En esta página

Qt Graphs Migración desde Qt Charts

La API y la funcionalidad entre Qt Charts y Qt Graphs difieren ligeramente. Este artículo explica las diferencias entre la API de ambos: Qt Charts y Qt Graphs:

Declaración de importación de QML

La instrucción de importación en Qt Charts:

import QtCharts

debe cambiarse por:

import QtGraphs

para Qt Graphs.

Inclusión del módulo CMake

La inclusión en Qt Charts:

find_package(Qt6 REQUIRED COMPONENTS Charts)
target_link_libraries(mytarget PRIVATE Qt6::Charts)

debe cambiarse a:

find_package(Qt6 REQUIRED COMPONENTS Graphs)
target_link_libraries(mytarget PRIVATE Qt6::Graphs)

para Qt Graphs.

Inclusión del módulo Qmake

La inclusión en Qt Charts:

QT += charts

debe modificarse a:

QT += graphs

para Qt Graphs.

Funcionalidades que faltan en Qt Graphs

Estas características no están disponibles en Qt Graphs en la versión 6.8:

  • Qt Graphs Widgets
  • Gráficos de velas
  • Gráfico de caja y bigotes
  • Títulos y leyendas
  • Eje de valores logarítmicos
  • Vista de gráfico polar

API de temas

La configuración de temas entre gráficos 2D y 3D está unificada; para ver los ajustes de temas, consulta GraphsTheme.

La combinación de colores genérica de todo el gráfico se controla ahora mediante la propiedad color scheme, y los colores de las series mediante la propiedad theme. Si no se establece explícitamente una combinación de colores, se utilizará la temática del escritorio (clara/oscura).

Enumeraciones

En Qt Graphs 2D, todas las enumeraciones se implementan como enumeraciones con ámbito; por ejemplo, para la propiedad PieSlice.LabelOutside en Qt Charts, la enumeración correspondiente en Qt Graphs 2D es PieSlice.LabelPosition.Outside.

Migración de series de gráficos en QML

En esta sección se ofrecen ejemplos de cómo migrar tu código de Qt Charts a Qt Graphs 2D.

Migración de series de área

Estos ejemplos de código implementan gráficos similares:

Con Qt Charts:

ChartView {
    anchors.fill: parent
    ValueAxis {
        id: valueAxisX
        max: 8
    }

    ValueAxis {
        id: valueAxisY
        max: 4
    }

    AreaSeries {
        axisX: valueAxisX
        axisY: valueAxisY
        upperSeries: LineSeries {
            XYPoint { x: 0; y: 2 }
            XYPoint { x: 1; y: 3.5 }
            XYPoint { x: 2; y: 3.8 }
        }
        lowerSeries: LineSeries {
            XYPoint { x: 0.4; y: 1.5 }
            XYPoint { x: 1; y: 2.5 }
            XYPoint { x: 2.4; y: 3 }
        }
    }
}

Con « Qt Graphs »:

GraphsView {
    anchors.fill: parent
    axisX: ValueAxis {
        id: xAxis
        max: 8
        tickInterval: 2.0
    }

    axisY: ValueAxis {
        id: yAxis
        max: 4
        tickInterval: 1.0
    }

    AreaSeries {
        upperSeries: LineSeries {
            XYPoint { x: 0; y: 2 }
            XYPoint { x: 1; y: 3.5 }
            XYPoint { x: 2; y: 3.8 }
        }

        lowerSeries: LineSeries {
            XYPoint { x: 0.4; y: 1.5 }
            XYPoint { x: 1; y: 2.5 }
            XYPoint { x: 2.4; y: 3 }
        }
    }
}

Migración de la serie de barras

Con Qt Charts:

import QtQuick
import QtCharts

ChartView {
    BarSeries {
        id: mySeries
        axisX: BarCategoryAxis { categories: ["2007", "2008", "2009", "2010", "2011", "2012" ] }
        BarSet { label: "Bob"; values: [2, 2, 3, 4, 5, 6] }
        BarSet { label: "Susan"; values: [5, 1, 2, 4, 1, 7] }
        BarSet { label: "James"; values: [3, 5, 8, 13, 5, 8] }
    }
}

Con Qt Graphs:

GraphsView {
    axisX: BarCategoryAxis { categories: ["2007", "2008", "2009", "2010", "2011", "2012" ] }

    BarSeries {
        id: mySeries
        BarSet { label: "Bob"; values: [2, 2, 3, 4, 5, 6] }
        BarSet { label: "Susan"; values: [5, 1, 2, 4, 1, 7] }
        BarSet { label: "James"; values: [3, 5, 8, 13, 5, 8] }
    }
}

Migración de la serie Donut

Con Qt Charts:

import QtQuick
import QtCharts

ChartView {
    PieSeries {
        id: pieOuter
        size: 0.96
        holeSize: 0.7
        PieSlice { id: slice; label: "Alpha"; value: 19511; color: "#99CA53" }
        PieSlice { label: "Epsilon"; value: 11105; color: "#209FDF" }
        PieSlice { label: "Psi"; value: 9352; color: "#F6A625" }
    }

    PieSeries {
        id: pieInner
        size: 0.7
        holeSize: 0.25

        PieSlice { label: "Materials"; value: 10334; color: "#B9DB8A" }
        PieSlice { label: "Employee"; value: 3066; color: "#DCEDC4" }
        PieSlice { label: "Logistics"; value: 6111; color: "#F3F9EB" }

        PieSlice { label: "Materials"; value: 7371; color: "#63BCE9" }
        PieSlice { label: "Employee"; value: 2443; color: "#A6D9F2" }
        PieSlice { label: "Logistics"; value: 1291; color: "#E9F5FC" }

        PieSlice { label: "Materials"; value: 4022; color: "#F9C36C" }
        PieSlice { label: "Employee"; value: 3998; color: "#FCE1B6" }
        PieSlice { label: "Logistics"; value: 1332; color: "#FEF5E7" }
    }

    Component.onCompleted: {
        // Set the common slice properties dynamically for convenience
        for (var i = 0; i < pieOuter.count; i++) {
            pieOuter.at(i).labelPosition = PieSlice.LabelOutside;
            pieOuter.at(i).labelVisible = true;
            pieOuter.at(i).borderWidth = 3;
        }
        for (var i = 0; i < pieInner.count; i++) {
            pieInner.at(i).labelPosition = PieSlice.LabelInsideNormal;
            pieInner.at(i).labelVisible = true;
            pieInner.at(i).borderWidth = 2;
        }
    }
}

Con « Qt Graphs »:

GraphsView {
    PieSeries {
        id: pieOuter
        pieSize: 0.96
        holeSize: 0.7
        PieSlice { id: slice; label: "Alpha"; value: 19511; color: "#99CA53" }
        PieSlice { label: "Epsilon"; value: 11105; color: "#209FDF" }
        PieSlice { label: "Psi"; value: 9352; color: "#F6A625" }
    }

    PieSeries {
        id: pieInner
        pieSize: 0.7
        holeSize: 0.25

        PieSlice { label: "Materials"; value: 10334; color: "#B9DB8A" }
        PieSlice { label: "Employee"; value: 3066; color: "#DCEDC4" }
        PieSlice { label: "Logistics"; value: 6111; color: "#F3F9EB" }

        PieSlice { label: "Materials"; value: 7371; color: "#63BCE9" }
        PieSlice { label: "Employee"; value: 2443; color: "#A6D9F2" }
        PieSlice { label: "Logistics"; value: 1291; color: "#E9F5FC" }

        PieSlice { label: "Materials"; value: 4022; color: "#F9C36C" }
        PieSlice { label: "Employee"; value: 3998; color: "#FCE1B6" }
        PieSlice { label: "Logistics"; value: 1332; color: "#FEF5E7" }
    }

    Component.onCompleted: {
        // Set the common slice properties dynamically for convenience
        for (var i = 0; i < pieOuter.count; i++) {
            pieOuter.at(i).labelPosition = PieSlice.LabelPosition.Outside;
            pieOuter.at(i).labelVisible = true;
            pieOuter.at(i).borderWidth = 3;
        }
        for (var i = 0; i < pieInner.count; i++) {
            pieInner.at(i).labelPosition = PieSlice.LabelPosition.InsideNormal;
            pieInner.at(i).labelVisible = true;
            pieInner.at(i).borderWidth = 2;
        }
    }
}

Migración de la serie Line

Con Qt Charts:

ChartView {
    LineSeries {
        XYPoint { x: 0; y: 0 }
        XYPoint { x: 1.1; y: 2.1 }
        XYPoint { x: 1.9; y: 3.3 }
        XYPoint { x: 2.1; y: 2.1 }
        XYPoint { x: 2.9; y: 4.9 }
        XYPoint { x: 3.4; y: 3.0 }
        XYPoint { x: 4.1; y: 3.3 }
    }
}

Con Qt Graphs:

GraphsView {
    // Graphs don't calculate a visible range for axes.
    // You should define the visible range explicitly.
    axisX: ValueAxis {
        id: xAxis
        max: 4.1
    }
    axisY: ValueAxis {
        id: yAxis
        max: 4.9
    }

    LineSeries {
        XYPoint { x: 0; y: 0 }
        XYPoint { x: 1.1; y: 2.1 }
        XYPoint { x: 1.9; y: 3.3 }
        XYPoint { x: 2.1; y: 2.1 }
        XYPoint { x: 2.9; y: 4.9 }
        XYPoint { x: 3.4; y: 3.0 }
        XYPoint { x: 4.1; y: 3.3 }
    }
}

Migración de la serie «Pie»

Con Qt Charts:

ChartView {
    property variant othersSlice: 0

    PieSeries {
        id: pieSeries
        PieSlice { label: "Volkswagen"; value: 13.5 }
        PieSlice { label: "Toyota"; value: 10.9 }
        PieSlice { label: "Ford"; value: 8.6 }
        PieSlice { label: "Skoda"; value: 8.2 }
        PieSlice { label: "Volvo"; value: 6.8 }
    }

    Component.onCompleted: {
        othersSlice = pieSeries.append("Others", 52.0);
        pieSeries.find("Volkswagen").exploded = true;
    }
}

Con « Qt Graphs »:

GraphsView {
    property variant othersSlice: 0

    PieSeries {
        id: pieSeries
        PieSlice { label: "Volkswagen"; value: 13.5 }
        PieSlice { label: "Toyota"; value: 10.9 }
        PieSlice { label: "Ford"; value: 8.6 }
        PieSlice { label: "Skoda"; value: 8.2 }
        PieSlice { label: "Volvo"; value: 6.8 }
    }

    Component.onCompleted: {
        othersSlice = pieSeries.append("Others", 52.0);
        pieSeries.find("Volkswagen").exploded = true;
    }
}

Migración de la serie Scatter

Con Qt Charts:

ChartView {
    ScatterSeries {
        XYPoint { x: 1.5; y: 1.5 }
        XYPoint { x: 1.5; y: 1.6 }
        XYPoint { x: 1.57; y: 1.55 }
        XYPoint { x: 1.8; y: 1.8 }
        XYPoint { x: 1.9; y: 1.6 }
        XYPoint { x: 2.1; y: 1.3 }
        XYPoint { x: 2.5; y: 2.1 }
    }
}

Con Qt Graphs:

GraphsView {
    // Graphs don't calculate a visible range for axes.
    // You should define the visible range explicitly.
    ValueAxis {
        id: xyAxis
        min: 1.3
        max: 2.5
    }
    axisX: xyAxis
    axisY: xyAxis

    ScatterSeries {
        XYPoint { x: 1.5; y: 1.5 }
        XYPoint { x: 1.5; y: 1.6 }
        XYPoint { x: 1.57; y: 1.55 }
        XYPoint { x: 1.8; y: 1.8 }
        XYPoint { x: 1.9; y: 1.6 }
        XYPoint { x: 2.1; y: 1.3 }
        XYPoint { x: 2.5; y: 2.1 }
    }
}

Migración de series Spline

Con « Qt Charts »:

ChartView {
    SplineSeries {
        name: "Spline"
        XYPoint { x: 0; y: 0.0 }
        XYPoint { x: 1.1; y: 3.2 }
        XYPoint { x: 1.9; y: 2.4 }
        XYPoint { x: 2.1; y: 2.1 }
        XYPoint { x: 2.9; y: 2.6 }
        XYPoint { x: 3.4; y: 2.3 }
        XYPoint { x: 4.1; y: 3.1 }
    }
}

Con Qt Graphs:

GraphsView {
    ValueAxis {
        id: xyAxis
        max: 5
    }
    axisX: xyAxis
    axisY: xyAxis
    SplineSeries {
        XYPoint { x: 0; y: 0.0 }
        XYPoint { x: 1.1; y: 3.2 }
        XYPoint { x: 1.9; y: 2.4 }
        XYPoint { x: 2.1; y: 2.1 }
        XYPoint { x: 2.9; y: 2.6 }
        XYPoint { x: 3.4; y: 2.3 }
        XYPoint { x: 4.1; y: 3.1 }
    }
}

© 2026 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.