Qt

The Qt namespace contains miscellaneous identifiers used throughout the Qt library. More…

Synopsis

Static functions

• def bin (s)

• def bom (s)

• def center (s)

• def dec (s)

• def endl (s)

• def fixed (s)

• def flush (s)

• def forcepoint (s)

• def forcesign (s)

• def hex (s)

• def left (s)

• def lowercasebase (s)

• def lowercasedigits (s)

• def noforcepoint (s)

• def noforcesign (s)

• def noshowbase (s)

• def oct (s)

• def reset (s)

• def right (s)

• def scientific (s)

• def showbase (s)

• def uppercasebase (s)

• def uppercasedigits (s)

• def ws (s)

Detailed Description

PySide2.QtCore.Qt.GlobalColor

Qt’s predefined QColor objects:

Constant	Description
Qt.white	White (#ffffff)
Qt.black	Black (#000000)
Qt.red	Red (#ff0000)
Qt.darkRed	Dark red (#800000)
Qt.green	Green (#00ff00)
Qt.darkGreen	Dark green (#008000)
Qt.blue	Blue (#0000ff)
Qt.darkBlue	Dark blue (#000080)
Qt.cyan	Cyan (#00ffff)
Qt.darkCyan	Dark cyan (#008080)
Qt.magenta	Magenta (#ff00ff)
Qt.darkMagenta	Dark magenta (#800080)
Qt.yellow	Yellow (#ffff00)
Qt.darkYellow	Dark yellow (#808000)
Qt.gray	Gray (#a0a0a4)
Qt.darkGray	Dark gray (#808080)
Qt.lightGray	Light gray (#c0c0c0)
Qt.transparent	a transparent black value (i.e., QColor (0, 0, 0, 0))
Qt.color0	0 pixel value (for bitmaps)
Qt.color1	1 pixel value (for bitmaps)

See also

QColor

PySide2.QtCore.Qt.KeyboardModifier

This enum describes the modifier keys.

Constant	Description
Qt.NoModifier	No modifier key is pressed.
Qt.ShiftModifier	A Shift key on the keyboard is pressed.
Qt.ControlModifier	A Ctrl key on the keyboard is pressed.
Qt.AltModifier	An Alt key on the keyboard is pressed.
Qt.MetaModifier	A Meta key on the keyboard is pressed.
Qt.KeypadModifier	A keypad button is pressed.
Qt.GroupSwitchModifier	X11 only (unless activated on Windows by a command line argument). A Mode_switch key on the keyboard is pressed.

Note

On macOS, the ControlModifier value corresponds to the Command keys on the keyboard, and the MetaModifier value corresponds to the Control keys. The KeypadModifier value will also be set when an arrow key is pressed as the arrow keys are considered part of the keypad.

Note

On Windows Keyboards, and Key_Meta are mapped to the Windows key.

See also

MouseButton Modifier

PySide2.QtCore.Qt.Modifier

This enum provides shorter names for the keyboard modifier keys supported by Qt.

Note

On macOS, the CTRL value corresponds to the Command keys on the keyboard, and the META value corresponds to the Control keys.

Constant	Description
Qt.SHIFT	The Shift keys provided on all standard keyboards.
Qt.META	The Meta keys.
Qt.CTRL	The Ctrl keys.
Qt.ALT	The normal Alt keys, but not keys like AltGr.
Qt.UNICODE_ACCEL	The shortcut is specified as a Unicode code point, not as a Qt Key.

See also

KeyboardModifier MouseButton

PySide2.QtCore.Qt.MouseButton

This enum type describes the different mouse buttons.

Constant	Description
Qt.NoButton	The button state does not refer to any button (see button() ).
Qt.AllButtons	This value corresponds to a mask of all possible mouse buttons. Use to set the ‘acceptedButtons’ property of a MouseArea to accept ALL mouse buttons.
Qt.LeftButton	The left button is pressed, or an event refers to the left button. (The left button may be the right button on left-handed mice.)
Qt.RightButton	The right button.
Qt.MiddleButton	The middle button.
Qt.BackButton	The ‘Back’ button. (Typically present on the ‘thumb’ side of a mouse with extra buttons. This is NOT the tilt wheel.)
Qt.XButton1	The ‘Back’ Button.
Qt.ExtraButton1	The ‘Back’ Button.
Qt.ForwardButton	The ‘Forward’ Button. (Typically present beside the ‘Back’ button, and also pressed by the thumb.)
Qt.XButton2	The ‘Forward Button.
Qt.ExtraButton2	The ‘Forward’ Button.
Qt.TaskButton	The ‘Task’ Button.
Qt.ExtraButton3	The ‘Task’ Button.
Qt.ExtraButton4	The 7th non-wheel Mouse Button.
Qt.ExtraButton5	The 8th non-wheel Mouse Button.
Qt.ExtraButton6	The 9th non-wheel Mouse Button.
Qt.ExtraButton7	The 10th non-wheel Mouse Button.
Qt.ExtraButton8	The 11th non-wheel Mouse Button.
Qt.ExtraButton9	The 12th non-wheel Mouse Button.
Qt.ExtraButton10	The 13th non-wheel Mouse Button.
Qt.ExtraButton11	The 14th non-wheel Mouse Button.
Qt.ExtraButton12	The 15th non-wheel Mouse Button.
Qt.ExtraButton13	The 16th non-wheel Mouse Button.
Qt.ExtraButton14	The 17th non-wheel Mouse Button.
Qt.ExtraButton15	The 18th non-wheel Mouse Button.
Qt.ExtraButton16	The 19th non-wheel Mouse Button.
Qt.ExtraButton17	The 20th non-wheel Mouse Button.
Qt.ExtraButton18	The 21st non-wheel Mouse Button.
Qt.ExtraButton19	The 22nd non-wheel Mouse Button.
Qt.ExtraButton20	The 23rd non-wheel Mouse Button.
Qt.ExtraButton21	The 24th non-wheel Mouse Button.
Qt.ExtraButton22	The 25th non-wheel Mouse Button.
Qt.ExtraButton23	The 26th non-wheel Mouse Button.
Qt.ExtraButton24	The 27th non-wheel Mouse Button.

Note

Some models of multi-button mice are pre-configured with high-numbered Buttons emulating keyboard sequences, for use in specific games. In order for these Buttons to be seen as actual ‘Mouse Buttons’, the device must be re-configured (using the vendor’s configuration tool).

See also

KeyboardModifier Modifier

PySide2.QtCore.Qt.Orientation

This type is used to signify an object’s orientation.

Constant	Description
Qt.Horizontal
Qt.Vertical

Orientation is used with QScrollBar for example.

PySide2.QtCore.Qt.FocusPolicy

This enum type defines the various policies a widget can have with respect to acquiring keyboard focus.

Constant	Description
Qt.TabFocus	the widget accepts focus by tabbing.
Qt.ClickFocus	the widget accepts focus by clicking.
Qt.StrongFocus	the widget accepts focus by both tabbing and clicking. On macOS this will also be indicate that the widget accepts tab focus when in ‘Text/List focus mode’.
Qt.WheelFocus	like plus the widget accepts focus by using the mouse wheel.
Qt.NoFocus	the widget does not accept focus.

PySide2.QtCore.Qt.TabFocusBehavior

This enum type provides different focus behaviors for tab navigation.

Constant	Description
Qt.NoTabFocus	iterate nothing.
Qt.TabFocusTextControls	iterate text controls and widgets.
Qt.TabFocusListControls	iterate list controls and widgets.
Qt.TabFocusAllControls	iterate all controls and widgets.

New in version 5.5.

PySide2.QtCore.Qt.SortOrder

This enum describes how the items in a widget are sorted.

Constant	Description
Qt.AscendingOrder	The items are sorted ascending e.g. starts with ‘AAA’ ends with ‘ZZZ’ in Latin-1 locales
Qt.DescendingOrder	The items are sorted descending e.g. starts with ‘ZZZ’ ends with ‘AAA’ in Latin-1 locales

PySide2.QtCore.Qt.SplitBehaviorFlags

This enum specifies how the split() functions should behave with respect to empty strings.

Constant	Description
Qt.KeepEmptyParts	If a field is empty, keep it in the result.
Qt.SkipEmptyParts	If a field is empty, don’t include it in the result.

See also

split()

New in version 5.14.

PySide2.QtCore.Qt.TileRule

This enum describes how to repeat or stretch the parts of an image when drawing.

Constant	Description
Qt.StretchTile	Scale the image to fit to the available area.
Qt.RepeatTile	Repeat the image until there is no more space. May crop the last image.
Qt.RoundTile	Similar to Repeat, but scales the image down to ensure that the last tile is not cropped.

New in version 4.6.

PySide2.QtCore.Qt.AlignmentFlag

This enum type is used to describe alignment. It contains horizontal and vertical flags that can be combined to produce the required effect.

The TextElideMode enum can also be used in many situations to fine-tune the appearance of aligned text.

The horizontal flags are:

Constant	Description
Qt.AlignLeft	Aligns with the left edge.
Qt.AlignRight	Aligns with the right edge.
Qt.AlignHCenter	Centers horizontally in the available space.
Qt.AlignJustify	Justifies the text in the available space.

The vertical flags are:

Constant	Description
Qt.AlignTop	Aligns with the top.
Qt.AlignBottom	Aligns with the bottom.
Qt.AlignVCenter	Centers vertically in the available space.
Qt.AlignBaseline	Aligns with the baseline.

You can use only one of the horizontal flags at a time. There is one two-dimensional flag:

Constant	Description
Qt.AlignCenter	Centers in both dimensions.

You can use at most one horizontal and one vertical flag at a time. counts as both horizontal and vertical.

Three enum values are useful in applications that can be run in right-to-left mode:

Constant	Description
Qt.AlignAbsolute	If the widget’s layout direction is RightToLeft (instead of LeftToRight , the default), refers to the right edge and to the left edge. This is normally the desired behavior. If you want to always mean “left” and to always mean “right”, combine the flag with .
Qt.AlignLeading	Synonym for .
Qt.AlignTrailing	Synonym for .

Masks:

Constant	Description
Qt.AlignHorizontal_Mask
Qt.AlignVertical_Mask

Conflicting combinations of flags have undefined meanings.

PySide2.QtCore.Qt.TextFlag

This enum type is used to define some modifier flags. Some of these flags only make sense in the context of printing:

Constant	Description
Qt.TextSingleLine	Treats all whitespace as spaces and prints just one line.
Qt.TextDontClip	If it’s impossible to stay within the given bounds, it prints outside.
Qt.TextExpandTabs	Makes the U+0009 (ASCII tab) character move to the next tab stop.
Qt.TextShowMnemonic	Displays the string “&P” as P For an ampersand, use “&&”.
Qt.TextWordWrap	Breaks lines at appropriate points, e.g. at word boundaries.
Qt.TextWrapAnywhere	Breaks lines anywhere, even within words.
Qt.TextHideMnemonic	Same as but doesn’t draw the underlines.
Qt.TextDontPrint	Treat this text as “hidden” and don’t print it.
Qt.TextIncludeTrailingSpaces	When this option is set, naturalTextWidth() and naturalTextRect() will return a value that includes the width of trailing spaces in the text; otherwise this width is excluded.
Qt.TextJustificationForced	Ensures that text lines are justified.

You can use as many modifier flags as you want, except that and cannot be combined.

Flags that are inappropriate for a given use are generally ignored.

PySide2.QtCore.Qt.TextElideMode

This enum specifies where the ellipsis should appear when displaying texts that don’t fit:

Constant	Description
Qt.ElideLeft	The ellipsis should appear at the beginning of the text.
Qt.ElideRight	The ellipsis should appear at the end of the text.
Qt.ElideMiddle	The ellipsis should appear in the middle of the text.
Qt.ElideNone	Ellipsis should NOT appear in the text.

is normally the most appropriate choice for URLs (e.g., “ http://bugreports.qt…/QTWEBSITE-13/ “), whereas is appropriate for other strings (e.g., “ Deploying Applications on Ma… “).

See also

textElideMode elidedText() AlignmentFlag elideMode

PySide2.QtCore.Qt.WhiteSpaceMode

This enum describes the types of whitespace mode that are used by the QTextDocument class to meet the requirements of different kinds of textual information.

Constant	Description
Qt.WhiteSpaceNormal	The whitespace mode used to display normal word wrapped text in paragraphs.
Qt.WhiteSpacePre	A preformatted text mode in which whitespace is reproduced exactly.
Qt.WhiteSpaceNoWrap

PySide2.QtCore.Qt.HitTestAccuracy

This enum contains the types of accuracy that can be used by the QTextDocument class when testing for mouse clicks on text documents.

Constant	Description
Qt.ExactHit	The point at which input occurred must coincide exactly with input-sensitive parts of the document.
Qt.FuzzyHit	The point at which input occurred can lie close to input-sensitive parts of the document.

PySide2.QtCore.Qt.WindowType

This enum type is used to specify various window-system properties for the widget. They are fairly unusual but necessary in a few cases. Some of these flags depend on whether the underlying window manager supports them.

The main types are

Constant	Description
Qt.Widget	This is the default type for QWidget . Widgets of this type are child widgets if they have a parent, and independent windows if they have no parent. See also and .
Qt.Window	Indicates that the widget is a window, usually with a window system frame and a title bar, irrespective of whether the widget has a parent or not. Note that it is not possible to unset this flag if the widget does not have a parent.
Qt.Dialog	Indicates that the widget is a window that should be decorated as a dialog (i.e., typically no maximize or minimize buttons in the title bar). This is the default type for QDialog . If you want to use it as a modal dialog, it should be launched from another window, or have a parent and used with the windowModality property. If you make it modal, the dialog will prevent other top-level windows in the application from getting any input. We refer to a top-level window that has a parent as a secondary window.
Qt.Sheet	Indicates that the window is a sheet on macOS. Since using a sheet implies window modality, the recommended way is to use setWindowModality() , or open() , instead.
Qt.Drawer	Indicates that the widget is a drawer on macOS. This feature is obsolete. Setting the flag has no effect.
Qt.Popup	Indicates that the widget is a pop-up top-level window, i.e. that it is modal, but has a window system frame appropriate for pop-up menus.
Qt.Tool	Indicates that the widget is a tool window. A tool window is often a small window with a smaller than usual title bar and decoration, typically used for collections of tool buttons. If there is a parent, the tool window will always be kept on top of it. If there isn’t a parent, you may consider using as well. If the window system supports it, a tool window can be decorated with a somewhat lighter frame. It can also be combined with . On macOS, tool windows correspond to the NSPanel class of windows. This means that the window lives on a level above normal windows making it impossible to put a normal window on top of it. By default, tool windows will disappear when the application is inactive. This can be controlled by the WA_MacAlwaysShowToolWindow attribute.
Qt.ToolTip	Indicates that the widget is a tooltip. This is used internally to implement tooltips .
Qt.SplashScreen	Indicates that the window is a splash screen. This is the default type for QSplashScreen .
Qt.Desktop	Indicates that this widget is the desktop. This is the type for QDesktopWidget .
Qt.SubWindow	Indicates that this widget is a sub-window, such as a QMdiSubWindow widget.
Qt.ForeignWindow	Indicates that this window object is a handle representing a native platform window created by another process or by manually using native code.
Qt.CoverWindow	Indicates that the window represents a cover window, which is shown when the application is minimized on some platforms.

There are also a number of flags which you can use to customize the appearance of top-level windows. These have no effect on other windows:

Constant	Description
Qt.MSWindowsFixedSizeDialogHint	Gives the window a thin dialog border on Windows. This style is traditionally used for fixed-size dialogs.

Note

The use of this flag is not recommended in multi-monitor environments. This is because the system will enforce that the window maintains its native size when moving it across screens. This is particularly undesirable when using monitors with different resolutions.

Constant	Description
Qt.MSWindowsOwnDC	Gives the window its own display context on Windows.
Qt.BypassWindowManagerHint	This flag can be used to indicate to the platform plugin that “all” window manager protocols should be disabled. This flag will behave different depending on what operating system the application is running on and what window manager is running. The flag can be used to get a native window with no configuration set.
Qt.X11BypassWindowManagerHint	Bypass the window manager completely. This results in a borderless window that is not managed at all (i.e., no keyboard input unless you call activateWindow() manually).
Qt.FramelessWindowHint	Produces a borderless window. The user cannot move or resize a borderless window via the window system. On X11, the result of the flag is dependent on the window manager and its ability to understand Motif and/or NETWM hints. Most existing modern window managers can handle this.
Qt.NoDropShadowWindowHint	Disables window drop shadow on supporting platforms.

The CustomizeWindowHint flag is used to enable customization of the window controls. This flag must be set to allow the WindowTitleHint , WindowSystemMenuHint , WindowMinimizeButtonHint , WindowMaximizeButtonHint and WindowCloseButtonHint flags to be changed.

Constant	Description
Qt.CustomizeWindowHint	Turns off the default window title hints.
Qt.WindowTitleHint	Gives the window a title bar.
Qt.WindowSystemMenuHint	Adds a window system menu, and possibly a close button (for example on Mac). If you need to hide or show a close button, it is more portable to use WindowCloseButtonHint.
Qt.WindowMinimizeButtonHint	Adds a minimize button. On some platforms this implies for it to work.
Qt.WindowMaximizeButtonHint	Adds a maximize button. On some platforms this implies for it to work.
Qt.WindowMinMaxButtonsHint	Adds a minimize and a maximize button. On some platforms this implies for it to work.
Qt.WindowCloseButtonHint	Adds a close button. On some platforms this implies for it to work.
Qt.WindowContextHelpButtonHint	Adds a context help button to dialogs. On some platforms this implies for it to work.
Qt.MacWindowToolBarButtonHint	On macOS adds a tool bar button (i.e., the oblong button that is on the top right of windows that have toolbars).
Qt.WindowFullscreenButtonHint	On macOS adds a fullscreen button.
Qt.BypassGraphicsProxyWidget	Prevents the window and its children from automatically embedding themselves into a QGraphicsProxyWidget if the parent widget is already embedded. You can set this flag if you want your widget to always be a toplevel widget on the desktop, regardless of whether the parent widget is embedded in a scene or not.
Qt.WindowShadeButtonHint	Adds a shade button in place of the minimize button if the underlying window manager supports it.
Qt.WindowStaysOnTopHint	Informs the window system that the window should stay on top of all other windows. Note that on some window managers on X11 you also have to pass for this flag to work correctly.
Qt.WindowStaysOnBottomHint	Informs the window system that the window should stay on bottom of all other windows.

Note

On X11, this hint will work only in window managers that support _NET_WM_STATE_BELOW atom. If a window always on the bottom has a parent, the parent will also be left on the bottom. This window hint is currently not implemented for macOS.

Note

On Windows, this will work only for frameless or full-screen windows.

Constant	Description
Qt.WindowTransparentForInput	Informs the window system that this window is used only for output (displaying something) and does not take input. Therefore input events should pass through as if it wasn’t there.
Qt.WindowOverridesSystemGestures	Informs the window system that this window implements its own set of gestures and that system level gestures, like for instance three-finger desktop switching, should be disabled.
Qt.WindowDoesNotAcceptFocus	Informs the window system that this window should not receive the input focus.
Qt.MaximizeUsingFullscreenGeometryHint	Informs the window system that when maximizing the window it should use as much of the available screen geometry as possible, including areas that may be covered by system UI such as status bars or application launchers. This may result in the window being placed under these system UIs, but does not guarantee it, depending on whether or not the platform supports it. When the flag is enabled the user is responsible for taking availableGeometry() into account, so that any UI elements in the application that require user interaction are not covered by system UI.
Qt.WindowType_Mask	A mask for extracting the window type part of the window flags.

See also

windowFlags Window Flags Example

PySide2.QtCore.Qt.WindowState

This enum type is used to specify the current state of a top-level window.

The states are

Constant	Description
Qt.WindowNoState	The window has no state set (in normal state).
Qt.WindowMinimized	The window is minimized (i.e. iconified).
Qt.WindowMaximized	The window is maximized with a frame around it.
Qt.WindowFullScreen	The window fills the entire screen without any frame around it.
Qt.WindowActive	The window is the active window, i.e. it has keyboard focus.

PySide2.QtCore.Qt.ApplicationState

This enum type is used to specify the current state of the application.

The states are

Constant	Description
Qt.ApplicationSuspended	The application is about to suspend. When entering this state, the application should save its state, cease all activities, and be prepared for code execution to stop. While suspended, the application can be killed at any time without further warnings (e.g. when low memory forces the OS to purge suspended applications).
Qt.ApplicationHidden	The application is hidden and runs in the background. This is the normal state for applications that need to do background processing, like playing music, while the user interacts with other applications. The application should free up all graphical resources when entering this state.
Qt.ApplicationInactive	The application is visible, but not selected to be in front. On desktop platforms, this typically means that the user activated another application. On mobile platforms, it is more common to enter this state when the OS is interrupting the user with e.g. incoming calls or SMS-messages. While in this state, consider reducing CPU-intensive tasks.
Qt.ApplicationActive	The application is visible and selected to be in front.

New in version 5.1.

PySide2.QtCore.Qt.ScreenOrientation

This enum type specifies the various orientations a screen might have.

Constant	Description
Qt.PrimaryOrientation	The display’s primary orientation.
Qt.LandscapeOrientation	Landscape orientation, display width is greater than display height.
Qt.PortraitOrientation	Portrait orientation, display height is greater than display width, rotated 90 degree clockwise relative to landscape.
Qt.InvertedLandscapeOrientation	Inverted landscape orientation, rotated 180 degrees relative to landscape.
Qt.InvertedPortraitOrientation	Inverted portrait orientation, rotated 180 degrees relative to portrait.

New in version 5.0.

PySide2.QtCore.Qt.WidgetAttribute

This enum type is used to specify various widget attributes. Attributes are set and cleared with setAttribute() , and queried with testAttribute() , although some have special convenience functions which are mentioned below.

Constant	Description
Qt.WA_AcceptDrops	Allows data from drag and drop operations to be dropped onto the widget (see setAcceptDrops() ).
Qt.WA_AlwaysShowToolTips	Enables tooltips for inactive windows.
Qt.WA_ContentsPropagated	This flag is superfluous and obsolete; it no longer has any effect. Since Qt 4.1, all widgets that do not set propagate their contents.
Qt.WA_CustomWhatsThis	Indicates that the widget wants to continue operating normally in “What’s This?” mode. This is set by the widget’s author.
Qt.WA_DeleteOnClose	Makes Qt delete this widget when the widget has accepted the close event (see closeEvent() ).
Qt.WA_Disabled	Indicates that the widget is disabled, i.e. it does not receive any mouse or keyboard events. There is also a getter functions isEnabled() . This is set/cleared by the Qt kernel.
Qt.WA_DontShowOnScreen	Indicates that the widget is hidden or is not a part of the viewable Desktop.
Qt.WA_ForceDisabled	Indicates that the widget is explicitly disabled, i.e. it will remain disabled even when all its ancestors are set to the enabled state. This implies . This is set/cleared by setEnabled() and setDisabled() .
Qt.WA_ForceUpdatesDisabled	Indicates that updates are explicitly disabled for the widget; i.e. it will remain disabled even when all its ancestors are set to the updates-enabled state. This implies . This is set/cleared by setUpdatesEnabled() .
Qt.WA_GroupLeader	This attribute has been deprecated. Use windowModality instead.
Qt.WA_Hover	Forces Qt to generate paint events when the mouse enters or leaves the widget. This feature is typically used when implementing custom styles; see the Styles example for details.
Qt.WA_InputMethodEnabled	Enables input methods for Asian languages. Must be set when creating custom text editing widgets.
Qt.WA_KeyboardFocusChange	Set on a toplevel window when the users changes focus with the keyboard (tab, backtab, or shortcut).
Qt.WA_KeyCompression	Enables key event compression if set, and disables it if not set. By default key compression is off, so widgets receive one key press event for each key press (or more, since autorepeat is usually on). If you turn it on and your program doesn’t keep up with key input, Qt may try to compress key events so that more than one character can be processed in each event. For example, a word processor widget might receive 2, 3 or more characters in each text() , if the layout recalculation takes too long for the CPU. If a widget supports multiple character unicode input, it is always safe to turn the compression on. Qt performs key event compression only for printable characters. Modifier keys, cursor movement keys, function keys and miscellaneous action keys (e.g. Escape, Enter, Backspace, PrintScreen) will stop key event compression, even if there are more compressible key events available. Platforms other than Mac and X11 do not support this compression, in which case turning it on will have no effect. This is set/cleared by the widget’s author.
Qt.WA_LayoutOnEntireRect	Indicates that the widget wants QLayout to operate on the entire rect() , not only on contentsRect() . This is set by the widget’s author.
Qt.WA_LayoutUsesWidgetRect	Ignore the layout item rect from the style when laying out this widget with QLayout .
Qt.WA_MacNoClickThrough	This value is obsolete and has no effect.
Qt.WA_MacOpaqueSizeGrip	Indicates that the native size grip should be opaque instead of transparent (the default). This attribute is only applicable to macOS and is set by the widget’s author.
Qt.WA_MacShowFocusRect	Indicates that this widget should get a QFocusFrame around it. Some widgets draw their own focus halo regardless of this attribute. Not that the focusPolicy also plays the main role in whether something is given focus or not, this only controls whether or not this gets the focus frame. This attribute is only applicable to macOS.
Qt.WA_MacNormalSize	Indicates the widget should have the normal size for widgets in macOS. This attribute is only applicable to macOS.
Qt.WA_MacSmallSize	Indicates the widget should have the small size for widgets in macOS. This attribute is only applicable to macOS.
Qt.WA_MacMiniSize	Indicates the widget should have the mini size for widgets in macOS. This attribute is only applicable to macOS.
Qt.WA_MacVariableSize	Indicates the widget can choose between alternative sizes for widgets to avoid clipping. This attribute is only applicable to macOS.
Qt.WA_MacBrushedMetal	This value is obsolete and has no effect.
Qt.WA_Mapped	Indicates that the widget is mapped on screen. This is set/cleared by the Qt kernel.
Qt.WA_MouseNoMask	Makes the widget receive mouse events for the entire widget regardless of the currently set mask, overriding setMask() . This is not applicable for top-level windows.
Qt.WA_MouseTracking	Indicates that the widget has mouse tracking enabled. See mouseTracking .
Qt.WA_Moved	Indicates that the widget has an explicit position. This is set/cleared by move() and by setGeometry() .
Qt.WA_MSWindowsUseDirect3D	This value is obsolete and has no effect.
Qt.WA_NoBackground	This value is obsolete. Use instead.
Qt.WA_NoChildEventsForParent	Indicates that the widget does not want ChildAdded or ChildRemoved events sent to its parent. This is rarely necessary but can help to avoid automatic insertion widgets like splitters and layouts. This is set by a widget’s author.
Qt.WA_NoChildEventsFromChildren	Indicates that the widget does not want to receive ChildAdded or ChildRemoved events sent from its children. This is set by a widget’s author.
Qt.WA_NoMouseReplay	Used for pop-up widgets. Indicates that the most recent mouse press event should not be replayed when the pop-up widget closes. The flag is set by the widget’s author and cleared by the Qt kernel every time the widget receives a new mouse event.
Qt.WA_NoMousePropagation	Prohibits mouse events from being propagated to the widget’s parent. This attribute is disabled by default.
Qt.WA_TransparentForMouseEvents	When enabled, this attribute disables the delivery of mouse events to the widget and its children. Mouse events are delivered to other widgets as if the widget and its children were not present in the widget hierarchy; mouse clicks and other events effectively “pass through” them. This attribute is disabled by default.
Qt.WA_NoSystemBackground	Indicates that the widget has no background, i.e. when the widget receives paint events, the background is not automatically repainted. Note: Unlike , newly exposed areas are never filled with the background (e.g., after showing a window for the first time the user can see “through” it until the application processes the paint events). This flag is set or cleared by the widget’s author.
Qt.WA_OpaquePaintEvent	Indicates that the widget paints all its pixels when it receives a paint event. Thus, it is not required for operations like updating, resizing, scrolling and focus changes to erase the widget before generating paint events. The use of provides a small optimization by helping to reduce flicker on systems that do not support double buffering and avoiding computational cycles necessary to erase the background prior to painting. Note: Unlike , makes an effort to avoid transparent window backgrounds. This flag is set or cleared by the widget’s author.
Qt.WA_OutsideWSRange	Indicates that the widget is outside the valid range of the window system’s coordinate system. A widget outside the valid range cannot be mapped on screen. This is set/cleared by the Qt kernel.
Qt.WA_PaintOnScreen	Indicates that the widget wants to draw directly onto the screen. Widgets with this attribute set do not participate in composition management, i.e. they cannot be semi-transparent or shine through semi-transparent overlapping widgets. Note: This flag is only supported on X11 and it disables double buffering. On Qt for Embedded Linux, the flag only works when set on a top-level widget and it relies on support from the active screen driver. This flag is set or cleared by the widget’s author. To render outside of Qt’s paint system, e.g., if you require native painting primitives, you need to reimplement paintEngine() to return 0 and set this flag.
Qt.WA_PaintUnclipped	Makes all painters operating on this widget unclipped. Children of this widget or other widgets in front of it do not clip the area the painter can paint on. This flag is only supported for widgets with the flag set. The preferred way to do this in a cross platform way is to create a transparent widget that lies in front of the other widgets.
Qt.WA_PendingMoveEvent	Indicates that a move event is pending, e.g., when a hidden widget was moved. This flag is set or cleared by the Qt kernel.
Qt.WA_PendingResizeEvent	Indicates that a resize event is pending, e.g., when a hidden widget was resized. This flag is set or cleared by the Qt kernel.
Qt.WA_QuitOnClose	Makes Qt quit the application when the last widget with the attribute set has accepted closeEvent(). This behavior can be modified with the quitOnLastWindowClosed property. By default this attribute is set for all widgets of type Window .
Qt.WA_Resized	Indicates that the widget has an explicit size. This flag is set or cleared by resize() and setGeometry() .
Qt.WA_RightToLeft	Indicates that the layout direction for the widget is right to left.
Qt.WA_SetCursor	Indicates that the widget has a cursor of its own. This flag is set or cleared by setCursor() and unsetCursor() .
Qt.WA_SetFont	Indicates that the widget has a font of its own. This flag is set or cleared by setFont() .
Qt.WA_SetPalette	Indicates that the widget has a palette of its own. This flag is set or cleared by setPalette() .
Qt.WA_SetStyle	Indicates that the widget has a style of its own. This flag is set or cleared by setStyle() .
Qt.WA_ShowModal	This attribute has been deprecated. Use windowModality instead.
Qt.WA_StaticContents	Indicates that the widget contents are north-west aligned and static. On resize, such a widget will receive paint events only for parts of itself that are newly visible. This flag is set or cleared by the widget’s author.
Qt.WA_StyleSheet	Indicates that the widget is styled using a style sheet . is set whenever a widget is subject to a style sheet, even if the style sheet did not affect the widget appearance.
Qt.WA_StyleSheetTarget	Indicates that the widget appearance was modified by a style sheet . will also be set. This value was introduced in Qt 5.12.
Qt.WA_TabletTracking	Indicates that the widget has tablet tracking enabled. See tabletTracking .
Qt.WA_TranslucentBackground	Indicates that the widget should have a translucent background, i.e., any non-opaque regions of the widgets will be translucent because the widget will have an alpha channel. Setting this flag causes to be set. On Windows the widget also needs the FramelessWindowHint window flag to be set. This flag is set or cleared by the widget’s author.
Qt.WA_UnderMouse	Indicates that the widget is under the mouse cursor. The value is not updated correctly during drag and drop operations. There is also a getter function, underMouse() . This flag is set or cleared by the Qt kernel.
Qt.WA_UpdatesDisabled	Indicates that updates are blocked (including the system background). This flag is set or cleared by the Qt kernel. Warning: This flag must never be set or cleared by the widget’s author.
Qt.WA_WindowModified	Indicates that the window is marked as modified. On some platforms this flag will do nothing, on others (including macOS and Windows) the window will take a modified appearance. This flag is set or cleared by setWindowModified() .
Qt.WA_WindowPropagation	Makes a toplevel window inherit font, palette and locale from its parent.
Qt.WA_MacAlwaysShowToolWindow	On macOS, show the tool window even when the application is not active. By default, all tool windows are hidden when the application is inactive.
Qt.WA_SetLocale	Indicates the locale should be taken into consideration in the widget.
Qt.WA_StyledBackground	Indicates the widget should be drawn using a styled background.
Qt.WA_ShowWithoutActivating	Show the widget without making it active.
Qt.WA_NativeWindow	Indicates that a native window is created for the widget. Enabling this flag will also force a native window for the widget’s ancestors unless is set.
Qt.WA_DontCreateNativeAncestors	Indicates that the widget’s ancestors are kept non-native even though the widget itself is native.
Qt.WA_X11NetWmWindowTypeDesktop	Adds _NET_WM_WINDOW_TYPE_DESKTOP to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms.
Qt.WA_X11NetWmWindowTypeDock	Adds _NET_WM_WINDOW_TYPE_DOCK to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms.
Qt.WA_X11NetWmWindowTypeToolBar	Adds _NET_WM_WINDOW_TYPE_TOOLBAR to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for QToolBar .
Qt.WA_X11NetWmWindowTypeMenu	Adds _NET_WM_WINDOW_TYPE_MENU to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for QMenu when torn-off.
Qt.WA_X11NetWmWindowTypeUtility	Adds _NET_WM_WINDOW_TYPE_UTILITY to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for the Tool window type.
Qt.WA_X11NetWmWindowTypeSplash	Adds _NET_WM_WINDOW_TYPE_SPLASH to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for the SplashScreen window type.
Qt.WA_X11NetWmWindowTypeDialog	Adds _NET_WM_WINDOW_TYPE_DIALOG to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for the Dialog and Sheet window types.
Qt.WA_X11NetWmWindowTypeDropDownMenu	Adds _NET_WM_WINDOW_TYPE_DROPDOWN_MENU to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for QMenu objects added to a QMenuBar .
Qt.WA_X11NetWmWindowTypePopupMenu	Adds _NET_WM_WINDOW_TYPE_POPUP_MENU to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for QMenu .
Qt.WA_X11NetWmWindowTypeToolTip	Adds _NET_WM_WINDOW_TYPE_TOOLTIP to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for the ToolTip window type.
Qt.WA_X11NetWmWindowTypeNotification	Adds _NET_WM_WINDOW_TYPE_NOTIFICATION to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms.
Qt.WA_X11NetWmWindowTypeCombo	Adds _NET_WM_WINDOW_TYPE_COMBO to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute for the QComboBox pop-up.
Qt.WA_X11NetWmWindowTypeDND	Adds _NET_WM_WINDOW_TYPE_DND to the window’s _NET_WM_WINDOW_TYPE X11 window property. See http://standards.freedesktop.org/wm-spec/ for more details. This attribute has no effect on non-X11 platforms. Note: Qt automatically sets this attribute on the feedback widget used during a drag.
Qt.WA_MacFrameworkScaled	This value is obsolete and has no effect.
Qt.WA_AcceptTouchEvents	Allows touch events (see QTouchEvent ) to be sent to the widget. Must be set on all widgets that can handle touch events. Without this attribute set, events from a touch device will be sent as mouse events.
Qt.WA_TouchPadAcceptSingleTouchEvents	Allows touchpad single touch events to be sent to the widget.
Qt.WA_X11DoNotAcceptFocus	Asks the window manager to not give focus to this top level window. This attribute has no effect on non-X11 platforms.
Qt.WA_AlwaysStackOnTop	Since Qt 5.4, this value forces QOpenGLWidget and QQuickWidget to be drawn last, on top of other widgets. Ignored for other type of widgets. Setting this attribute breaks the stacking order, but allows having a semi-transparent OpenGL widget with other widgets visible underneath. It is strongly recommended to call update() on the widget’s top-level window after enabling or disabling this attribute.
Qt.WA_ContentsMarginsRespectsSafeArea	A QWidget respects the safe area margins of a window by incorporating the margins into its contents’ margins by default. This means, that a QLayout will use the content area of a widget for its layout, unless the attribute is set. This along with a contents margin of 0 can be used on the actual layout, to allow for example a background image to underlay the status bar and other system areas on an iOS device, while still allowing child widgets of that background to be inset based on the safe area.

PySide2.QtCore.Qt.ApplicationAttribute

This enum describes attributes that change the behavior of application-wide features. These are enabled and disabled using setAttribute() , and can be tested for with testAttribute() .

Constant	Description
Qt.AA_DontShowIconsInMenus	Actions with the Icon property won’t be shown in any menus unless specifically set by the iconVisibleInMenu property. Menus that are currently open or menus already created in the native macOS menubar may not pick up a change in this attribute. Changes in the iconVisibleInMenu property will always be picked up.
Qt.AA_DontShowShortcutsInContextMenus	Actions with the Shortcut property won’t be shown in any shortcut menus unless specifically set by the shortcutVisibleInContextMenu property. This value was added in Qt 5.10, and defaults to the preference reported by the implementation of QPlatformIntegration::styleHint. To override the platform integration, set this attribute after QCoreApplication has been instantiated.
Qt.AA_NativeWindows	Ensures that widgets have native windows.
Qt.AA_DontCreateNativeWidgetSiblings	Ensures that siblings of native widgets stay non-native unless specifically set by the WA_NativeWindow attribute.
Qt.AA_PluginApplication	Indicates that Qt is used to author a plugin. Depending on the operating system, it suppresses specific initializations that do not necessarily make sense in the plugin case. For example on macOS, this includes avoiding loading our nib for the main menu and not taking possession of the native menu bar. Setting this attribute to true will also set the attribute to true. It also disables native event filters. This attribute must be set before QGuiApplication constructed. This value was added in Qt 5.7.
Qt.AA_DontUseNativeMenuBar	All menubars created while this attribute is set to true won’t be used as a native menubar (e.g, the menubar at the top of the main screen on macOS).
Qt.AA_MacDontSwapCtrlAndMeta	On macOS by default, Qt swaps the Control and Meta (Command) keys (i.e., whenever Control is pressed, Qt sends Meta, and whenever Meta is pressed Control is sent). When this attribute is true, Qt will not do the flip. StandardKey will also flip accordingly (i.e., Copy will be Command+C on the keyboard regardless of the value set, though what is output for toString() will be different).
Qt.AA_Use96Dpi	Assume the screen has a resolution of 96 DPI rather than using the OS-provided resolution. This will cause font rendering to be consistent in pixels-per-point across devices rather than defining 1 point as 1/72 inch.
Qt.AA_SynthesizeTouchForUnhandledMouseEvents	All mouse events that are not accepted by the application will be translated to touch events instead.
Qt.AA_SynthesizeMouseForUnhandledTouchEvents	All touch events that are not accepted by the application will be translated to left button mouse events instead. This attribute is enabled by default.
Qt.AA_UseHighDpiPixmaps	Make pixmap() generate high-dpi pixmaps that can be larger than the requested size. Such pixmaps will have devicePixelRatio() set to a value higher than 1. After setting this attribute, application code that uses pixmap sizes in layout geometry calculations should typically divide by devicePixelRatio() to get device-independent layout geometry.
Qt.AA_ForceRasterWidgets	Make top-level widgets use pure raster surfaces, and do not support non-native GL-based child widgets.
Qt.AA_UseDesktopOpenGL	Forces the usage of desktop OpenGL (for example, opengl32.dll or libGL.so) on platforms that use dynamic loading of the OpenGL implementation. This attribute must be set before QGuiApplication is constructed. This value was added in Qt 5.3.
Qt.AA_UseOpenGLES	Forces the usage of OpenGL ES 2.0 or higher on platforms that use dynamic loading of the OpenGL implementation. This attribute must be set before QGuiApplication is constructed. This value was added in Qt 5.3.
Qt.AA_UseSoftwareOpenGL	Forces the usage of a software based OpenGL implementation on platforms that use dynamic loading of the OpenGL implementation. This will typically be a patched build of Mesa llvmpipe , providing OpenGL 2.1. The value may have no effect if no such OpenGL implementation is available. The default name of this library is opengl32sw.dll and can be overridden by setting the environment variable QT_OPENGL_DLL. See the platform-specific pages, for instance Qt for Windows, for more information. This attribute must be set before QGuiApplication is constructed. This value was added in Qt 5.4.
Qt.AA_ShareOpenGLContexts	Enables resource sharing between the OpenGL contexts used by classes like QOpenGLWidget and QQuickWidget . This allows sharing OpenGL resources, like textures, between QOpenGLWidget instances that belong to different top-level windows. This attribute must be set before QGuiApplication is constructed. This value was added in Qt 5.4.
Qt.AA_SetPalette	Indicates whether a palette was explicitly set on the QGuiApplication . This value was added in Qt 5.5.
Qt.AA_EnableHighDpiScaling	Enables high-DPI scaling in Qt on supported platforms (see also High DPI Displays). Supported platforms are X11, Windows and Android. Enabling makes Qt scale the main (device independent) coordinate system according to display scale factors provided by the operating system. This corresponds to setting the QT_AUTO_SCREEN​_SCALE_FACTOR environment variable to 1. This attribute must be set before QGuiApplication is constructed. This value was added in Qt 5.6.
Qt.AA_DisableHighDpiScaling	Disables high-DPI scaling in Qt, exposing window system coordinates. Note that the window system may do its own scaling, so this does not guarantee that devicePixelRatio() will be equal to 1. In addition, scale factors set by QT_SCALE_FACTOR will not be affected. This corresponds to setting the QT_AUTO_SCREEN​_SCALE_FACTOR environment variable to 0. This attribute must be set before QGuiApplication is constructed. This value was added in Qt 5.6.
Qt.AA_UseStyleSheetPropagationInWidgetStyles	By default, Qt Style Sheets disable regular QWidget palette and font propagation. When this flag is enabled, font and palette changes propagate as though the user had manually called the corresponding QWidget methods. See The Style Sheet Syntax - Inheritance for more details. This value was added in Qt 5.7.
Qt.AA_DontUseNativeDialogs	All dialogs created while this attribute is set to true won’t use the native dialogs provided by the platform. This value was added in Qt 5.7.
Qt.AA_SynthesizeMouseForUnhandledTabletEvents	All tablet events that are not accepted by the application will be translated to mouse events instead. This attribute is enabled by default. This value was added in Qt 5.7.
Qt.AA_CompressHighFrequencyEvents	Enables compression of certain frequent events. On the X11 windowing system, the default value is true, which means that MouseMove , TouchUpdate , and changes in window size and position will be combined whenever they occur more frequently than the application handles them, so that they don’t accumulate and overwhelm the application later. On Windows 8 and above the default value is also true, but it only applies to touch events. Mouse and window events remain unaffected by this flag. On other platforms, the default is false. (In the future, the compression feature may be implemented across platforms.) You can test the attribute to see whether compression is enabled. If your application needs to handle all events with no compression, you can unset this attribute. Notice that input events from tablet devices will not be compressed. See if you want these to be compressed as well. This value was added in Qt 5.7.
Qt.AA_CompressTabletEvents	Enables compression of input events from tablet devices. Notice that must be true for events compression to be enabled, and that this flag extends the former to tablet events. Currently supported on the X11 windowing system, Windows 8 and above. The default value is false. This value was added in Qt 5.10.
Qt.AA_DontCheckOpenGLContextThreadAffinity	When making a context current using QOpenGLContext , do not check that the QObject thread affinity of the QOpenGLContext object is the same thread calling makeCurrent() . This value was added in Qt 5.8.
Qt.AA_DisableShaderDiskCache	Disables caching of shader program binaries on disk. By default Qt Quick, QPainter ‘s OpenGL backend, and any application using QOpenGLShaderProgram with one of its addCacheableShaderFromSource overloads will employ a disk-based program binary cache in either the shared or per-process cache storage location, on systems that support glProgramBinary(). In the unlikely event of this being problematic, set this attribute to disable all disk-based caching of shaders.
Qt.AA_DisableWindowContextHelpButton	Disables the WindowContextHelpButtonHint by default on Sheet and Dialog widgets. This hides the ? button on Windows, which only makes sense if you use QWhatsThis functionality. This value was added in Qt 5.10. In Qt 6, WindowContextHelpButtonHint will not be set by default.
Qt.AA_DisableSessionManager	Disables the QSessionManager . By default Qt will connect to a running session manager for a GUI application on supported platforms, use of a session manager may be redundant for system services. This attribute must be set before QGuiApplication is constructed. This value was added in 5.14
Qt.AA_DisableNativeVirtualKeyboard	When this attribute is set, the native on-screen virtual keyboard will not be shown automatically when a text input widget gains focus on a system without a physical keyboard. Currently supported on the Windows platform only. This value was added in 5.15

The following values are deprecated or obsolete:

Constant	Description
Qt.AA_ImmediateWidgetCreation	This attribute is no longer fully supported in Qt 5. It ensures that widgets are created as soon as they are constructed. By default, resources for widgets are allocated on demand to improve efficiency and minimize resource usage. Setting or clearing this attribute affects widgets constructed after the change. Setting it tells Qt to create toplevel windows immediately. Therefore, if it is important to minimize resource consumption, do not set this attribute.
Qt.AA_MacPluginApplication	This attribute has been deprecated. Use instead.
Qt.AA_MSWindowsUseDirect3DByDefault	This value is obsolete and has no effect.
Qt.AA_X11InitThreads	This value is obsolete and has no effect.

PySide2.QtCore.Qt.ImageConversionFlag

The options marked “(default)” are set if no other values from the list are included (since the defaults are zero):

Color/Mono preference (ignored for QBitmap ):

Constant	Description
Qt.AutoColor	(default) - If the image has depth 1 and contains only black and white pixels, the pixmap becomes monochrome.
Qt.ColorOnly	The pixmap is dithered/converted to the native display depth .
Qt.MonoOnly	The pixmap becomes monochrome. If necessary, it is dithered using the chosen dithering algorithm.

Dithering mode preference:

Constant	Description
Qt.DiffuseDither	(default) - A high-quality dither using error diffusion.
Qt.OrderedDither	A faster, ordered dither.
Qt.ThresholdDither	No dithering; closest color is used.

Dithering mode preference for 1-bit alpha masks:

Constant	Description
Qt.ThresholdAlphaDither	(default) - No dithering.
Qt.OrderedAlphaDither	A faster, ordered dither.
Qt.DiffuseAlphaDither	A high-quality dither using error diffusion.

Color matching versus dithering preference:

Constant	Description
Qt.PreferDither	Always dither images when converting to smaller color-spaces.
Qt.AvoidDither	Only dither to indexed formats if the source image uses more different colors than the size of the color table of the destination format.
Qt.AutoDither	(default) - Only dither when down-converting to 1 or 8-bit indexed formats.
Qt.NoOpaqueDetection	Do not check whether the image contains non-opaque pixels. Use this if you know that the image is semi-transparent and you want to avoid the overhead of checking the pixels in the image until a non-opaque pixel is found, or if you want the pixmap to retain an alpha channel for some other reason. If the image has no alpha channel this flag has no effect.
Qt.NoFormatConversion	Don’t do any format conversions on the image. Can be useful when converting a QImage to a QPixmap for a one-time rendering operation for example. Note that a QPixmap not in the preferred format will be much slower as a paint device.

PySide2.QtCore.Qt.BGMode

Background mode:

Constant	Description
Qt.TransparentMode
Qt.OpaqueMode

PySide2.QtCore.Qt.Key

The key names used by Qt.

Constant	Description
Qt.Key_Escape
Qt.Key_Tab
Qt.Key_Backtab
Qt.Key_Backspace
Qt.Key_Return
Qt.Key_Enter	Typically located on the keypad.
Qt.Key_Insert
Qt.Key_Delete
Qt.Key_Pause	The Pause/Break key (Note: Not related to pausing media)
Qt.Key_Print
Qt.Key_SysReq
Qt.Key_Clear	Corresponds to the Clear key on selected Apple keyboard models. On other systems it is commonly mapped to the numeric keypad key 5, when Num Lock is off.
Qt.Key_Home
Qt.Key_End
Qt.Key_Left
Qt.Key_Up
Qt.Key_Right
Qt.Key_Down
Qt.Key_PageUp
Qt.Key_PageDown
Qt.Key_Shift
Qt.Key_Control	On macOS, this corresponds to the Command keys.
Qt.Key_Meta	On macOS, this corresponds to the Control keys. On Windows keyboards, this key is mapped to the Windows key.
Qt.Key_Alt
Qt.Key_AltGr	On Windows, when the KeyDown event for this key is sent, the Ctrl+Alt modifiers are also set.
Qt.Key_CapsLock
Qt.Key_NumLock
Qt.Key_ScrollLock
Qt.Key_F1
Qt.Key_F2
Qt.Key_F3
Qt.Key_F4
Qt.Key_F5
Qt.Key_F6
Qt.Key_F7
Qt.Key_F8
Qt.Key_F9
Qt.Key_F10
Qt.Key_F11
Qt.Key_F12
Qt.Key_F13
Qt.Key_F14
Qt.Key_F15
Qt.Key_F16
Qt.Key_F17
Qt.Key_F18
Qt.Key_F19
Qt.Key_F20
Qt.Key_F21
Qt.Key_F22
Qt.Key_F23
Qt.Key_F24
Qt.Key_F25
Qt.Key_F26
Qt.Key_F27
Qt.Key_F28
Qt.Key_F29
Qt.Key_F30
Qt.Key_F31
Qt.Key_F32
Qt.Key_F33
Qt.Key_F34
Qt.Key_F35
Qt.Key_Super_L
Qt.Key_Super_R
Qt.Key_Menu
Qt.Key_Hyper_L
Qt.Key_Hyper_R
Qt.Key_Help
Qt.Key_Direction_L
Qt.Key_Direction_R
Qt.Key_Space
Qt.Key_Any
Qt.Key_Exclam
Qt.Key_QuoteDbl
Qt.Key_NumberSign
Qt.Key_Dollar
Qt.Key_Percent
Qt.Key_Ampersand
Qt.Key_Apostrophe
Qt.Key_ParenLeft
Qt.Key_ParenRight
Qt.Key_Asterisk
Qt.Key_Plus
Qt.Key_Comma
Qt.Key_Minus
Qt.Key_Period
Qt.Key_Slash
Qt.Key_0
Qt.Key_1
Qt.Key_2
Qt.Key_3
Qt.Key_4
Qt.Key_5
Qt.Key_6
Qt.Key_7
Qt.Key_8
Qt.Key_9
Qt.Key_Colon
Qt.Key_Semicolon
Qt.Key_Less
Qt.Key_Equal
Qt.Key_Greater
Qt.Key_Question
Qt.Key_At
Qt.Key_A
Qt.Key_B
Qt.Key_C
Qt.Key_D
Qt.Key_E
Qt.Key_F
Qt.Key_G
Qt.Key_H
Qt.Key_I
Qt.Key_J
Qt.Key_K
Qt.Key_L
Qt.Key_M
Qt.Key_N
Qt.Key_O
Qt.Key_P
Qt.Key_Q
Qt.Key_R
Qt.Key_S
Qt.Key_T
Qt.Key_U
Qt.Key_V
Qt.Key_W
Qt.Key_X
Qt.Key_Y
Qt.Key_Z
Qt.Key_BracketLeft
Qt.Key_Backslash
Qt.Key_BracketRight
Qt.Key_AsciiCircum
Qt.Key_Underscore
Qt.Key_QuoteLeft
Qt.Key_BraceLeft
Qt.Key_Bar
Qt.Key_BraceRight
Qt.Key_AsciiTilde
Qt.Key_nobreakspace
Qt.Key_exclamdown
Qt.Key_cent
Qt.Key_sterling
Qt.Key_currency
Qt.Key_yen
Qt.Key_brokenbar
Qt.Key_section
Qt.Key_diaeresis
Qt.Key_copyright
Qt.Key_ordfeminine
Qt.Key_guillemotleft
Qt.Key_notsign
Qt.Key_hyphen
Qt.Key_registered
Qt.Key_macron
Qt.Key_degree
Qt.Key_plusminus
Qt.Key_twosuperior
Qt.Key_threesuperior
Qt.Key_acute
Qt.Key_mu
Qt.Key_paragraph
Qt.Key_periodcentered
Qt.Key_cedilla
Qt.Key_onesuperior
Qt.Key_masculine
Qt.Key_guillemotright
Qt.Key_onequarter
Qt.Key_onehalf
Qt.Key_threequarters
Qt.Key_questiondown
Qt.Key_Agrave
Qt.Key_Aacute
Qt.Key_Acircumflex
Qt.Key_Atilde
Qt.Key_Adiaeresis
Qt.Key_Aring
Qt.Key_AE
Qt.Key_Ccedilla
Qt.Key_Egrave
Qt.Key_Eacute
Qt.Key_Ecircumflex
Qt.Key_Ediaeresis
Qt.Key_Igrave
Qt.Key_Iacute
Qt.Key_Icircumflex
Qt.Key_Idiaeresis
Qt.Key_ETH
Qt.Key_Ntilde
Qt.Key_Ograve
Qt.Key_Oacute
Qt.Key_Ocircumflex
Qt.Key_Otilde
Qt.Key_Odiaeresis
Qt.Key_multiply
Qt.Key_Ooblique
Qt.Key_Ugrave
Qt.Key_Uacute
Qt.Key_Ucircumflex
Qt.Key_Udiaeresis
Qt.Key_Yacute
Qt.Key_THORN
Qt.Key_ssharp
Qt.Key_division
Qt.Key_ydiaeresis
Qt.Key_Multi_key
Qt.Key_Codeinput
Qt.Key_SingleCandidate
Qt.Key_MultipleCandidate
Qt.Key_PreviousCandidate
Qt.Key_Mode_switch
Qt.Key_Kanji
Qt.Key_Muhenkan
Qt.Key_Henkan
Qt.Key_Romaji
Qt.Key_Hiragana
Qt.Key_Katakana
Qt.Key_Hiragana_Katakana
Qt.Key_Zenkaku
Qt.Key_Hankaku
Qt.Key_Zenkaku_Hankaku
Qt.Key_Touroku
Qt.Key_Massyo
Qt.Key_Kana_Lock
Qt.Key_Kana_Shift
Qt.Key_Eisu_Shift
Qt.Key_Eisu_toggle
Qt.Key_Hangul
Qt.Key_Hangul_Start
Qt.Key_Hangul_End
Qt.Key_Hangul_Hanja
Qt.Key_Hangul_Jamo
Qt.Key_Hangul_Romaja
Qt.Key_Hangul_Jeonja
Qt.Key_Hangul_Banja
Qt.Key_Hangul_PreHanja
Qt.Key_Hangul_PostHanja
Qt.Key_Hangul_Special
Qt.Key_Dead_Grave
Qt.Key_Dead_Acute
Qt.Key_Dead_Circumflex
Qt.Key_Dead_Tilde
Qt.Key_Dead_Macron
Qt.Key_Dead_Breve
Qt.Key_Dead_Abovedot
Qt.Key_Dead_Diaeresis
Qt.Key_Dead_Abovering
Qt.Key_Dead_Doubleacute
Qt.Key_Dead_Caron
Qt.Key_Dead_Cedilla
Qt.Key_Dead_Ogonek
Qt.Key_Dead_Iota
Qt.Key_Dead_Voiced_Sound
Qt.Key_Dead_Semivoiced_Sound
Qt.Key_Dead_Belowdot
Qt.Key_Dead_Hook
Qt.Key_Dead_Horn
Qt.Key_Dead_Stroke
Qt.Key_Dead_Abovecomma
Qt.Key_Dead_Abovereversedcomma
Qt.Key_Dead_Doublegrave
Qt.Key_Dead_Belowring
Qt.Key_Dead_Belowmacron
Qt.Key_Dead_Belowcircumflex
Qt.Key_Dead_Belowtilde
Qt.Key_Dead_Belowbreve
Qt.Key_Dead_Belowdiaeresis
Qt.Key_Dead_Invertedbreve
Qt.Key_Dead_Belowcomma
Qt.Key_Dead_Currency
Qt.Key_Dead_a
Qt.Key_Dead_A
Qt.Key_Dead_e
Qt.Key_Dead_E
Qt.Key_Dead_i
Qt.Key_Dead_I
Qt.Key_Dead_o
Qt.Key_Dead_O
Qt.Key_Dead_u
Qt.Key_Dead_U
Qt.Key_Dead_Small_Schwa
Qt.Key_Dead_Capital_Schwa
Qt.Key_Dead_Greek
Qt.Key_Dead_Lowline
Qt.Key_Dead_Aboveverticalline
Qt.Key_Dead_Belowverticalline
Qt.Key_Dead_Longsolidusoverlay
Qt.Key_Back
Qt.Key_Forward
Qt.Key_Stop
Qt.Key_Refresh
Qt.Key_VolumeDown
Qt.Key_VolumeMute
Qt.Key_VolumeUp
Qt.Key_BassBoost
Qt.Key_BassUp
Qt.Key_BassDown
Qt.Key_TrebleUp
Qt.Key_TrebleDown
Qt.Key_MediaPlay	A key setting the state of the media player to play
Qt.Key_MediaStop	A key setting the state of the media player to stop
Qt.Key_MediaPrevious
Qt.Key_MediaNext
Qt.Key_MediaRecord
Qt.Key_MediaPause	A key setting the state of the media player to pause (Note: not the pause/break key)
Qt.Key_MediaTogglePlayPause	A key to toggle the play/pause state in the media player (rather than setting an absolute state)
Qt.Key_HomePage
Qt.Key_Favorites
Qt.Key_Search
Qt.Key_Standby
Qt.Key_OpenUrl
Qt.Key_LaunchMail
Qt.Key_LaunchMedia
Qt.Key_Launch0	On X11 this key is mapped to “My Computer” (XF86XK_MyComputer) key for legacy reasons.
Qt.Key_Launch1	On X11 this key is mapped to “Calculator” (XF86XK_Calculator) key for legacy reasons.
Qt.Key_Launch2	On X11 this key is mapped to XF86XK_Launch0 key for legacy reasons.
Qt.Key_Launch3	On X11 this key is mapped to XF86XK_Launch1 key for legacy reasons.
Qt.Key_Launch4	On X11 this key is mapped to XF86XK_Launch2 key for legacy reasons.
Qt.Key_Launch5	On X11 this key is mapped to XF86XK_Launch3 key for legacy reasons.
Qt.Key_Launch6	On X11 this key is mapped to XF86XK_Launch4 key for legacy reasons.
Qt.Key_Launch7	On X11 this key is mapped to XF86XK_Launch5 key for legacy reasons.
Qt.Key_Launch8	On X11 this key is mapped to XF86XK_Launch6 key for legacy reasons.
Qt.Key_Launch9	On X11 this key is mapped to XF86XK_Launch7 key for legacy reasons.
Qt.Key_LaunchA	On X11 this key is mapped to XF86XK_Launch8 key for legacy reasons.
Qt.Key_LaunchB	On X11 this key is mapped to XF86XK_Launch9 key for legacy reasons.
Qt.Key_LaunchC	On X11 this key is mapped to XF86XK_LaunchA key for legacy reasons.
Qt.Key_LaunchD	On X11 this key is mapped to XF86XK_LaunchB key for legacy reasons.
Qt.Key_LaunchE	On X11 this key is mapped to XF86XK_LaunchC key for legacy reasons.
Qt.Key_LaunchF	On X11 this key is mapped to XF86XK_LaunchD key for legacy reasons.
Qt.Key_LaunchG	On X11 this key is mapped to XF86XK_LaunchE key for legacy reasons.
Qt.Key_LaunchH	On X11 this key is mapped to XF86XK_LaunchF key for legacy reasons.
Qt.Key_MonBrightnessUp
Qt.Key_MonBrightnessDown
Qt.Key_KeyboardLightOnOff
Qt.Key_KeyboardBrightnessUp
Qt.Key_KeyboardBrightnessDown
Qt.Key_PowerOff
Qt.Key_WakeUp
Qt.Key_Eject
Qt.Key_ScreenSaver
Qt.Key_WWW
Qt.Key_Memo
Qt.Key_LightBulb
Qt.Key_Shop
Qt.Key_History
Qt.Key_AddFavorite
Qt.Key_HotLinks
Qt.Key_BrightnessAdjust
Qt.Key_Finance
Qt.Key_Community
Qt.Key_AudioRewind
Qt.Key_BackForward
Qt.Key_ApplicationLeft
Qt.Key_ApplicationRight
Qt.Key_Book
Qt.Key_CD
Qt.Key_Calculator	On X11 this key is not mapped for legacy reasons. Use instead.
Qt.Key_ToDoList
Qt.Key_ClearGrab
Qt.Key_Close
Qt.Key_Copy
Qt.Key_Cut
Qt.Key_Display
Qt.Key_DOS
Qt.Key_Documents
Qt.Key_Excel
Qt.Key_Explorer
Qt.Key_Game
Qt.Key_Go
Qt.Key_iTouch
Qt.Key_LogOff
Qt.Key_Market
Qt.Key_Meeting
Qt.Key_MenuKB
Qt.Key_MenuPB
Qt.Key_MySites
Qt.Key_News
Qt.Key_OfficeHome
Qt.Key_Option
Qt.Key_Paste
Qt.Key_Phone
Qt.Key_Calendar
Qt.Key_Reply
Qt.Key_Reload
Qt.Key_RotateWindows
Qt.Key_RotationPB
Qt.Key_RotationKB
Qt.Key_Save
Qt.Key_Send
Qt.Key_Spell
Qt.Key_SplitScreen
Qt.Key_Support
Qt.Key_TaskPane
Qt.Key_Terminal
Qt.Key_Tools
Qt.Key_Travel
Qt.Key_Video
Qt.Key_Word
Qt.Key_Xfer
Qt.Key_ZoomIn
Qt.Key_ZoomOut
Qt.Key_Away
Qt.Key_Messenger
Qt.Key_WebCam
Qt.Key_MailForward
Qt.Key_Pictures
Qt.Key_Music
Qt.Key_Battery
Qt.Key_Bluetooth
Qt.Key_WLAN
Qt.Key_UWB
Qt.Key_AudioForward
Qt.Key_AudioRepeat
Qt.Key_AudioRandomPlay
Qt.Key_Subtitle
Qt.Key_AudioCycleTrack
Qt.Key_Time
Qt.Key_Hibernate
Qt.Key_View
Qt.Key_TopMenu
Qt.Key_PowerDown
Qt.Key_Suspend
Qt.Key_ContrastAdjust
Qt.Key_TouchpadToggle
Qt.Key_TouchpadOn
Qt.Key_TouchpadOff
Qt.Key_MicMute
Qt.Key_Red
Qt.Key_Green
Qt.Key_Yellow
Qt.Key_Blue
Qt.Key_ChannelUp
Qt.Key_ChannelDown
Qt.Key_Guide
Qt.Key_Info
Qt.Key_Settings
Qt.Key_MicVolumeUp
Qt.Key_MicVolumeDown
Qt.Key_New
Qt.Key_Open
Qt.Key_Find
Qt.Key_Undo
Qt.Key_Redo
Qt.Key_MediaLast
Qt.Key_unknown
Qt.Key_Call	A key to answer or initiate a call (see for a key to toggle current call state)
Qt.Key_Camera	A key to activate the camera shutter. On Windows Runtime, the environment variable QT_QPA_ENABLE_CAMERA_KEYS must be set to receive the event.
Qt.Key_CameraFocus	A key to focus the camera. On Windows Runtime, the environment variable QT_QPA_ENABLE_CAMERA_KEYS must be set to receive the event.
Qt.Key_Context1
Qt.Key_Context2
Qt.Key_Context3
Qt.Key_Context4
Qt.Key_Flip
Qt.Key_Hangup	A key to end an ongoing call (see for a key to toggle current call state)
Qt.Key_No
Qt.Key_Select
Qt.Key_Yes
Qt.Key_ToggleCallHangup	A key to toggle the current call state (ie. either answer, or hangup) depending on current call state
Qt.Key_VoiceDial
Qt.Key_LastNumberRedial
Qt.Key_Execute
Qt.Key_Printer
Qt.Key_Play
Qt.Key_Sleep
Qt.Key_Zoom
Qt.Key_Exit
Qt.Key_Cancel

See also

key()

PySide2.QtCore.Qt.ArrowType

Constant	Description
Qt.NoArrow
Qt.UpArrow
Qt.DownArrow
Qt.LeftArrow
Qt.RightArrow

PySide2.QtCore.Qt.PenStyle

This enum type defines the pen styles that can be drawn using QPainter . The styles are:

Constant	Description
Qt.NoPen	no line at all. For example, drawRect() fills but does not draw any boundary line.
Qt.SolidLine	A plain line.
Qt.DashLine	Dashes separated by a few pixels.
Qt.DotLine	Dots separated by a few pixels.
Qt.DashDotLine	Alternate dots and dashes.
Qt.DashDotDotLine	One dash, two dots, one dash, two dots.
Qt.CustomDashLine	A custom pattern defined using setDashPattern() .

See also

QPen

PySide2.QtCore.Qt.PenCapStyle

This enum type defines the pen cap styles supported by Qt, i.e. the line end caps that can be drawn using QPainter .

Constant	Description
Qt.FlatCap	a square line end that does not cover the end point of the line.
Qt.SquareCap	a square line end that covers the end point and extends beyond it by half the line width.
Qt.RoundCap	a rounded line end.

See also

QPen

PySide2.QtCore.Qt.PenJoinStyle

This enum type defines the pen join styles supported by Qt, i.e. which joins between two connected lines can be drawn using QPainter .

Constant	Description
Qt.MiterJoin	The outer edges of the lines are extended to meet at an angle, and this area is filled.
Qt.BevelJoin	The triangular notch between the two lines is filled.
Qt.RoundJoin	A circular arc between the two lines is filled.
Qt.SvgMiterJoin	A miter join corresponding to the definition of a miter join in the SVG 1.2 Tiny specification.

See also

QPen

PySide2.QtCore.Qt.BrushStyle

This enum type defines the brush styles supported by Qt, i.e. the fill pattern of shapes drawn using QPainter .

Constant	Description
Qt.NoBrush	No brush pattern.
Qt.SolidPattern	Uniform color.
Qt.Dense1Pattern	Extremely dense brush pattern.
Qt.Dense2Pattern	Very dense brush pattern.
Qt.Dense3Pattern	Somewhat dense brush pattern.
Qt.Dense4Pattern	Half dense brush pattern.
Qt.Dense5Pattern	Somewhat sparse brush pattern.
Qt.Dense6Pattern	Very sparse brush pattern.
Qt.Dense7Pattern	Extremely sparse brush pattern.
Qt.HorPattern	Horizontal lines.
Qt.VerPattern	Vertical lines.
Qt.CrossPattern	Crossing horizontal and vertical lines.
Qt.BDiagPattern	Backward diagonal lines.
Qt.FDiagPattern	Forward diagonal lines.
Qt.DiagCrossPattern	Crossing diagonal lines.
Qt.LinearGradientPattern	Linear gradient (set using a dedicated QBrush constructor).
Qt.ConicalGradientPattern	Conical gradient (set using a dedicated QBrush constructor).
Qt.RadialGradientPattern	Radial gradient (set using a dedicated QBrush constructor).
Qt.TexturePattern	Custom pattern (see setTexture() ).

See also

QBrush

PySide2.QtCore.Qt.SizeMode

This enum is used by drawRoundedRect() and addRoundedRect() functions to specify the radii of rectangle corners with respect to the dimensions of the bounding rectangles specified.

Constant	Description
Qt.AbsoluteSize	Specifies the size using absolute measurements.
Qt.RelativeSize	Specifies the size relative to the bounding rectangle, typically using percentage measurements.

PySide2.QtCore.Qt.UIEffect

This enum describes the available UI effects.

By default, Qt will try to use the platform specific desktop settings for each effect. Use the setDesktopSettingsAware() function (passing false as argument) to prevent this, and the setEffectEnabled() to enable or disable a particular effect.

Note that all effects are disabled on screens running at less than 16-bit color depth.

Constant	Description
Qt.UI_AnimateMenu	Show animated menus.
Qt.UI_FadeMenu	Show faded menus.
Qt.UI_AnimateCombo	Show animated comboboxes.
Qt.UI_AnimateTooltip	Show tooltip animations.
Qt.UI_FadeTooltip	Show tooltip fading effects.
Qt.UI_AnimateToolBox	Reserved

See also

setEffectEnabled() setDesktopSettingsAware()

PySide2.QtCore.Qt.CursorShape

This enum type defines the various cursors that can be used.

The standard arrow cursor is the default for widgets in a normal state.

Constant	Description
Qt.ArrowCursor	The standard arrow cursor.
Qt.UpArrowCursor	An arrow pointing upwards toward the top of the screen.
Qt.CrossCursor	A crosshair cursor, typically used to help the user accurately select a point on the screen.
Qt.WaitCursor	An hourglass or watch cursor, usually shown during operations that prevent the user from interacting with the application.
Qt.IBeamCursor	A caret or ibeam cursor, indicating that a widget can accept and display text input.
Qt.SizeVerCursor	A cursor used for elements that are used to vertically resize top-level windows.
Qt.SizeHorCursor	A cursor used for elements that are used to horizontally resize top-level windows.
Qt.SizeBDiagCursor	A cursor used for elements that are used to diagonally resize top-level windows at their top-right and bottom-left corners.
Qt.SizeFDiagCursor	A cursor used for elements that are used to diagonally resize top-level windows at their top-left and bottom-right corners.
Qt.SizeAllCursor	A cursor used for elements that are used to resize top-level windows in any direction.
Qt.BlankCursor	A blank/invisible cursor, typically used when the cursor shape needs to be hidden.
Qt.SplitVCursor	A cursor used for vertical splitters, indicating that a handle can be dragged horizontally to adjust the use of available space.
Qt.SplitHCursor	A cursor used for horizontal splitters, indicating that a handle can be dragged vertically to adjust the use of available space.
Qt.PointingHandCursor	A pointing hand cursor that is typically used for clickable elements such as hyperlinks.
Qt.ForbiddenCursor	A slashed circle cursor, typically used during drag and drop operations to indicate that dragged content cannot be dropped on particular widgets or inside certain regions.
Qt.OpenHandCursor	A cursor representing an open hand, typically used to indicate that the area under the cursor is the visible part of a canvas that the user can click and drag in order to scroll around.
Qt.ClosedHandCursor	A cursor representing a closed hand, typically used to indicate that a dragging operation is in progress that involves scrolling.
Qt.WhatsThisCursor	An arrow with a question mark, typically used to indicate the presence of What’s This? help for a widget.
Qt.BusyCursor	An hourglass or watch cursor, usually shown during operations that allow the user to interact with the application while they are performed in the background.
Qt.DragMoveCursor	A cursor that is usually used when dragging an item.
Qt.DragCopyCursor	A cursor that is usually used when dragging an item to copy it.
Qt.DragLinkCursor	A cursor that is usually used when dragging an item to make a link to it.
Qt.BitmapCursor

PySide2.QtCore.Qt.TextFormat

This enum is used in widgets that can display both plain text and rich text, for example QLabel . It is used for deciding whether a text string should be interpreted as one or the other. This is normally done by passing one of the enum values to a QTextEdit::setTextFormat() function.

Constant	Description
Qt.PlainText	The text string is interpreted as a plain text string.
Qt.RichText	The text string is interpreted as a rich text string. See Supported HTML Subset for the definition of rich text.
Qt.AutoText	The text string is interpreted as for if mightBeRichText() returns true, otherwise as .
Qt.MarkdownText	The text string is interpreted as Markdown-formatted text. This enum value was added in Qt 5.14.

PySide2.QtCore.Qt.AspectRatioMode

This enum type defines what happens to the aspect ratio when scaling an rectangle.

Constant	Description
Qt.IgnoreAspectRatio	The size is scaled freely. The aspect ratio is not preserved.
Qt.KeepAspectRatio	The size is scaled to a rectangle as large as possible inside a given rectangle, preserving the aspect ratio.
Qt.KeepAspectRatioByExpanding	The size is scaled to a rectangle as small as possible outside a given rectangle, preserving the aspect ratio.

See also

scale() scaled()

PySide2.QtCore.Qt.DockWidgetArea

Represents the areas a QDockWidget can be plugged to.

Note

A floating dock widget with tabs can be docked anywhere.

Constant	Description
Qt.LeftDockWidgetArea	The left dock area of a QMainWindow .
Qt.RightDockWidgetArea	The right dock area of a QMainWindow .
Qt.TopDockWidgetArea	The top dock area of a QMainWindow .
Qt.BottomDockWidgetArea	The bottom dock area of a QMainWindow .
Qt.AllDockWidgetAreas	All dock widget areas (default).
Qt.NoDockWidgetArea	No dock widget areas.

See also

setAllowedAreas isAreaAllowed

PySide2.QtCore.Qt.DockWidgetAreaSizes

PySide2.QtCore.Qt.ToolBarArea

Constant	Description
Qt.LeftToolBarArea
Qt.RightToolBarArea
Qt.TopToolBarArea
Qt.BottomToolBarArea
Qt.AllToolBarAreas
Qt.NoToolBarArea

PySide2.QtCore.Qt.ToolBarAreaSizes

PySide2.QtCore.Qt.DateFormat

Constant	Description
Qt.TextDate	The default Qt format, which includes the day and month name, the day number in the month, and the year in full. The day and month names will be short, localized names. This is basically equivalent to using the date format string, “ddd MMM d yyyy”. See toString() for more information.
Qt.ISODate	ISO 8601 extended format: either yyyy-MM-dd for dates or yyyy-MM-ddTHH:mm:ss (e.g. 2017-07-24T15:46:29), or with a time-zone suffix (Z for UTC otherwise an offset as [+|-]HH:mm) where appropriate for combined dates and times.
Qt.ISODateWithMs	ISO 8601 extended format, including milliseconds if applicable.
Qt.SystemLocaleShortDate	This enum value is deprecated and shall be removed in Qt 6. Use QLocale ‘s methods for converting dates and times to and from strings, with the short format of the locale used by the operating system .
Qt.SystemLocaleLongDate	This enum value is deprecated and shall be removed in Qt 6. Use QLocale ‘s methods for converting dates and times to and from strings, with the long format of the locale used by the operating system .
Qt.DefaultLocaleShortDate	This enum value is deprecated and shall be removed in Qt 6. Use QLocale ‘s methods for converting dates and times to and from strings, with the short format of the application's locale .
Qt.DefaultLocaleLongDate	This enum value is deprecated and shall be removed in Qt 6. Use QLocale ‘s methods for converting dates and times to and from strings, with the long format the application's locale .
Qt.SystemLocaleDate	This enum value is deprecated and shall be removed in Qt 6. It is equivalent to .
Qt.LocaleDate	This enum value is deprecated and shall be removed in Qt 6. It is equivalent to .
Qt.LocalDate	This enum value is deprecated and shall be removed in Qt 6. It is equivalent to .
Qt.RFC2822Date	RFC 2822, RFC 850 and RFC 1036 format: either [ddd,] dd MMM yyyy [HH:mm[:ss]][ ±tzoff] or ddd MMM dd[ HH:mm:ss] yyyy[ ±tzoff] are recognized for combined dates and times, where tzoff is a timezone offset in HHmm format. For dates and times separately, the same formats are matched and the unwanted parts are ignored. In particular, note that a time is not recognized without an accompanying date. When converting dates to string form, format dd MMM yyyy is used, for times the format is HH:mm:ss. For combined date and time, these are combined as dd MMM yyyy HH:mm:ss ±tzoff (omitting the optional leading day of the week from the first format recognized).

Note

For ISODate formats, each y , M and d represents a single digit of the year, month, and day used to specify the date. Each H , m , and s represents a single digit of the hour (up to 24), minute and second used to specify the time. The presence of a literal T character is used to separate the date and time when both are specified. For the RFC2822Date format, MMM stands for the first three letters of the month name in English, the other format characters have the same meaning as for the format.

PySide2.QtCore.Qt.TimeSpec

Constant	Description
Qt.LocalTime	Local time, controlled by a system time-zone setting.
Qt.UTC	Coordinated Universal Time.
Qt.OffsetFromUTC	An offset in seconds from Coordinated Universal Time.
Qt.TimeZone	A named time zone.

Both and will take care of transitions, such as the start and end of daylight-saving time. UTC is the standard time relative to which time-zones are usually specified: Greenwich Mean Time has zero offset from it. Neither UTC nor has any transitions.

Note

After a change to the system time-zone setting, the behavior of -based QDateTime objects created before the change is undefined: QDateTime may have cached data that the change invalidates. (This is not triggered by transitions of the system time-zone.) In long-running processes, updates to the system’s time-zone data (e.g. when politicians change the rules for a zone) may likewise lead to conflicts between the updated time-zone information and data cached by QDateTime objects created before the update, using either or .

PySide2.QtCore.Qt.DayOfWeek

Constant	Description
Qt.Monday
Qt.Tuesday
Qt.Wednesday
Qt.Thursday
Qt.Friday
Qt.Saturday
Qt.Sunday

PySide2.QtCore.Qt.ScrollBarPolicy

This enum type describes the various modes of QAbstractScrollArea ‘s scroll bars.

Constant	Description
Qt.ScrollBarAsNeeded	QAbstractScrollArea shows a scroll bar when the content is too large to fit and not otherwise. This is the default.
Qt.ScrollBarAlwaysOff	QAbstractScrollArea never shows a scroll bar.
Qt.ScrollBarAlwaysOn	QAbstractScrollArea always shows a scroll bar. This property is ignored on systems with transient scroll bars (e.g., on Mac from version 10.7).

(The modes for the horizontal and vertical scroll bars are independent.)

PySide2.QtCore.Qt.CaseSensitivity

Constant	Description
Qt.CaseInsensitive
Qt.CaseSensitive

PySide2.QtCore.Qt.Corner

This enum type specifies a corner in a rectangle:

Constant	Description
Qt.TopLeftCorner	The top-left corner of the rectangle.
Qt.TopRightCorner	The top-right corner of the rectangle.
Qt.BottomLeftCorner	The bottom-left corner of the rectangle.
Qt.BottomRightCorner	The bottom-right corner of the rectangle.

PySide2.QtCore.Qt.Edge

This enum type specifies an edge in a rectangle:

Constant	Description
Qt.TopEdge	The top edge of the rectangle.
Qt.LeftEdge	The left edge of the rectangle.
Qt.RightEdge	The right edge of the rectangle.
Qt.BottomEdge	The bottom edge of the rectangle.

New in version 5.1.

PySide2.QtCore.Qt.ConnectionType

This enum describes the types of connection that can be used between signals and slots. In particular, it determines whether a particular signal is delivered to a slot immediately or queued for delivery at a later time.

Constant	Description
Qt.AutoConnection	(Default) If the receiver lives in the thread that emits the signal, is used. Otherwise, is used. The connection type is determined when the signal is emitted.
Qt.DirectConnection	The slot is invoked immediately when the signal is emitted. The slot is executed in the signalling thread.
Qt.QueuedConnection	The slot is invoked when control returns to the event loop of the receiver’s thread. The slot is executed in the receiver’s thread.
Qt.BlockingQueuedConnection	Same as , except that the signalling thread blocks until the slot returns. This connection must not be used if the receiver lives in the signalling thread, or else the application will deadlock.
Qt.UniqueConnection	This is a flag that can be combined with any one of the above connection types, using a bitwise OR. When is set, connect() will fail if the connection already exists (i.e. if the same signal is already connected to the same slot for the same pair of objects). This flag was introduced in Qt 4.6.

With queued connections, the parameters must be of types that are known to Qt’s meta-object system, because Qt needs to copy the arguments to store them in an event behind the scenes. If you try to use a queued connection and get the error message:

QObject::connect: Cannot queue arguments of type 'MyType'

Call qRegisterMetaType() to register the data type before you establish the connection.

When using signals and slots with multiple threads, see Signals and Slots Across Threads.

See also

connect() qRegisterMetaType() Q_DECLARE_METATYPE()

PySide2.QtCore.Qt.ShortcutContext

For a Shortcut event to occur, the shortcut’s key sequence must be entered by the user in a context where the shortcut is active. The possible contexts are these:

Constant	Description
Qt.WidgetShortcut	The shortcut is active when its parent widget has focus.
Qt.WidgetWithChildrenShortcut	The shortcut is active when its parent widget, or any of its children has focus. Children which are top-level widgets, except pop-ups, are not affected by this shortcut context.
Qt.WindowShortcut	The shortcut is active when its parent widget is a logical subwidget of the active top-level window.
Qt.ApplicationShortcut	The shortcut is active when one of the applications windows are active.

PySide2.QtCore.Qt.FillRule

Specifies which method should be used to fill the paths and polygons.

Constant	Description
Qt.OddEvenFill	Specifies that the region is filled using the odd even fill rule. With this rule, we determine whether a point is inside the shape by using the following method. Draw a horizontal line from the point to a location outside the shape, and count the number of intersections. If the number of intersections is an odd number, the point is inside the shape. This mode is the default.
Qt.WindingFill	Specifies that the region is filled using the non zero winding rule. With this rule, we determine whether a point is inside the shape by using the following method. Draw a horizontal line from the point to a location outside the shape. Determine whether the direction of the line at each intersection point is up or down. The winding number is determined by summing the direction of each intersection. If the number is non zero, the point is inside the shape. This fill mode can also in most cases be considered as the intersection of closed shapes.

PySide2.QtCore.Qt.MaskMode

This enum specifies the behavior of the createMaskFromColor() and createMaskFromColor() functions.

Constant	Description
Qt.MaskInColor	Creates a mask where all pixels matching the given color are opaque.
Qt.MaskOutColor	Creates a mask where all pixels matching the given color are transparent.

PySide2.QtCore.Qt.ClipOperation

Constant	Description
Qt.NoClip	This operation turns clipping off.
Qt.ReplaceClip	Replaces the current clip path/rect/region with the one supplied in the function call.
Qt.IntersectClip	Intersects the current clip path/rect/region with the one supplied in the function call.

PySide2.QtCore.Qt.ItemSelectionMode

This enum is used in QGraphicsItem , QGraphicsScene and QGraphicsView to specify how items are selected, or how to determine if shapes and items collide.

Constant	Description
Qt.ContainsItemShape	The output list contains only items whose shape is fully contained inside the selection area. Items that intersect with the area’s outline are not included.
Qt.IntersectsItemShape	The output list contains both items whose shape is fully contained inside the selection area, and items that intersect with the area’s outline. This is a common mode for rubber band selection.
Qt.ContainsItemBoundingRect	The output list contains only items whose bounding rectangle is fully contained inside the selection area. Items that intersect with the area’s outline are not included.
Qt.IntersectsItemBoundingRect	The output list contains both items whose bounding rectangle is fully contained inside the selection area, and items that intersect with the area’s outline. This method is commonly used for determining areas that need redrawing.

See also

items() collidingItems() items() collidesWithItem() collidesWithPath()

PySide2.QtCore.Qt.ItemSelectionOperation

This enum is used in QGraphicsScene to specify what to do with currently selected items when setting a selection area.

Constant	Description
Qt.ReplaceSelection	The currently selected items are replaced by items in the selection area.
Qt.AddToSelection	The items in the selection area are added to the currently selected items.

See also

setSelectionArea()

New in version 5.5.

PySide2.QtCore.Qt.TransformationMode

This enum type defines whether image transformations (e.g., scaling) should be smooth or not.

Constant	Description
Qt.FastTransformation	The transformation is performed quickly, with no smoothing.
Qt.SmoothTransformation	The resulting image is transformed using bilinear filtering.

See also

scaled()

PySide2.QtCore.Qt.Axis

This enum type defines three values to represent the three axes in the cartesian coordinate system.

Constant	Description
Qt.XAxis	The X axis.
Qt.YAxis	The Y axis.
Qt.ZAxis	The Z axis.

See also

rotate() rotateRadians()

PySide2.QtCore.Qt.FocusReason

This enum specifies why the focus changed. It will be passed through setFocus and can be retrieved in the QFocusEvent sent to the widget upon focus change.

Constant	Description
Qt.MouseFocusReason	A mouse action occurred.
Qt.TabFocusReason	The Tab key was pressed.
Qt.BacktabFocusReason	A Backtab occurred. The input for this may include the Shift or Control keys; e.g. Shift+Tab.
Qt.ActiveWindowFocusReason	The window system made this window either active or inactive.
Qt.PopupFocusReason	The application opened/closed a pop-up that grabbed/released the keyboard focus.
Qt.ShortcutFocusReason	The user typed a label’s buddy shortcut
Qt.MenuBarFocusReason	The menu bar took focus.
Qt.OtherFocusReason	Another reason, usually application-specific.

See also

Keyboard Focus in Widgets

PySide2.QtCore.Qt.ContextMenuPolicy

This enum type defines the various policies a widget can have with respect to showing a context menu.

Constant	Description
Qt.NoContextMenu	the widget does not feature a context menu, context menu handling is deferred to the widget’s parent.
Qt.PreventContextMenu	the widget does not feature a context menu, and in contrast to NoContextMenu, the handling is not deferred to the widget’s parent. This means that all right mouse button events are guaranteed to be delivered to the widget itself through mousePressEvent() , and mouseReleaseEvent() .
Qt.DefaultContextMenu	the widget’s contextMenuEvent() handler is called.
Qt.ActionsContextMenu	the widget displays its actions() as context menu.
Qt.CustomContextMenu	the widget emits the customContextMenuRequested() signal.

PySide2.QtCore.Qt.InputMethodQuery

Constant	Description
Qt.ImEnabled	The widget accepts input method input.
Qt.ImMicroFocus	This query is obsolete. Use ImCursorRectangle instead.
Qt.ImCursorRectangle	The rectangle covering the area of the input cursor in widget coordinates.
Qt.ImFont	The currently used font for text input.
Qt.ImCursorPosition	The logical position of the cursor within the text surrounding the input area (see ImSurroundingText).
Qt.ImSurroundingText	The plain text around the input area, for example the current paragraph.
Qt.ImCurrentSelection	The currently selected text.
Qt.ImMaximumTextLength	The maximum number of characters that the widget can hold. If there is no limit, QVariant() is returned.
Qt.ImAnchorPosition	The position of the selection anchor. This may be less or greater than ImCursorPosition, depending on which side of selection the cursor is. If there is no selection, it returns the same as ImCursorPosition.
Qt.ImHints	The hints for input method on expected input. (See InputMethodHints )
Qt.ImPreferredLanguage	The preferred input language.
Qt.ImPlatformData	Platform specific data for input method.
Qt.ImAbsolutePosition	The logical position of the cursor within the entire document.
Qt.ImTextBeforeCursor	The plain text before the cursor. The widget can decide how much text to return, but must not return an empty string unless the cursor is at the start of the document.
Qt.ImTextAfterCursor	The plain text after the cursor. The widget can decide how much text to return, but must not return an empty string unless the cursor is at the end of the document.
Qt.ImEnterKeyType	The Enter key type.
Qt.ImAnchorRectangle	The bounding rectangle of the selection anchor. This value was added in Qt 5.7.
Qt.ImInputItemClipRectangle	The actual exposed input item rectangle. Parts of the input item might be clipped. This value will take clipping into consideration and return the actual painted item rectangle. The rectangle is in widget coordinates.

Masks:

Constant	Description
Qt.ImQueryInput	Commonly changed properties on input.
Qt.ImQueryAll	Query for all input method properties.

See also

QInputMethodQueryEvent

PySide2.QtCore.Qt.InputMethodHint

Constant	Description
Qt.ImhNone	No hints.

Flags that alter the behavior:

Constant	Description
Qt.ImhHiddenText	The input method should not show the characters while typing. This is automatically set when setting echoMode to Password. Note that setting ImhHiddenText does not change the echo mode.
Qt.ImhSensitiveData	Typed text should not be stored by the active input method in any persistent storage like predictive user dictionary.
Qt.ImhNoAutoUppercase	The input method should not try to automatically switch to upper case when a sentence ends.
Qt.ImhPreferNumbers	Numbers are preferred (but not required).
Qt.ImhPreferUppercase	Upper case letters are preferred (but not required).
Qt.ImhPreferLowercase	Lower case letters are preferred (but not required).
Qt.ImhNoPredictiveText	Do not use predictive text (i.e. dictionary lookup) while typing.
Qt.ImhDate	The text editor functions as a date field.
Qt.ImhTime	The text editor functions as a time field.
Qt.ImhPreferLatin	Latin characters are preferred (but not required).
Qt.ImhMultiLine	Multiple lines can be entered into the text field.
Qt.ImhNoEditMenu	Do not use built-in edit menu. This flag was introduced in Qt 5.11.
Qt.ImhNoTextHandles	Do not use built-in text cursor and selection handles. This flag was introduced in Qt 5.11.

Flags that restrict input (exclusive flags):

Constant	Description
Qt.ImhDigitsOnly	Only digits are allowed.
Qt.ImhFormattedNumbersOnly	Only number input is allowed. This includes decimal point and minus sign.
Qt.ImhUppercaseOnly	Only upper case letter input is allowed.
Qt.ImhLowercaseOnly	Only lower case letter input is allowed.
Qt.ImhDialableCharactersOnly	Only characters suitable for phone dialing are allowed.
Qt.ImhEmailCharactersOnly	Only characters suitable for email addresses are allowed.
Qt.ImhUrlCharactersOnly	Only characters suitable for URLs are allowed.
Qt.ImhLatinOnly	Only latin based input is allowed.

Masks:

Constant	Description
Qt.ImhExclusiveInputMask	This mask yields nonzero if any of the exclusive flags are used.

Note

If several exclusive flags are OR-ed together, the resulting character set will consist of the union of the specified sets. For instance specifying ImhNumbersOnly and ImhUppercaseOnly would yield a set consisting of numbers and uppercase letters.

See also

inputMethodHints()

New in version 4.6.

PySide2.QtCore.Qt.EnterKeyType

This can be used to alter the appearance of the Return key on an on-screen keyboard.

Note

Not all of these values are supported on all platforms. For unsupported values the default key will be used instead.

Constant	Description
Qt.EnterKeyDefault	The default Enter key. This can either be a button closing the keyboard, or a Return button causing a new line in case of a multi-line input field.
Qt.EnterKeyReturn	Show a Return button that inserts a new line. The keyboard will not close when this button is pressed.
Qt.EnterKeyDone	Show a “Done” button. The keyboard will close when this button is pressed.
Qt.EnterKeyGo	Show a “Go” button. Typically used in an address bar when entering a URL; the keyboard will close when this button is pressed.
Qt.EnterKeySend	Show a “Send” button. The keyboard will close when this button is pressed.
Qt.EnterKeySearch	Show a “Search” button. The keyboard will close when this button is pressed.
Qt.EnterKeyNext	Show a “Next” button. Typically used in a form to allow navigating to the next input field; the keyboard will not close when this button is pressed.
Qt.EnterKeyPrevious	Show a “Previous” button. The keyboard will not close when this button is pressed.

New in version 5.6.

PySide2.QtCore.Qt.ToolButtonStyle

The style of the tool button, describing how the button’s text and icon should be displayed.

Constant	Description
Qt.ToolButtonIconOnly	Only display the icon.
Qt.ToolButtonTextOnly	Only display the text.
Qt.ToolButtonTextBesideIcon	The text appears beside the icon.
Qt.ToolButtonTextUnderIcon	The text appears under the icon.
Qt.ToolButtonFollowStyle	Follow the style .

PySide2.QtCore.Qt.LayoutDirection

Specifies the direction of Qt’s layouts and text handling.

Constant	Description
Qt.LeftToRight	Left-to-right layout.
Qt.RightToLeft	Right-to-left layout.
Qt.LayoutDirectionAuto	Automatic layout.

Right-to-left layouts are necessary for certain languages, notably Arabic and Hebrew.

serves two purposes. When used in conjunction with widgets and layouts, it will imply to use the layout direction set on the parent widget or QApplication . This has the same effect as unsetLayoutDirection() .

When is used in conjunction with text layouting, it will imply that the text directionality is determined from the content of the string to be layouted.

See also

setLayoutDirection() setLayoutDirection() setTextDirection() isRightToLeft()

PySide2.QtCore.Qt.AnchorPoint

Specifies a side of a layout item that can be anchored. This is used by QGraphicsAnchorLayout .

Constant	Description
Qt.AnchorLeft	The left side of a layout item.
Qt.AnchorHorizontalCenter	A “virtual” side that is centered between the left and the right side of a layout item.
Qt.AnchorRight	The right side of a layout item.
Qt.AnchorTop	The top side of a layout item.
Qt.AnchorVerticalCenter	A “virtual” side that is centered between the top and the bottom side of a layout item.
Qt.AnchorBottom	The bottom side of a layout item.

See also

QGraphicsAnchorLayout

New in version 4.6.

PySide2.QtCore.Qt.FindChildOption

Constant	Description
Qt.FindDirectChildrenOnly	Looks only at the direct children of the object.
Qt.FindChildrenRecursively	Looks at all children of the object (recursive search).

New in version 5.0.

PySide2.QtCore.Qt.DropAction

Constant	Description
Qt.CopyAction	Copy the data to the target.
Qt.MoveAction	Move the data from the source to the target.
Qt.LinkAction	Create a link from the source to the target.
Qt.ActionMask
Qt.IgnoreAction	Ignore the action (do nothing with the data).
Qt.TargetMoveAction	On Windows, this value is used when the ownership of the D&D data should be taken over by the target application, i.e., the source application should not delete the data. On X11 this value is used to do a move. is not used on the Mac.

PySide2.QtCore.Qt.CheckState

This enum describes the state of checkable items, controls, and widgets.

Constant	Description
Qt.Unchecked	The item is unchecked.
Qt.PartiallyChecked	The item is partially checked. Items in hierarchical models may be partially checked if some, but not all, of their children are checked.
Qt.Checked	The item is checked.

See also

QCheckBox ItemFlags ItemDataRole

PySide2.QtCore.Qt.ItemDataRole

Each item in the model has a set of data elements associated with it, each with its own role. The roles are used by the view to indicate to the model which type of data it needs. Custom models should return data in these types.

The general purpose roles (and the associated types) are:

Constant	Description
Qt.DisplayRole	The key data to be rendered in the form of text. ( QString )
Qt.DecorationRole	The data to be rendered as a decoration in the form of an icon. ( QColor , QIcon or QPixmap )
Qt.EditRole	The data in a form suitable for editing in an editor. ( QString )
Qt.ToolTipRole	The data displayed in the item’s tooltip. ( QString )
Qt.StatusTipRole	The data displayed in the status bar. ( QString )
Qt.WhatsThisRole	The data displayed for the item in “What’s This?” mode. ( QString )
Qt.SizeHintRole	The size hint for the item that will be supplied to views. ( QSize )

Roles describing appearance and meta data (with associated types):

Constant	Description
Qt.FontRole	The font used for items rendered with the default delegate. ( QFont )
Qt.TextAlignmentRole	The alignment of the text for items rendered with the default delegate. ( Alignment )
Qt.BackgroundRole	The background brush used for items rendered with the default delegate. ( QBrush )
Qt.BackgroundColorRole	This role is obsolete. Use instead.
Qt.ForegroundRole	The foreground brush (text color, typically) used for items rendered with the default delegate. ( QBrush )
Qt.TextColorRole	This role is obsolete. Use instead.
Qt.CheckStateRole	This role is used to obtain the checked state of an item. ( CheckState )
Qt.InitialSortOrderRole	This role is used to obtain the initial sort order of a header view section. ( SortOrder ). This role was introduced in Qt 4.8.

Accessibility roles (with associated types):

Constant	Description
Qt.AccessibleTextRole	The text to be used by accessibility extensions and plugins, such as screen readers. ( QString )
Qt.AccessibleDescriptionRole	A description of the item for accessibility purposes. ( QString )

User roles:

Constant	Description
Qt.UserRole	The first role that can be used for application-specific purposes.

For user roles, it is up to the developer to decide which types to use and ensure that components use the correct types when accessing and setting data.

PySide2.QtCore.Qt.ItemFlag

This enum describes the properties of an item:

Constant	Description
Qt.NoItemFlags	It does not have any properties set.
Qt.ItemIsSelectable	It can be selected.
Qt.ItemIsEditable	It can be edited.
Qt.ItemIsDragEnabled	It can be dragged.
Qt.ItemIsDropEnabled	It can be used as a drop target.
Qt.ItemIsUserCheckable	It can be checked or unchecked by the user.
Qt.ItemIsEnabled	The user can interact with the item.
Qt.ItemIsAutoTristate	The item’s state depends on the state of its children. This enables automatic management of the state of parent items in QTreeWidget (checked if all children are checked, unchecked if all children are unchecked, or partially checked if only some children are checked).
Qt.ItemIsTristate	This enum value is deprecated. Use instead.
Qt.ItemNeverHasChildren	The item never has child items. This is used for optimization purposes only.
Qt.ItemIsUserTristate	The user can cycle through three separate states. This value was added in Qt 5.5.

Note that checkable items need to be given both a suitable set of flags and an initial state, indicating whether the item is checked or not. This is handled automatically for model/view components, but needs to be explicitly set for instances of QListWidgetItem , QTableWidgetItem , and QTreeWidgetItem .

Note that it is undefined behavior to reimplement hasChildren to return true for an index if that index has the flag set.

See also

QAbstractItemModel

PySide2.QtCore.Qt.MatchFlag

This enum describes the type of matches that can be used when searching for items in a model.

Constant	Description
Qt.MatchExactly	Performs QVariant -based matching.
Qt.MatchFixedString	Performs string-based matching. String-based comparisons are case-insensitive unless the MatchCaseSensitive flag is also specified.
Qt.MatchContains	The search term is contained in the item.
Qt.MatchStartsWith	The search term matches the start of the item.
Qt.MatchEndsWith	The search term matches the end of the item.
Qt.MatchCaseSensitive	The search is case sensitive.
Qt.MatchRegExp	Performs string-based matching using a regular expression as the search term. Uses the deprecated QRegExp class. This enum value is deprecated since Qt 5.15.
Qt.MatchRegularExpression	Performs string-based matching using a regular expression as the search term. Uses QRegularExpression . When using this flag, a QRegularExpression object can be passed as parameter and will directly be used to perform the search. The case sensitivity flag will be ignored as the QRegularExpression object is expected to be fully configured. This enum value was added in Qt 5.15.
Qt.MatchWildcard	Performs string-based matching using a string with wildcards as the search term.
Qt.MatchWrap	Perform a search that wraps around, so that when the search reaches the last item in the model, it begins again at the first item and continues until all items have been examined.
Qt.MatchRecursive	Searches the entire hierarchy.

Note

, , , , , , and are mutually exclusive. The behavior achieved by setting several of them in a argument is undefined.

See also

compare() QRegExp QRegularExpression

PySide2.QtCore.Qt.WindowModality

This enum specifies the behavior of a modal window. A modal window is one that blocks input to other windows. Note that windows that are children of a modal window are not blocked.

The values are:

Constant	Description
Qt.NonModal	The window is not modal and does not block input to other windows.
Qt.WindowModal	The window is modal to a single window hierarchy and blocks input to its parent window, all grandparent windows, and all siblings of its parent and grandparent windows.
Qt.ApplicationModal	The window is modal to the application and blocks input to all windows.

See also

windowModality QDialog

PySide2.QtCore.Qt.TextInteractionFlag

This enum specifies how a text displaying widget reacts to user input.

Constant	Description
Qt.NoTextInteraction	No interaction with the text is possible.
Qt.TextSelectableByMouse	Text can be selected with the mouse and copied to the clipboard using a context menu or standard keyboard shortcuts.
Qt.TextSelectableByKeyboard	Text can be selected with the cursor keys on the keyboard. A text cursor is shown.
Qt.LinksAccessibleByMouse	Links can be highlighted and activated with the mouse.
Qt.LinksAccessibleByKeyboard	Links can be focused using tab and activated with enter.
Qt.TextEditable	The text is fully editable.
Qt.TextEditorInteraction	The default for a text editor.
Qt.TextBrowserInteraction	The default for QTextBrowser .

PySide2.QtCore.Qt.EventPriority

This enum can be used to specify event priorities.

Constant	Description
Qt.HighEventPriority	Events with this priority are sent before events with or .
Qt.NormalEventPriority	Events with this priority are sent after events with , but before events with .
Qt.LowEventPriority	Events with this priority are sent after events with or .

Note that these values are provided purely for convenience, since event priorities can be any value between INT_MAX and INT_MIN , inclusive. For example, you can define custom priorities as being relative to each other:

enum CustomEventPriority
{
    // An important event
    ImportantEventPriority = Qt::HighEventPriority,

    // A more important event
    MoreImportantEventPriority = ImportantEventPriority + 1,

    // A critical event
    CriticalEventPriority = 100 * MoreImportantEventPriority,

    // Not that important
    StatusEventPriority = Qt::LowEventPriority,

    // These are less important than Status events
    IdleProcessingDoneEventPriority = StatusEventPriority - 1
};

See also

postEvent()

PySide2.QtCore.Qt.SizeHint

This enum is used by sizeHint()

Constant	Description
Qt.MinimumSize	is used to specify the minimum size of a graphics layout item.
Qt.PreferredSize	is used to specify the preferred size of a graphics layout item.
Qt.MaximumSize	is used to specify the maximum size of a graphics layout item.
Qt.MinimumDescent	is used to specify the minimum descent of a text string in a graphics layout item.

See also

sizeHint()

PySide2.QtCore.Qt.WindowFrameSection

This enum is used to describe parts of a window frame. It is returned by windowFrameSectionAt() to describe what section of the window frame is under the mouse.

Constant	Description
Qt.NoSection
Qt.LeftSection
Qt.TopLeftSection
Qt.TopSection
Qt.TopRightSection
Qt.RightSection
Qt.BottomRightSection
Qt.BottomSection
Qt.BottomLeftSection
Qt.TitleBarArea

See also

windowFrameEvent() paintWindowFrame() windowFrameSectionAt()

PySide2.QtCore.Qt.CoordinateSystem

This enum specifies the coordinate system.

Constant	Description
Qt.DeviceCoordinates	Coordinates are relative to the top-left corner of the object’s paint device.
Qt.LogicalCoordinates	Coordinates are relative to the top-left corner of the object.

New in version 4.6.

PySide2.QtCore.Qt.TouchPointState

This enum represents the state of a touch point at the time a QTouchEvent occurred.

Constant	Description
Qt.TouchPointPressed	The touch point is now pressed.
Qt.TouchPointMoved	The touch point moved.
Qt.TouchPointStationary	The touch point did not move.
Qt.TouchPointReleased	The touch point was released.

New in version 4.6.

PySide2.QtCore.Qt.GestureState

This enum type describes the state of a gesture.

Constant	Description
Qt.NoGesture	No gesture has been detected.
Qt.GestureStarted	A continuous gesture has started.
Qt.GestureUpdated	A gesture continues.
Qt.GestureFinished	A gesture has finished.
Qt.GestureCanceled	A gesture was canceled.

See also

QGesture

New in version 4.6.

PySide2.QtCore.Qt.GestureType

This enum type describes the standard gestures.

Constant	Description
Qt.TapGesture	A Tap gesture.
Qt.TapAndHoldGesture	A Tap-And-Hold (Long-Tap) gesture.
Qt.PanGesture	A Pan gesture.
Qt.PinchGesture	A Pinch gesture.
Qt.SwipeGesture	A Swipe gesture.
Qt.CustomGesture	A flag that can be used to test if the gesture is a user-defined gesture ID.

User-defined gestures are registered with the registerRecognizer() function which generates a custom gesture ID with the flag set.

See also

QGesture grabGesture() grabGesture()

New in version 4.6.

PySide2.QtCore.Qt.GestureFlag

This enum type describes additional flags that can be used when subscribing to a gesture.

Constant	Description
Qt.DontStartGestureOnChildren	By default gestures can start on the widget or over any of its children. Use this flag to disable this and allow a gesture to start on the widget only.
Qt.ReceivePartialGestures	Allows any ignored gesture events to be propagated to parent widgets which have specified this hint. By default only gestures that are in the GestureStarted state are propagated and the widget always gets the full gesture sequence starting with a gesture in the GestureStarted state and ending with a gesture in the GestureFinished or GestureCanceled states.
Qt.IgnoredGesturesPropagateToParent	Since Qt 4.7, this flag allows you to fine-tune gesture event propagation. By setting the flag when grabbing a gesture all ignored partial gestures will propagate to their parent items.

See also

grabGesture() grabGesture()

New in version 4.6.

PySide2.QtCore.Qt.NativeGestureType

This enum returns the gesture type.

Constant	Description
Qt.BeginNativeGesture	Sent before gesture event stream.
Qt.EndNativeGesture	Sent after gesture event stream.
Qt.PanNativeGesture	Sent after a panning gesture. Similar to a click-and-drag mouse movement.
Qt.ZoomNativeGesture	Specifies the magnification delta in percent.
Qt.SmartZoomNativeGesture	Boolean magnification state.
Qt.RotateNativeGesture	Rotation delta in degrees.
Qt.SwipeNativeGesture	Sent after a swipe movements.

New in version 5.0.

PySide2.QtCore.Qt.NavigationMode

This enum type describes the mode for moving focus.

Constant	Description
Qt.NavigationModeNone	Only the touch screen is used.
Qt.NavigationModeKeypadTabOrder	Key_Up and Key_Down are used to change focus.
Qt.NavigationModeKeypadDirectional	Key_Up , Key_Down , Key_Left and Key_Right are used to change focus.
Qt.NavigationModeCursorAuto	The mouse cursor is used to change focus, it is displayed only on non touchscreen devices. The keypad is used to implement a virtual cursor, unless the device has an analog mouse type of input device (e.g. touchpad). This is the recommended setting for an application such as a web browser that needs pointer control on both touch and non-touch devices.
Qt.NavigationModeCursorForceVisible	The mouse cursor is used to change focus, it is displayed regardless of device type. The keypad is used to implement a virtual cursor, unless the device has an analog mouse type of input device (e.g. touchpad)

Note

Cursor navigation is not currently implemented on any platform and behaves as .

See also

setNavigationMode() navigationMode()

New in version 4.6.

PySide2.QtCore.Qt.CursorMoveStyle

This enum describes the movement style available to text cursors. The options are:

Constant	Description
Qt.LogicalMoveStyle	Within a left-to-right text block, decrease cursor position when pressing left arrow key, increase cursor position when pressing the right arrow key. If the text block is right-to-left, the opposite behavior applies.
Qt.VisualMoveStyle	Pressing the left arrow key will always cause the cursor to move left, regardless of the text’s writing direction. Pressing the right arrow key will always cause the cursor to move right.

New in version 4.8.

PySide2.QtCore.Qt.TimerType

The timer type indicates how accurate a timer can be.

Constant	Description
Qt.PreciseTimer	Precise timers try to keep millisecond accuracy
Qt.CoarseTimer	Coarse timers try to keep accuracy within 5% of the desired interval
Qt.VeryCoarseTimer	Very coarse timers only keep full second accuracy

On UNIX (including Linux, macOS, and iOS), Qt will keep millisecond accuracy for . For , the interval will be adjusted up to 5% to align the timer with other timers that are expected to fire at or around the same time. The objective is to make most timers wake up at the same time, thereby reducing CPU wakeups and power consumption.

On Windows, Qt will use Windows’s Multimedia timer facility (if available) for and normal Windows timers for and .

On all platforms, the interval for is rounded to the nearest full second (e.g. an interval of 23500ms will be rounded to 24000ms, and 20300ms to 20000ms).

New in version 5.0.

PySide2.QtCore.Qt.ScrollPhase

This enum describes the phase of scrolling.

Constant	Description
Qt.NoScrollPhase	The input device doesn’t support scroll phase. This value was introduced in Qt 5.7.
Qt.ScrollBegin	Scrolling is about to begin, but the scrolling distance did not yet change.
Qt.ScrollUpdate	The scrolling distance has changed (default).
Qt.ScrollEnd	Scrolling has ended, and the scrolling distance did not change anymore.
Qt.ScrollMomentum	The user no longer touches the input device, but scrolling continues due to scroll momentum. This value was introduced in Qt 5.12.

New in version 5.2.

PySide2.QtCore.Qt.MouseEventSource

This enum describes the source of a mouse event and can be useful to determine if the event is an artificial mouse event originating from another device such as a touchscreen.

Constant	Description
Qt.MouseEventNotSynthesized	The most common value. On platforms where such information is available this value indicates that the event was generated in response to a genuine mouse event in the system.
Qt.MouseEventSynthesizedBySystem	Indicates that the mouse event was synthesized from a touch event by the platform.
Qt.MouseEventSynthesizedByQt	Indicates that the mouse event was synthesized from an unhandled touch event by Qt.
Qt.MouseEventSynthesizedByApplication	Indicates that the mouse event was synthesized by the application. This allows distinguishing application-generated mouse events from the ones that are coming from the system or are synthesized by Qt. This value was introduced in Qt 5.6

See also

AA_SynthesizeMouseForUnhandledTouchEvents

New in version 5.3.

PySide2.QtCore.Qt.MouseEventFlag

This enum provides additional information concerning a QMouseEvent .

Constant	Description
Qt.MouseEventCreatedDoubleClick	Indicates that Qt has created a MouseButtonDblClick event from this event. The flag is set in the causing MouseButtonPress , and not in the resulting MouseButtonDblClick .

New in version 5.3.

PySide2.QtCore.Qt.ChecksumType

This enum describes the possible standards used by qChecksum() .

Constant	Description
Qt.ChecksumIso3309	Checksum calculation based on ISO 3309.
Qt.ChecksumItuV41	Checksum calculation based on ITU-V.41.

New in version 5.9.

PySide2.QtCore.Qt.HighDpiScaleFactorRoundingPolicy

This enum describes the possible High-DPI scale factor rounding policies, which decide how non-integer scale factors (such as Windows 150%) are handled.

The active policy is set by calling QGuiApplication::setHighDdpiScaleFactorRoundingPolicy() before the application object is created, or by setting the QT_SCALE_FACTOR_ROUNDING_POLICY environment variable.

Constant	Description
Qt.HighDpiScaleFactorRoundingPolicy.Round	Round up for .5 and above.
Qt.HighDpiScaleFactorRoundingPolicy.Ceil	Always round up.
Qt.HighDpiScaleFactorRoundingPolicy.Floor	Always round down.
Qt.HighDpiScaleFactorRoundingPolicy.RoundPreferFloor	Round up for .75 and above.
Qt.HighDpiScaleFactorRoundingPolicy.PassThrough	Don’t round.

See also

setHighDpiScaleFactorRoundingPolicy() AA_EnableHighDpiScaling

New in version 5.14.

static PySide2.QtCore.Qt.bin(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setIntegerBase (2) on stream and returns stream .

See also

oct() dec() hex() QTextStream manipulators

static PySide2.QtCore.Qt.bom(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Toggles insertion of the Byte Order Mark on stream when QTextStream is used with a UTF codec.

See also

setGenerateByteOrderMark() QTextStream manipulators

static PySide2.QtCore.Qt.center(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setFieldAlignment ( AlignCenter ) on stream and returns stream .

See also

left() right() QTextStream manipulators

static PySide2.QtCore.Qt.dec(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setIntegerBase (10) on stream and returns stream .

See also

bin() oct() hex() QTextStream manipulators

static PySide2.QtCore.Qt.endl(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Writes ‘\n’ to the stream and flushes the stream.

Equivalent to

stream << '\n' << flush

Note: On Windows, all ‘\n’ characters are written as ‘\r\n’ if QTextStream ‘s device or string is opened using the Text flag.

See also

flush() reset() QTextStream manipulators

static PySide2.QtCore.Qt.fixed(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setRealNumberNotation ( FixedNotation ) on stream and returns stream .

See also

scientific() QTextStream manipulators

static PySide2.QtCore.Qt.flush(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls flush() on stream and returns stream .

See also

endl() reset() QTextStream manipulators

static PySide2.QtCore.Qt.forcepoint(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() | ForcePoint ) on stream and returns stream .

See also

noforcepoint() forcesign() showbase() QTextStream manipulators

static PySide2.QtCore.Qt.forcesign(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() | ForceSign ) on stream and returns stream .

See also

noforcesign() forcepoint() showbase() QTextStream manipulators

static PySide2.QtCore.Qt.hex(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setIntegerBase (16) on stream and returns stream .

Note

The hex modifier can only be used for writing to streams.

See also

bin() oct() dec() QTextStream manipulators

static PySide2.QtCore.Qt.left(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setFieldAlignment ( AlignLeft ) on stream and returns stream .

See also

right() center() QTextStream manipulators

static PySide2.QtCore.Qt.lowercasebase(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() & ~ UppercaseBase ) on stream and returns stream .

See also

uppercasebase() lowercasedigits() QTextStream manipulators

static PySide2.QtCore.Qt.lowercasedigits(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() & ~ UppercaseDigits ) on stream and returns stream .

See also

uppercasedigits() lowercasebase() QTextStream manipulators

static PySide2.QtCore.Qt.noforcepoint(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() & ~ ForcePoint ) on stream and returns stream .

See also

forcepoint() noforcesign() noshowbase() QTextStream manipulators

static PySide2.QtCore.Qt.noforcesign(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() & ~ ForceSign ) on stream and returns stream .

See also

forcesign() noforcepoint() noshowbase() QTextStream manipulators

static PySide2.QtCore.Qt.noshowbase(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() & ~ ShowBase ) on stream and returns stream .

See also

showbase() noforcesign() noforcepoint() QTextStream manipulators

static PySide2.QtCore.Qt.oct(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setIntegerBase (8) on stream and returns stream .

See also

bin() dec() hex() QTextStream manipulators

static PySide2.QtCore.Qt.reset(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls reset() on stream and returns stream .

See also

flush() QTextStream manipulators

static PySide2.QtCore.Qt.right(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setFieldAlignment ( AlignRight ) on stream and returns stream .

See also

left() center() QTextStream manipulators

static PySide2.QtCore.Qt.scientific(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setRealNumberNotation ( ScientificNotation ) on stream and returns stream .

See also

fixed() QTextStream manipulators

static PySide2.QtCore.Qt.showbase(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() | ShowBase ) on stream and returns stream .

See also

noshowbase() forcesign() forcepoint() QTextStream manipulators

static PySide2.QtCore.Qt.uppercasebase(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() | UppercaseBase ) on stream and returns stream .

See also

lowercasebase() uppercasedigits() QTextStream manipulators

static PySide2.QtCore.Qt.uppercasedigits(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls setNumberFlags ( numberFlags() | UppercaseDigits ) on stream and returns stream .

See also

lowercasedigits() uppercasebase() QTextStream manipulators

static PySide2.QtCore.Qt.ws(s)

Parameters:

s – PySide2.QtCore.QTextStream

Return type:

PySide2.QtCore.QTextStream

Calls skipWhiteSpace() on stream and returns stream .

See also

QTextStream manipulators