QMediaRecorder#

The QMediaRecorder class is used for encoding and recording a capture session. More…

Synopsis#

Properties#

actualLocation - Actual location of the last media content
audioBitRate
audioChannelCount
audioSampleRate
duration - The recorded media duration in milliseconds
encodingMode
error
errorString
mediaFormat
metaData
outputLocation - The destination location of media content
quality
recorderState - Current state of the media recorder
videoBitRate
videoFrameRate
videoResolution

Functions#

def actualLocation ()
def addMetaData (metaData)
def audioBitRate ()
def audioChannelCount ()
def audioSampleRate ()
def captureSession ()
def duration ()
def encodingMode ()
def error ()
def errorString ()
def isAvailable ()
def mediaFormat ()
def metaData ()
def outputLocation ()
def quality ()
def recorderState ()
def setAudioBitRate (bitRate)
def setAudioChannelCount (channels)
def setAudioSampleRate (sampleRate)
def setEncodingMode (arg__1)
def setMediaFormat (format)
def setMetaData (metaData)
def setOutputLocation (location)
def setQuality (quality)
def setVideoBitRate (bitRate)
def setVideoFrameRate (frameRate)
def setVideoResolution (arg__1)
def setVideoResolution (width, height)
def videoBitRate ()
def videoFrameRate ()
def videoResolution ()

Slots#

def pause ()
def record ()
def stop ()

Signals#

def actualLocationChanged (location)
def audioBitRateChanged ()
def audioChannelCountChanged ()
def audioSampleRateChanged ()
def durationChanged (duration)
def encoderSettingsChanged ()
def encodingModeChanged ()
def errorChanged ()
def errorOccurred (error, errorString)
def mediaFormatChanged ()
def metaDataChanged ()
def qualityChanged ()
def recorderStateChanged (state)
def videoBitRateChanged ()
def videoFrameRateChanged ()
def videoResolutionChanged ()

Note

This documentation may contain snippets that were automatically translated from C++ to Python. We always welcome contributions to the snippet translation. If you see an issue with the translation, you can also let us know by creating a ticket on https:/bugreports.qt.io/projects/PYSIDE

Detailed Description#

Warning

This section contains snippets that were automatically translated from C++ to Python and may contain errors.

The QMediaRecorder class is a class for encoding and recording media generated in a QMediaCaptureSession .

session = QMediaCaptureSession()
audioInput = QAudioInput()
session.setAudioInput(input)
recorder = QMediaRecorder()
session.setRecorder(recorder)
recorder.setQuality(QMediaRecorder.HighQuality)
recorder.setOutputLocation(QUrl.fromLocalFile("test.mp3"))
recorder.record()

class PySide6.QtMultimedia.QMediaRecorder([parent=None])#

Parameters:: parent – PySide6.QtCore.QObject

Constructs a media recorder which records the media produced by a microphone and camera. The media recorder is a child of parent.

Note

Properties can be used directly when from __feature__ import true_property is used or via accessor functions otherwise.

property PᅟySide6.QtMultimedia.QMediaRecorder.actualLocation: PySide6.QtCore.QUrl#

This property holds The actual location of the last media content..

The actual location is usually available after recording starts, and reset when new location is set or new recording starts.

Access functions:

actualLocation ()
Signal actualLocationChanged (location)

property PᅟySide6.QtMultimedia.QMediaRecorder.audioBitRate: int#

Access functions:

audioBitRate ()
setAudioBitRate (bitRate)
Signal audioBitRateChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.audioChannelCount: int#

Access functions:

audioChannelCount ()
setAudioChannelCount (channels)
Signal audioChannelCountChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.audioSampleRate: int#

Access functions:

audioSampleRate ()
setAudioSampleRate (sampleRate)
Signal audioSampleRateChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.duration: int#

This property holds the recorded media duration in milliseconds..

Access functions:

duration ()
Signal durationChanged (duration)

property PᅟySide6.QtMultimedia.QMediaRecorder.encodingMode: EncodingMode#

Access functions:

encodingMode ()
setEncodingMode (arg__1)
Signal encodingModeChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.error: Error#

Returns the current error state.

See also

errorString()

Access functions:

error ()
Signal errorChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.errorString: str#

Returns a string describing the current error state.

See also

error()

Access functions:

errorString ()
Signal errorChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.mediaFormat: PySide6.QtMultimedia.QMediaFormat#

Returns the recording media format.

Access functions:

mediaFormat ()
setMediaFormat (format)
Signal mediaFormatChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.metaData: PySide6.QtMultimedia.QMediaMetaData#

Returns the metaData associated with the recording.

Access functions:

metaData ()
setMetaData (metaData)
Signal metaDataChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.outputLocation: PySide6.QtCore.QUrl#

This property holds the destination location of media content..

Setting the location can fail, for example when the service supports only local file system locations but a network URL was passed. If the operation fails an errorOccured() signal is emitted.

The output location can be relative or empty; in the latter case the recorder uses the system specific place and file naming scheme.

Access functions:

outputLocation ()
setOutputLocation (location)

property PᅟySide6.QtMultimedia.QMediaRecorder.quality: Quality#

Returns the recording quality.

Access functions:

quality ()
setQuality (quality)
Signal qualityChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.recorderState: RecorderState#

This property holds The current state of the media recorder..

The state property represents the user request and is changed synchronously during record() , pause() or stop() calls. Recorder state may also change asynchronously when recording fails.

Access functions:

recorderState ()
Signal recorderStateChanged (state)

property PᅟySide6.QtMultimedia.QMediaRecorder.videoBitRate: int#

Access functions:

videoBitRate ()
setVideoBitRate (bitRate)
Signal videoBitRateChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.videoFrameRate: float#

Access functions:

videoFrameRate ()
setVideoFrameRate (frameRate)
Signal videoFrameRateChanged ()

property PᅟySide6.QtMultimedia.QMediaRecorder.videoResolution: PySide6.QtCore.QSize#

Access functions:

videoResolution ()
setVideoResolution (arg__1)
Signal videoResolutionChanged ()

PySide6.QtMultimedia.QMediaRecorder.Quality#

Enumerates quality encoding levels.

Constant

Description

QMediaRecorder.VeryLowQuality

QMediaRecorder.LowQuality

QMediaRecorder.NormalQuality

QMediaRecorder.HighQuality

QMediaRecorder.VeryHighQuality

Constant	Description
QMediaRecorder.VeryLowQuality
QMediaRecorder.LowQuality
QMediaRecorder.NormalQuality
QMediaRecorder.HighQuality
QMediaRecorder.VeryHighQuality

New in version 6.1.

PySide6.QtMultimedia.QMediaRecorder.EncodingMode#

Enumerates encoding modes.

Constant

Description

QMediaRecorder.ConstantQualityEncoding

Encoding will aim to have a constant quality, adjusting bitrate to fit.

QMediaRecorder.ConstantBitRateEncoding

Encoding will use a constant bit rate, adjust quality to fit.

QMediaRecorder.AverageBitRateEncoding

Encoding will try to keep an average bitrate setting, but will use more or less as needed.

QMediaRecorder.TwoPassEncoding

The media will first be processed to determine the characteristics, and then processed a second time allocating more bits to the areas that need it.

Constant	Description
QMediaRecorder.ConstantQualityEncoding	Encoding will aim to have a constant quality, adjusting bitrate to fit.
QMediaRecorder.ConstantBitRateEncoding	Encoding will use a constant bit rate, adjust quality to fit.
QMediaRecorder.AverageBitRateEncoding	Encoding will try to keep an average bitrate setting, but will use more or less as needed.
QMediaRecorder.TwoPassEncoding	The media will first be processed to determine the characteristics, and then processed a second time allocating more bits to the areas that need it.

New in version 6.1.

PySide6.QtMultimedia.QMediaRecorder.RecorderState#

Constant	Description
QMediaRecorder.StoppedState	The recorder is not active.
QMediaRecorder.RecordingState	The recording is requested.
QMediaRecorder.PausedState	The recorder is paused.

New in version 6.1.

PySide6.QtMultimedia.QMediaRecorder.Error#

Constant	Description
QMediaRecorder.NoError	No Errors.
QMediaRecorder.ResourceError	Device is not ready or not available.
QMediaRecorder.FormatError	Current format is not supported.
QMediaRecorder.OutOfSpaceError	No space left on device.
QMediaRecorder.LocationNotWritable	The output location is not writable.

New in version 6.1.

PySide6.QtMultimedia.QMediaRecorder.actualLocation()#

Return type:: PySide6.QtCore.QUrl

Getter of property actualLocation .

PySide6.QtMultimedia.QMediaRecorder.actualLocationChanged(location)#

Parameters:: location – PySide6.QtCore.QUrl

Signals that the actual location of the recorded media has changed. This signal is usually emitted when recording starts.

Notification signal of property actualLocation .

PySide6.QtMultimedia.QMediaRecorder.addMetaData(metaData)#

Parameters:: metaData – PySide6.QtMultimedia.QMediaMetaData

Adds metaData to the recorded media.

PySide6.QtMultimedia.QMediaRecorder.audioBitRate()#

Return type:: int

Returns the bit rate of the compressed audio stream in bits per second.

See also

setAudioBitRate()

Getter of property audioBitRate .

PySide6.QtMultimedia.QMediaRecorder.audioBitRateChanged()#

Signals when the recording audio bit rate changes.

Notification signal of property audioBitRate .

PySide6.QtMultimedia.QMediaRecorder.audioChannelCount()#

Return type:: int

Returns the number of audio channels.

See also

setAudioChannelCount()

Getter of property audioChannelCount .

PySide6.QtMultimedia.QMediaRecorder.audioChannelCountChanged()#

Signals when the recording audio channel count changes.

Notification signal of property audioChannelCount .

PySide6.QtMultimedia.QMediaRecorder.audioSampleRate()#

Return type:: int

Returns the audio sample rate in Hz.

See also

setAudioSampleRate()

Getter of property audioSampleRate .

PySide6.QtMultimedia.QMediaRecorder.audioSampleRateChanged()#

Signals when the recording audio sample rate changes.

Notification signal of property audioSampleRate .

PySide6.QtMultimedia.QMediaRecorder.captureSession()#

Return type:: PySide6.QtMultimedia.QMediaCaptureSession

Returns the media capture session.

PySide6.QtMultimedia.QMediaRecorder.duration()#

Return type:: int

Getter of property duration .

PySide6.QtMultimedia.QMediaRecorder.durationChanged(duration)#

Parameters:: duration – int

Signals that the duration of the recorded media has changed.

Notification signal of property duration .

PySide6.QtMultimedia.QMediaRecorder.encoderSettingsChanged()#

Signals when the encoder settings change.

PySide6.QtMultimedia.QMediaRecorder.encodingMode()#

Return type:: EncodingMode

Returns the encoding mode.

See also

setEncodingMode() EncodingMode

Getter of property encodingMode .

PySide6.QtMultimedia.QMediaRecorder.encodingModeChanged()#

Signals when the encoding mode changes.

Notification signal of property encodingMode .

PySide6.QtMultimedia.QMediaRecorder.error()#

Return type:: Error

Getter of property error .

PySide6.QtMultimedia.QMediaRecorder.errorChanged()#

Notification signal of property error .

PySide6.QtMultimedia.QMediaRecorder.errorOccurred(error, errorString)#

Parameters:

error – Error
errorString – str

Signals that an error has occurred, with errorString containing a description of the error.

PySide6.QtMultimedia.QMediaRecorder.errorString()#

Return type:: str

Getter of property errorString .

PySide6.QtMultimedia.QMediaRecorder.isAvailable()#

Return type:: bool

Returns true if media recorder service ready to use.

PySide6.QtMultimedia.QMediaRecorder.mediaFormat()#

Return type:: PySide6.QtMultimedia.QMediaFormat

See also

setMediaFormat()

Getter of property mediaFormat .

PySide6.QtMultimedia.QMediaRecorder.mediaFormatChanged()#

Notification signal of property mediaFormat .

PySide6.QtMultimedia.QMediaRecorder.metaData()#

Return type:: PySide6.QtMultimedia.QMediaMetaData

See also

setMetaData()

Getter of property metaData .

PySide6.QtMultimedia.QMediaRecorder.metaDataChanged()#

Signals that a media object’s meta-data has changed.

If multiple meta-data elements are changed metaDataChanged() is emitted once.

Notification signal of property metaData .

PySide6.QtMultimedia.QMediaRecorder.outputLocation()#

Return type:: PySide6.QtCore.QUrl

See also

setOutputLocation()

Getter of property outputLocation .

PySide6.QtMultimedia.QMediaRecorder.pause()#

Pauses recording.

The recorder state is changed to PausedState .

Depending on the platform, pausing recording may be not supported. In this case the recorder state is unchanged.

PySide6.QtMultimedia.QMediaRecorder.quality()#

Return type:: Quality

See also

setQuality()

Getter of property quality .

PySide6.QtMultimedia.QMediaRecorder.qualityChanged()#

Signals when the recording quality changes.

Notification signal of property quality .

PySide6.QtMultimedia.QMediaRecorder.record()#

Start recording.

While the recorder state is changed immediately to c{ RecordingState }, recording may start asynchronously.

If recording fails error() signal is emitted with recorder state being reset back to QMediaRecorder::StoppedState.

Note

On mobile devices, recording will happen in the orientation the device had when calling record and is locked for the duration of the recording. To avoid artifacts on the user interface, we recommend to keep the user interface locked to the same orientation as long as the recording is ongoing using the contentOrientation property of QWindow and unlock it again once the recording is finished.

PySide6.QtMultimedia.QMediaRecorder.recorderState()#

Return type:: RecorderState

Returns the current media recorder state.

See also

RecorderState

Getter of property recorderState .

PySide6.QtMultimedia.QMediaRecorder.recorderStateChanged(state)#

Parameters:: state – RecorderState

Signals that a media recorder’s state has changed.

Notification signal of property recorderState .

PySide6.QtMultimedia.QMediaRecorder.setAudioBitRate(bitRate)#

Parameters:: bitRate – int

Sets the audio bitRate in bits per second.

See also

audioBitRate()

Setter of property audioBitRate .

PySide6.QtMultimedia.QMediaRecorder.setAudioChannelCount(channels)#

Parameters:: channels – int

Sets the number of audio channels.

A value of -1 indicates the recorder should make an optimal choice based on what is available from the audio source and the limitations of the codec.

See also

audioChannelCount()

Setter of property audioChannelCount .

PySide6.QtMultimedia.QMediaRecorder.setAudioSampleRate(sampleRate)#

Parameters:: sampleRate – int

Sets the audio sampleRate in Hz.

A value of -1 indicates the recorder should make an optimal choice based on what is available from the audio source, and the limitations of the codec.

See also

audioSampleRate()

Setter of property audioSampleRate .

PySide6.QtMultimedia.QMediaRecorder.setEncodingMode(arg__1)#

Parameters:: arg__1 – EncodingMode

Sets the encoding mode setting.

If ConstantQualityEncoding is set, the quality encoding parameter is used and bit rates are ignored, otherwise the bitrates are used.

See also

encodingMode() EncodingMode

Setter of property encodingMode .

PySide6.QtMultimedia.QMediaRecorder.setMediaFormat(format)#

Parameters:: format – PySide6.QtMultimedia.QMediaFormat

See also

mediaFormat()

Setter of property mediaFormat .

PySide6.QtMultimedia.QMediaRecorder.setMetaData(metaData)#

Parameters:: metaData – PySide6.QtMultimedia.QMediaMetaData

Sets the meta data to metaData.

Note

To ensure that meta-data is set correctly, it should be set before starting the recording. Once the recording is started, any meta-data set will be attached to the next recording.

See also

metaData()

Setter of property metaData .

PySide6.QtMultimedia.QMediaRecorder.setOutputLocation(location)#

Parameters:: location – PySide6.QtCore.QUrl

See also

outputLocation()

Setter of property outputLocation .

PySide6.QtMultimedia.QMediaRecorder.setQuality(quality)#

Parameters:: quality – Quality

See also

quality()

Setter of property quality .

PySide6.QtMultimedia.QMediaRecorder.setVideoBitRate(bitRate)#

Parameters:: bitRate – int

Sets the video bitRate in bits per second.

See also

videoBitRate()

Setter of property videoBitRate .

PySide6.QtMultimedia.QMediaRecorder.setVideoFrameRate(frameRate)#

Parameters:: frameRate – float

Sets the video frameRate.

A value of 0 indicates the recorder should make an optimal choice based on what is available from the video source and the limitations of the codec.

See also

videoFrameRate()

Setter of property videoFrameRate .

PySide6.QtMultimedia.QMediaRecorder.setVideoResolution(arg__1)#

Parameters:: arg__1 – PySide6.QtCore.QSize

Sets the resolution of the encoded video to size.

Pass an empty QSize to make the recorder choose an optimal resolution based on what is available from the video source and the limitations of the codec.

See also

videoResolution()

Setter of property videoResolution .

PySide6.QtMultimedia.QMediaRecorder.setVideoResolution(width, height)

Parameters:

width – int
height – int

Sets the width and height of the resolution of the encoded video.

This is an overloaded function.

PySide6.QtMultimedia.QMediaRecorder.stop()#

The recorder will stop the recording. Processing pending video and audio data might however still take some time. The recording is finished, once the state of the media recorder changes to StoppedState .

PySide6.QtMultimedia.QMediaRecorder.videoBitRate()#

Return type:: int

Returns the bit rate of the compressed video stream in bits per second.

See also

setVideoBitRate()

Getter of property videoBitRate .

PySide6.QtMultimedia.QMediaRecorder.videoBitRateChanged()#

Signals when the recording video bit rate changes.

Notification signal of property videoBitRate .

PySide6.QtMultimedia.QMediaRecorder.videoFrameRate()#

Return type:: float

Returns the video frame rate.

See also

setVideoFrameRate()

Getter of property videoFrameRate .

PySide6.QtMultimedia.QMediaRecorder.videoFrameRateChanged()#

Signals when the recording video frame rate changes.

Notification signal of property videoFrameRate .

PySide6.QtMultimedia.QMediaRecorder.videoResolution()#

Return type:: PySide6.QtCore.QSize

Returns the resolution of the encoded video.

See also

setVideoResolution()

Getter of property videoResolution .

PySide6.QtMultimedia.QMediaRecorder.videoResolutionChanged()#

Signals when the video recording resolution changes.

Notification signal of property videoResolution .