems across different parties. In these systems, one party may try to compute or aggregate useful information from the private data of other parties. However, this party is not be fully trusted by other parties. Therefore, it is important to design security protocols for preserving such private data. Furthermore, one party may want to query the useful information computed from such private...
Show morePreserving privacy and integrity of private data has become core requirements for many distributed systems across different parties. In these systems, one party may try to compute or aggregate useful information from the private data of other parties. However, this party is not be fully trusted by other parties. Therefore, it is important to design security protocols for preserving such private data. Furthermore, one party may want to query the useful information computed from such private data. However, query results may be modified by a malicious party. Thus, it is important to design query protocols such that query result integrity can be verified.In this dissertation, we study four important privacy and integrity preserving problems for different distributed systems. For twotiered sensor networks, where storage nodes serve as an intermediate tier between sensors and a sink for storing data and processing queries, we proposed SafeQ, a protocol that prevents compromised storage nodes from gaining information from both sensor collected data and sink issued queries, while it still allows storage nodes to process queries over encrypted data and the sink to detect compromised storage nodes when they misbehave. For cloud computing, where a cloud provider hosts the data of an organization and replies query results to the customers of the organization, we propose novel privacy and integrity preserving schemes for multidimensional range queries such that the cloud provider can process encoded queries over encoded data without knowing the actual values, and customers can verify the integrity of query results with high probability. For distributed firewall policies, we proposed the first privacypreserving protocol for crossdomain firewall policy optimization. For any two adjacent firewalls belonging to two different administrative domains, our protocol can identify in each firewall the rules that can be removed because of the other firewall. For network reachability, one of the key factors for capturing endtoend network behavior and detecting the violation of security policies, we proposed the first crossdomain privacypreserving protocol for quantifying network reachability.
Show less
 Title
 Metamodeling framework for simultaneous multiobjective optimization using efficient evolutionary algorithms
 Creator
 Roy, Proteek Chandan
 Date
 2019
 Collection
 Electronic Theses & Dissertations
 Description

Most realworld problems are comprised of multiple conflicting objectives and solutions to those problems are multiple Paretooptimal tradeoff solutions. The main challenge of these practical problems is that the objectives and constraints do not have any closed functional forms and they are expensive for computation as well. Objectives coming from finite element analysis, computational fluid dynamics software, network flow simulators, crop modeling, weather modeling or any other simulations...
Show moreMost realworld problems are comprised of multiple conflicting objectives and solutions to those problems are multiple Paretooptimal tradeoff solutions. The main challenge of these practical problems is that the objectives and constraints do not have any closed functional forms and they are expensive for computation as well. Objectives coming from finite element analysis, computational fluid dynamics software, network flow simulators, crop modeling, weather modeling or any other simulations which involve partial differential equations are good examples of expensive problems. These problems can also be regarded as l03000300owbudget'' problems since only a few solution evaluations can be performed given limited time. Nevertheless, parameter estimation and optimization of objectives related to these simulations require a good number of solution evaluations to come up with better parameters or a reasonably good tradeoff front. To provide an efficient search process within a limited number of exact evaluations, metamodelassisted algorithms have been proposed in the literature. These algorithms attempt to construct a computationally inexpensive representative model of the problem, having the same global optima and thereby providing a way to carry out the optimization in metamodel space in an efficient way. Populationbased methods like evolutionary algorithms have become standard for solving multiobjective problems and recently Metamodelbased evolutionary algorithms are being used for solving expensive problems. In this thesis, we would like to address a few challenges of metamodelbased optimization algorithms and propose some efficient and innovative ways to construct these algorithms. To approach efficient design of metamodelbased optimization algorithm, one needs to address the choice of metamodeling functions. The most trivial way is to build metamodels for each objective and constraint separately. But we can reduce the number of metamodel constructions by using some aggregated functions and target either single or multiple optima in each step. We propose a taxonomy of possible metamodelbased algorithmic frameworks which not only includes most algorithms from the literature but also suggests some new ones. We improve each of the frameworks by introducing trust region concepts in the multiobjective scenario and present two strategies for building trust regions. Apart from addressing the main bottleneck of the limited number of solution evaluations, we also propose efficient nondominated sorting methods that further reduce computational time for a basic step of multiobjective optimization. We have carried out extensive experiments over all representative metamodeling frameworks and shown that each of them can solve a good number of test problems. We have not tried to tune the algorithmic parameters yet and it remains as our future work. Our theoretical analyses and extensive experiments suggest that we can achieve efficient metamodelbased multiobjective optimization algorithms for solving test as well as realworld expensive and lowbudget problems.
Show less
 Title
 Measurement and modeling of large scale networks
 Creator
 Shafiq, Muhammad Zubair
 Date
 2014
 Collection
 Electronic Theses & Dissertations
 Description

The goal of this thesis is to identify measurement, modeling, and optimization opportunities for large scale networks  with specific focus on cellular networks and online social networks. These networks are facing unprecedented operational challenges due to their very large scale.Cellular networks are experiencing an explosive increase in the volume of traffic for the last few years. This unprecedented increase in the volume of mobile traffic is attributed to the increase in the subscriber...
Show moreThe goal of this thesis is to identify measurement, modeling, and optimization opportunities for large scale networks  with specific focus on cellular networks and online social networks. These networks are facing unprecedented operational challenges due to their very large scale.Cellular networks are experiencing an explosive increase in the volume of traffic for the last few years. This unprecedented increase in the volume of mobile traffic is attributed to the increase in the subscriber base, improving network connection speeds, and improving hardware and software capabilities of modern smartphones. In contrast to the traditional fixed IP networks, mobile network operators are faced with the constraint of limited radio frequency spectrum at their disposal. As the communication technologies evolve beyond 3G to Long Term Evolution (LTE), the competition for the limited radio frequency spectrum is becoming even more intense. Therefore, mobile network operators increasingly focus on optimizing different aspects of the network by customized design and management to improve key performance indicators (KPIs).Online social networks are increasing at a very rapid pace, while trying to provide more contentrich and interactive services to their users. For instance, Facebook currently has more than 1.2 billion monthly active users and offers news feed, graph search, groups, photo sharing, and messaging services. The information for such a large user base cannot be efficiently and securely managed by traditional database systems. Social network service providers are deploying novel large scale infrastructure to cope with these scaling challenges.In this thesis, I present novel approaches to tackle these challenges by revisiting the current practices for the design, deployment, and management of large scale network systems using a combination of theoretical and empirical methods. I take a datadriven approach in which the theoretical and empirical analyses are intertwined. First, I measure and analyze the trends in data and then model the identified trends using suitable parametric models. Finally, I rigorously evaluate the developed models and the resulting system design prototypes using extensive simulations, realistic testbed environments, or realworld deployment. This methodology is to used to address several problems related to cellular networks and online social networks.
Show less
 Title
 Scheduling for CPU Packing and node shutdown to reduce the energy consumption of high performance computing centers
 Creator
 Vudayagiri, Srikanth Phani
 Date
 2010
 Collection
 Electronic Theses & Dissertations
 Description

During the past decade, there has been a tremendous growth in the high performance computing and data center arenas. The huge energy requirements in these sectors have prompted researchers to investigate possible ways to reduce their energy consumption. Reducing the energy consumption is not only beneficial to an organization economically but also to the environment. In this thesis, we focus our attention on high performance scientific computing clusters. We first perform experiments with the...
Show moreDuring the past decade, there has been a tremendous growth in the high performance computing and data center arenas. The huge energy requirements in these sectors have prompted researchers to investigate possible ways to reduce their energy consumption. Reducing the energy consumption is not only beneficial to an organization economically but also to the environment. In this thesis, we focus our attention on high performance scientific computing clusters. We first perform experiments with the CPU Packing feature available in Linux using programs from the SPEC CPU2000 suite. We then look at an energyaware scheduling algorithm for the cluster that assumes that CPU Packing is enabled on all the nodes. Using simulations, we compare the scheduling done by this algorithm to that done by the existing, commercial Moab scheduler in the cluster. We experiment with the Moab Green Computing feature and based on our observations, we implement the shutdown mechanism used by Moab in our simulations. Our results show that Moab Green Computing could provide about an 13% energy savings on average for the HPC cluster without any noticeable decrease in the performance of jobs.
Show less
 Title
 The evolutionary potential of populations on complex fitness landscapes
 Creator
 Bryson, David Michael
 Date
 2012
 Collection
 Electronic Theses & Dissertations
 Description

Evolution is a highly contingent process, where the quality of the solutions produced is affected by many factors. I explore and describe the contributions of three such aspects that influence overall evolutionary potential: the prior history of a population, the type and frequency of mutations that the organisms are subject to, and the composition of the underlying genetic hardware. I have systematically tested changes to a digital evolution system, Avida, measuring evolutionary potential in...
Show moreEvolution is a highly contingent process, where the quality of the solutions produced is affected by many factors. I explore and describe the contributions of three such aspects that influence overall evolutionary potential: the prior history of a population, the type and frequency of mutations that the organisms are subject to, and the composition of the underlying genetic hardware. I have systematically tested changes to a digital evolution system, Avida, measuring evolutionary potential in seven different computational environments ranging in complexity of the underlying fitness landscapes. I have examined trends and general principles that these measurements demonstrate and used my results to optimize the evolutionary potential of the system, broadly enhancing performance. The results of this work show that history and mutation rate play significant roles in evolutionary potential, but the final fitness levels of populations are remarkably stable to substantial changes in the genetic hardware and a broad range of mutation types.
Show less
 Title
 Distancepreserving graphs
 Creator
 Nussbaum, Ronald
 Date
 2014
 Collection
 Electronic Theses & Dissertations
 Description

Let G be a simple graph on n vertices, where d_G(u,v) denotes the distance between vertices u and v in G. An induced subgraph H of G is isometric if d_H(u,v)=d_G(u,v) for all u,v in V(H). We say that G is a distancepreserving graph if G contains at least one isometric subgraph of order k for every k where 1<=k<=n.A number of sufficient conditions exist for a graph to be distancepreserving. We show that all hypercubes and graphs with delta(G)>=2n/31 are distancepreserving. Towards this end...
Show moreLet G be a simple graph on n vertices, where d_G(u,v) denotes the distance between vertices u and v in G. An induced subgraph H of G is isometric if d_H(u,v)=d_G(u,v) for all u,v in V(H). We say that G is a distancepreserving graph if G contains at least one isometric subgraph of order k for every k where 1<=k<=n.A number of sufficient conditions exist for a graph to be distancepreserving. We show that all hypercubes and graphs with delta(G)>=2n/31 are distancepreserving. Towards this end, we carefully examine the role of "forbidden" subgraphs. We discuss our observations, and provide some conjectures which we computationally verified for small values of n. We say that a distancepreserving graph is sequentially distancepreserving if each subgraph in the set of isometric subgraphs is a superset of the previous one, and consider this special case as well.There are a number of questions involving the construction of distancepreserving graphs. We show that it is always possible to add an edge to a noncomplete sequentially distancepreserving graph such that the augmented graph is still sequentially distancepreserving. We further conjecture that the same is true of all distancepreserving graphs. We discuss our observations on making nondistancepreserving graphs into distance preserving ones via adding edges. We show methods for constructing regular distancepreserving graphs, and consider constructing distancepreserving graphs for arbitrary degree sequences. As before, all conjectures here have been computationally verified for small values of n.
Show less
 Title
 Distance preserving graphs
 Creator
 Zahedi, Emad
 Date
 2017
 Collection
 Electronic Theses & Dissertations
 Description

"The computational complexity of exploring distance properties of large graphs such as realworld social networks which consist of millions of nodes is extremely expensive. Recomputing distances in subgraphs of the original graph will add to the cost. One way to avoid this is to use subgraphs where the distance between any pair of vertices is the same as in the original graph. Such a subgraph is called isometric. A connected graph is distance preserving, for which we use the abbreviation dp,...
Show more"The computational complexity of exploring distance properties of large graphs such as realworld social networks which consist of millions of nodes is extremely expensive. Recomputing distances in subgraphs of the original graph will add to the cost. One way to avoid this is to use subgraphs where the distance between any pair of vertices is the same as in the original graph. Such a subgraph is called isometric. A connected graph is distance preserving, for which we use the abbreviation dp, if it has an isometric subgraph of every order. In this framework we study dp graphs from both the structural and algorithmic perspectives. First, we study the structural nature of dp graphs. This involves classifying graphs based on the dp property and the relation between dp graphs to other graph classes. Second, we study the recognition problem of dp graphs. We intend to develop efficient algorithms for finding isometric subgraphs as well as deciding whether a graph is dp or not."Page ii.
Show less
 Title
 Achieving reliable distributed systems : through efficient runtime monitoring and predicate detection
 Creator
 Tekken Valapil, Vidhya
 Date
 2020
 Collection
 Electronic Theses & Dissertations
 Description

Runtime monitoring of distributed systems to perform predicate detection is critical as well as a challenging task. It is critical because it ensures the reliability of the system by detecting all possible violations of system requirements. It is challenging because to guarantee lack of violations one has to analyze every possible ordering of system events and this is an expensive task. In this report, wefocus on ordering events in a system run using HLC (Hybrid Logical Clocks) timestamps,...
Show moreRuntime monitoring of distributed systems to perform predicate detection is critical as well as a challenging task. It is critical because it ensures the reliability of the system by detecting all possible violations of system requirements. It is challenging because to guarantee lack of violations one has to analyze every possible ordering of system events and this is an expensive task. In this report, wefocus on ordering events in a system run using HLC (Hybrid Logical Clocks) timestamps, which are O(1) sized timestamps, and present some efficient algorithms to perform predicate detection using HLC. Since, with HLC, the runtime monitor cannot find all possible orderings of systems events, we present a new type of clock called Biased Hybrid Logical Clocks (BHLC), that are capable of finding more possible orderings than HLC. Thus we show that BHLC based predicate detection can find more violations than HLC based predicate detection. Since predicate detection based on both HLC and BHLC do not guarantee detection of all possible violations in a system run, we present an SMT (Satisfiability Modulo Theories) solver based predicate detection approach, that guarantees the detection of all possible violations in a system run. While a runtime monitor that performs predicate detection using SMT solvers is accurate, the time taken by the solver to detect the presence or absence of a violation can be high. To reduce the time taken by the runtime monitor, we propose the use of an efficient twolayered monitoring approach, where the first layer of the monitor is efficient but less accurate and the second layer is accurate but less efficient. Together they reduce the overall time taken to perform predicate detection drastically and also guarantee detection of all possible violations.
Show less
 Title
 Faster algorithms for machine learning problems in high dimension
 Creator
 Ye, Mingquan
 Date
 2019
 Collection
 Electronic Theses & Dissertations
 Description

"When dealing with datasets with high dimension, the existing machine learning algorithms often do not work in practice. Actually, most of the realworld data has the nature of low intrinsic dimension. For example, data often lies on a lowdimensional manifold or has a low doubling dimension. Inspired by this phenomenon, this thesis tries to improve the time complexities of two fundamental problems in machine learning using some techniques in computational geometry. In Chapter two, we propose...
Show more"When dealing with datasets with high dimension, the existing machine learning algorithms often do not work in practice. Actually, most of the realworld data has the nature of low intrinsic dimension. For example, data often lies on a lowdimensional manifold or has a low doubling dimension. Inspired by this phenomenon, this thesis tries to improve the time complexities of two fundamental problems in machine learning using some techniques in computational geometry. In Chapter two, we propose a bicriteria approximation algorithm for minimum enclosing ball with outliers and extend it to the outlier recognition problem. By virtue of the "coreset" idea and the Random Gradient Descent Tree, we propose an efficient algorithm which is linear in the number of points n and the dimensionality d, and provides a probability bound. In experiments, compared with some existing outlier recognition algorithms, our method is proven to be efficient and robust to the outlier ratios. In Chapter three, we adopt the "doubling dimension" to characterize the intrinsic dimension of a point set. By the property of doubling dimension, we can approximate the geometric alignment between two point sets by executing the existing alignment algorithms on their subsets, which achieves a much smaller time complexity. More importantly, the proposed approximate method has a theoretical upper bound and can serve as the preprocessing step of any alignment algorithm."Page ii.
Show less
 Title
 Reliable 5G system design and networking
 Creator
 Liang, Yuan (Graduate of Michigan State University)
 Date
 2019
 Collection
 Electronic Theses & Dissertations
 Description

The upcoming fifth generation (5G) system is expected to support a variety of different devices and applications, such as ultrareliable and low latency communications, Internet of Things (IoT) and mobile cloud computing. Reliable and effective communications lie in the core of the 5G system design. This dissertation is focused on the design and evaluation of robust 5G systems under both benign and malicious environments, with considerations on both the physical layer and higher layers. For...
Show moreThe upcoming fifth generation (5G) system is expected to support a variety of different devices and applications, such as ultrareliable and low latency communications, Internet of Things (IoT) and mobile cloud computing. Reliable and effective communications lie in the core of the 5G system design. This dissertation is focused on the design and evaluation of robust 5G systems under both benign and malicious environments, with considerations on both the physical layer and higher layers. For the physical layer, we study secure and efficient 5G transceiver under hostile jamming. We propose a securely precoded OFDM (SPOFDM) system for efficient and reliable transmission under disguised jamming, a serious threat to 5G, where the jammer intentionally confuses the receiver by mimicking the characteristics of the authorized signal, and causes complete communication failure. We bring off a dynamic constellation by introducing secure randomness between the legitimate transmitter and receiver, and hence break the symmetricity between the authorized signal and the disguised jamming. It is shown that due to the secure randomness shared between the authorized transmitter and receiver, SPOFDM can achieve a positive channel capacity under disguised jamming. The robustness of the proposed SPOFDM scheme under disguised jamming is demonstrated through both theoretic and numerical analyses. We further address the problem of finding the worst jamming distribution in terms of channel capacity for the SPOFDM system. We consider a practical communication scenario, where the transmitting symbols are uniformly distributed over a discrete and finite alphabet, and the jamming interference is subject to an average power constraint, but may or may not have a peak power constraint. Using tools in functional analysis and complex analysis, first, we prove the existence and uniqueness of the worst jamming distribution. Second, by analyzing the KuhnTucker conditions for the worst jamming, we prove that the worst jamming distribution is discrete in amplitude with a finite number of mass points. For the higher layers, we start with the modeling of 5G highdensity heterogeneous networks. We investigate the effect of relay randomness on the endtoend throughput in multihop wireless networks using stochastic geometry. We model the nodes as Poisson Point Processes and calculate the spatial average of the throughput over all potential geometrical patterns of the nodes. More specifically, for problem tractability, we first consider the simple nearest neighbor (NN) routing protocol, and analyze the endtoend throughput so as to obtain a performance benchmark. Next, note that the ideal equaldistance routing is generally not realizable due to the randomness in relay distribution, we propose a quasiequaldistance (QED) routing protocol. We derive the range for the optimal hop distance, and analyze the endtoend throughput both with and without intraroute resource reuse. It is shown that the proposed QED routing protocol achieves a significant performance gain over NN routing. Finally, we consider the malicious link detection in multihop wireless sensor networks (WSNs), which is an important application of 5G multihop wireless networks. Existing work on malicious link detection generally requires that the detection process being performed at the intermediate nodes, leading to considerable overhead in system design, as well as unstable detection accuracy due to limited resources and the uncertainty in the loyalty of the intermediate nodes themselves. We propose an efficient and robust malicious link detection scheme by exploiting the statistics of packet delivery rates only at the base stations. More specifically, first, we present a secure packet transmission protocol to ensure that except the base stations, any intermediate nodes on the route cannot access the contents and routing paths of the packets. Second, we design a malicious link detection algorithm that can effectively detect the irregular dropout at every hop (or link) along the routing path with guaranteed false alarm rate and low miss detection rate.
Show less
 Title
 Formalization and verification of property specification patterns
 Creator
 Bryndin, Dmitriy
 Date
 2010
 Collection
 Electronic Theses & Dissertations
 Description

Finitestate verification (FSV) techniques are intended for proving properties of software systems. Although significant progress has been made in the last decade automating FSV techniques, the adoption of these techniques by software developers is low. The Specification Pattern System (SPS) is intended to assist users in creating such specifications. It identifies common specification patterns and indicates how to translate the patterns into a variety of different specification languages....
Show moreFinitestate verification (FSV) techniques are intended for proving properties of software systems. Although significant progress has been made in the last decade automating FSV techniques, the adoption of these techniques by software developers is low. The Specification Pattern System (SPS) is intended to assist users in creating such specifications. It identifies common specification patterns and indicates how to translate the patterns into a variety of different specification languages. However, the patterns in the SPS are defined informally and their translations are not verified. This work discusses the informal nature of these definitions, proposes a formalization for them and provides formal proofs for the translation of patterns to Linear Temporal Logic.
Show less
 Title
 Exploiting crosstechnology interference for efficient network services in wireless systems
 Creator
 Zhou, Ruogu
 Date
 2014
 Collection
 Electronic Theses & Dissertations
 Description

In the last decade, we have witnessed the wide adoption of a variety of wireless technologies like WiFi, Cellular, Bluetooth, ZigBee, and Nearfield Communication(NFC). However, the fast growth of wireless networks generates significant crosstechnology interference, which leads to network performance degradation and potential security breach. In this dissertation, we propose two novel physical layer techniques to deal with the interference, and improve the performance and security of sensor...
Show moreIn the last decade, we have witnessed the wide adoption of a variety of wireless technologies like WiFi, Cellular, Bluetooth, ZigBee, and Nearfield Communication(NFC). However, the fast growth of wireless networks generates significant crosstechnology interference, which leads to network performance degradation and potential security breach. In this dissertation, we propose two novel physical layer techniques to deal with the interference, and improve the performance and security of sensor networks and mobile systems, respectively. First, we exploit the WiFi interference as a ``blessing" in the design of sensor networks and develop novel WiFi interference detection techniques for ZigBee sensors. Second, utilizing these techniques, we design three efficient network services: WiFi discovery which detects the existence of nearby WiFi networks using ZigBee sensors, WiFi performance monitoring which measures and tracks performance of WiFi networks using a ZigBee sensor network, and time synchronization which provides synchronized clocks for sensor networks based on WiFi signals. Third, we design a novel, noninvasive NFC security system called {\em nShield} to reduce the transmission power of NFC radios, which protects NFC against passive eavesdropping. nShield implements a novel adaptive RF attenuation scheme, in which the extra RF energy of NFC transmissions is determined and absorbed by nShield. At the same time, nShield scavenges the extra RF energy to sustain the perpetual operation. Together with the extremely lopower design, it enables nShield to provide the host uninterrupted protection against malicious eavesdropping. The above systems are implemented and extensively evaluated on a testbed of sensor networks and smartphones.
Show less