PathView QML Type

These properties set the preferred range of the highlight (current item) within the view. The preferred values must be in the range from 0 to 1.

Valid values for highlightRangeMode are:

The default value is PathView.StrictlyEnforceRange.

Defining a highlight range is the correct way to influence where the current item ends up when the view moves. For example, if you want the currently selected item to be in the middle of the path, then set the highlight range to be 0.5,0.5 and highlightRangeMode to PathView.StrictlyEnforceRange. Then, when the path scrolls, the currently selected item will be the item at that position. This also applies to when the currently selected item changes - it will scroll to within the preferred highlight range. Furthermore, the behaviour of the current item index will occur whether or not a highlight exists.

This property holds the maximum number of items to cache off the path.

For example, a PathView with a model containing 20 items, a pathItemCount of 10, and an cacheItemCount of 4 will create up to 14 items, with 10 visible on the path and 4 invisible cached items.

The cached delegates are created asynchronously, allowing creation to occur across multiple frames and reducing the likelihood of skipping frames.

See also pathItemCount.

This property holds the number of items in the model.

This property holds the index of the current item.

This property holds the current item in the view.

The delegate provides a template defining each item instantiated by the view. The index is exposed as an accessible index property. Properties of the model are also available depending upon the type of Data Model.

The number of objects and bindings in the delegate has a direct effect on the flicking performance of the view when pathItemCount is specified. If at all possible, place functionality that is not needed for the normal display of the delegate in a Loader which can load additional components when needed.

Note that the PathView will layout the items based on the size of the root item in the delegate.

Here is an example delegate:

    Component {
        id: delegate
        Column {
            id: wrapper

            required property url icon
            required property string name

            opacity: PathView.isCurrentItem ? 1 : 0.5

            Image {
                anchors.horizontalCenter: nameText.horizontalCenter
                width: 64; height: 64
                source: wrapper.icon
            }
            Text {
                id: nameText
                text: wrapper.name
                font.pointSize: 16
            }
        }
    }

This property holds the maximum distance from the path that initiates mouse dragging.

By default the path can only be dragged by clicking on an item. If dragMargin is greater than zero, a drag can be initiated by clicking within dragMargin pixels of the path.

This property holds whether the view is currently moving due to the user dragging the view.

This property holds the rate at which a flick will decelerate.

The default is 100.

This property holds whether the view is currently moving due to the user flicking the view.

This property holds the component to use as the highlight.

An instance of the highlight component will be created for each view. The geometry of the resultant component instance will be managed by the view so as to stay with the current item.

The below example demonstrates how to make a simple highlight. Note the use of the PathView.onPath attached property to ensure that the highlight is hidden when flicked away from the path.

Component {
    Rectangle {
        visible: PathView.onPath
        // ...
    }
}

See also highlightItem and highlightRangeMode.

highlightItem holds the highlight item, which was created from the highlight component.

See also highlight.

This property holds the move animation duration of the highlight delegate.

If the highlightRangeMode is StrictlyEnforceRange then this property determines the speed that the items move along the path.

The default value for the duration is 300ms.

A user cannot drag or flick a PathView that is not interactive.

This property is useful for temporarily disabling flicking. This allows special interaction with PathView's children.

This property holds the approximate maximum velocity that the user can flick the view in pixels/second.

The default value is platform dependent.

This property holds the model providing data for the view.

The model provides a set of data that is used to create the items for the view. For large or dynamic datasets the model is usually provided by a C++ model object. Models can also be created directly in QML, using the ListModel type.

See also Data Models.

This property determines the direction in which items move when setting the current index. The possible values are:

For example, suppose that there are 5 items in the model, and currentIndex is 0. If currentIndex is set to 2,

• a Positive movement direction will result in the following order: 0, 1, 2
• a Negative movement direction will result in the following order: 0, 5, 4, 3, 2
• a Shortest movement direction will result in same order with Positive .

This property holds whether the view is currently moving due to the user either dragging or flicking the view.

The offset specifies how far along the path the items are from their initial positions. This is a real number that ranges from 0 to the count of items in the model.

This property holds the path used to lay out the items. For more information see the Path documentation.

This property holds the number of items visible on the path at any one time.

Setting pathItemCount to undefined will show all items on the path.

This property determines how the items will settle following a drag or flick. The possible values are:

snapMode does not affect the currentIndex. To update the currentIndex as the view is moved, set highlightRangeMode to PathView.StrictlyEnforceRange (default for PathView).

See also highlightRangeMode.

This attached property is true if this delegate is the current item; otherwise false.

It is attached to each instance of the delegate.

This property may be used to adjust the appearance of the current item.

    Component {
        id: delegate
        Column {
            id: wrapper

            required property url icon
            required property string name

            opacity: PathView.isCurrentItem ? 1 : 0.5

            Image {
                anchors.horizontalCenter: nameText.horizontalCenter
                width: 64; height: 64
                source: wrapper.icon
            }
            Text {
                id: nameText
                text: wrapper.name
                font.pointSize: 16
            }
        }
    }

This attached property holds whether the item is currently on the path.

If a pathItemCount has been set, it is possible that some items may be instantiated, but not considered to be currently on the path. Usually, these items would be set invisible, for example:

Component {
    Rectangle {
        visible: PathView.onPath
        // ...
    }
}

It is attached to each instance of the delegate.

This attached property holds the view that manages this delegate instance.

It is attached to each instance of the delegate.

This signal is emitted when the user stops dragging the view.

If the velocity of the drag is suffient at the time the touch/mouse button is released then a flick will start.

This signal is emitted when the view starts to be dragged due to user interaction.

This signal is emitted when the view stops moving due to a flick.

This signal is emitted when the view is flicked. A flick starts from the point that the mouse or touch is released, while still in motion.

This signal is emitted when the view stops moving due to user interaction. If a flick was generated, this signal will be emitted once the flick stops. If a flick was not generated, this signal will be emitted when the user stops dragging - i.e. a mouse or touch release.

This signal is emitted when the view begins moving due to user interaction.

Decrements the current index.

Note: methods should only be called after the Component has completed.

Increments the current index.

Note: methods should only be called after the Component has completed.

Returns the index of the item containing the point x, y in content coordinates. If there is no item at the point specified, -1 is returned.

Note: methods should only be called after the Component has completed.

Returns the item containing the point x, y in content coordinates. If there is no item at the point specified, null is returned.

Note: methods should only be called after the Component has completed.

Returns the item for index. If there is no item for that index, for example because it has not been created yet, or because it has been panned out of the visible area and removed from the cache, null is returned.

Note: this method should only be called after the Component has completed. The returned value should also not be stored since it can turn to null as soon as control goes out of the calling scope, if the view releases that item.

Positions the view such that the index is at the position specified by mode:

Note: methods should only be called after the Component has completed. To position the view at startup, this method should be called by Component.onCompleted. For example, to position the view at the end:

Component.onCompleted: positionViewAtIndex(count - 1, PathView.End)