C

Supported target boards and development hosts

Qt Quick Ultralite supports a variety of microcontroller-based hardware platforms that are available in the market. Currently supported boards are listed below. Click the board name in the table for information on how to get started with the board.

Qt for MCUs can be ported to any modern microcontroller that is capable of driving a display. If your hardware is not listed, contact us for an estimation of the porting effort, or follow the Qt Quick Ultralite Platform Porting Guide to port Qt Quick Ultralite to this hardware.

Support Levels for Target Hardware

There are multiple levels of support that apply across specific hardware and OS combinations.

Tier 1: Reference Targets

  • Issues on this reference target are given a higher priority than lower tier targets.
  • Maintained for the entire 2.x series.
  • Upgraded to support all Qt Quick Ultralite features when possible.
  • Covered by Standard Qt Support.
  • Releases are available via Qt Online Installer.

The reference target boards are listed in the following table, grouped by vendor.

Hardware boardMCUCompilerOperating system(s)
MIMXRT1050-EVKBMIMXRT1052DVL6BGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal, FreeRTOS
MIMXRT1060-EVKBMIMXRT1060DVL6BGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal
MIMXRT1064-EVKMIMXRT1064DVL6AGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal, FreeRTOS
MIMXRT1170-EVKBMIMXRT1176DVMAAGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40FreeRTOS
Hardware boardMCUCompilerOperating system(s)
RH850/D1M1A Evaluation BoardRH850/D1M1A (R7F701461)Green Hills MULTI 7.1.6, Compiler 2015.1.7 or 2018.1.5Bare Metal
Hardware boardMCUCompilerOperating system(s)
STM32F769I-DISCOVERYSTM32F769NIGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal, FreeRTOS
STM32H750B-DISCOVERYSTM32H750XBGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal
STM32F469I-DISCOVERYSTM32F469NIGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal
Hardware boardMCUCompilerOperating system(s)Host(s)
TRAVEO™ T2G TVII-C-2D-4M Evaluation KitCYT3DLIAR Functional Safety Build Tools for Arm 8.22.3, Green Hills MULTI Compiler for Embedded ARM 2017.1.4 or 2019.5.4Bare MetalWindows host only
TRAVEO™ T2G TVII-C-2D-6M Evaluation KitCYT4DNIAR Functional Safety Build Tools for Arm 8.22.3, Green Hills MULTI Compiler for Embedded ARM 2017.1.4 or 2019.5.4Bare MetalWindows host only

Note: Infineon TRAVEO™ T2G prebuilt libraries are built using the GHS 2017.1.4 compiler. To use a different compiler version you have to rebuild the Qt Quick Ultralite libraries. See Building Qt Quick Ultralite from sources for more information.

Tier 2: Verified Targets

The verified target boards are listed in the following table, grouped by vendor.

Hardware boardMCUCompilerOperating system(s)
EK-RA6M3GR7FA6M3AH3CFCGNU Arm GCC 10.3-2021.10, IAR Build Tools for Arm V9.40Bare Metal, FreeRTOS
EK-RA8D1 (Technology Preview)R7FA8D1BHECBDGNU Arm GCC 12.2.MPACBTI-Rel1Bare Metal
Hardware boardMCUCompilerOperating system(s)Host(s)
TRAVEO™ T2G TVII-C-2D-6M-DDR Evaluation Kit (Technology Preview)CYT4ENIAR Functional Safety Build Tools for Arm 8.22.3, Green Hills MULTI Compiler for Embedded ARM 2017.1.4 or 2019.5.4Bare MetalWindows host only

Note: Infineon TRAVEO™ T2G prebuilt libraries are built using the GHS 2017.1.4 compiler. To use a different compiler version you have to rebuild the Qt Quick Ultralite libraries. See Building Qt Quick Ultralite from sources for more information.

Tier 3: Other Targets

The following table lists hardware that Qt for MCUs has been ported to but does not qualify as reference or verified targets. These ports are not maintained for every Qt for MCUs release, which means they:

  • do not always include implementations of all Qt Quick Ultralite features,
  • hardware not regularly tested,
  • and are not covered by Standard Qt Support.

You can get these ports from The Qt Company or its partner vendors.

Tier 3: Other Targets
Hardware boardMCUCompilerOperating system(s)How to get the port
AutoChips AC8015 Development BoardArm Cortex-A53GNU ArmFreeRTOSThe Qt Company
Ambiq Apollo4 Plus Display KitAmbiq Apollo4 PlusGNU ArmBare MetalThe Qt Company
Embedded Artists iMX RT1176 Developer's KitMIMXRT1176DVMAAGNU Arm, IARFreeRTOSEmbedded Artists
Espressif ESP32-S3-BOXESP32-S3GNU XtensaFreeRTOSThe Qt Company
Espressif ESP32-S3-Korvo-2ESP32-S3GNU XtensaFreeRTOSThe Qt Company
Generalplus GP328xx HMI Demo BoardGP3285xx seriesGNU ArmFreeRTOSThe Qt Company
ITE IT986x Evaluation BoardITE IT986x SeriesITE GCCOpenRTOSThe Qt Company
Nordic Semiconductor nRF5340 DKnRF5340GNU ArmZephyrThe Qt Company
Nuvoton Gerda™-4LARM Cortex®-M7IARµITRON 4.0The Qt Company
Nuvoton Gerda™-EINSARM Cortex®-M7IARµITRON 4.0The Qt Company
Nuvoton NuMaker-HMI-N9H20N9H20GNU ArmBare MetalThe Qt Company
NXP i.MX RT595 Evaluation KitMIMXRT595SGNU ArmFreeRTOSThe Qt Company
Renesas R-Car Gen3Arm Cortex-R7GNU ArmFreeRTOS, SafeRTOSThe Qt Company
Renesas RH850/D1M1-V2 Evaluation BoardRH850/D1M1-V2 (R7F701462)Green Hills CompilerBare MetalThe Qt Company
SemiDrive E3 Development BoardSemiDrive E3340GNU Arm, IARFreeRTOSThe Qt Company
STM32F7508 Discovery KitSTM32F750N8H6GNU Arm, IARBare Metal, FreeRTOSThe Qt Company
STM32L4R9I Discovery KitSTM32L4R9AII6GNU Arm, IARBare MetalThe Qt Company
STM32L4R9I Evaluation BoardSTM32L4R9AII6GNU Arm, IARBare MetalThe Qt Company
STM32MP157F-DK2 Discovery kitSTM32MP157GNU ArmBoot to Qt LinuxThe Qt Company
STM32U5x9J-DKx Discovery KitSTM32U5X9NGNU Arm, IARBare Metal, FreeRTOSThe Qt Company
Toradex Apalis iMX6NXP® i.MX 6QuadGNU ArmBoot to Qt LinuxThe Qt Company
Xilinx Zynq UltraScale+ MPSoCArm Cortex-R5FGNU ArmBare Metal, FreeRTOSThe Qt Company

Supported features

Infineon TRAVEO™ T2GNXP 1050NXP 1060NXP 1064NXP 1170RA6M3GRH850/D1M1ASTM32 F769I-DSTM32 H750B-DSTM32 F469I-D
Hardware accelerated blitting
- Alpha8HWHW 5HW 5HW 5HWHWHWHWHWHW
- Alpha1n/aSWSWSWSWSWSWSWSWSW
- RGB332n/aSWSWSWSWSWSWSWSWSW
- ARGB4444HWHWHWHWHWHWHWHWHWHW
- RGB565HWHWHWHWHWHWHWHWHWHW
- RGB888HWSWSWSWHWHWHWHWHWHW
- ARGB8888HWHWHWHWHWHWHWHWHWHW
- RLE_ARGB8888HW 13SWSWSWSWSWHWHW 7SWHW 7
- RLE_RGB32HW 13n/an/an/an/an/aHWn/an/an/a
- RLE_RGB888HW 13HW 6 7HW 6 7HW 6 7SWSWSWHW 6 7HW 6 7HW 6 7
Hardware accelerated basic shapes
- Rectangle 3 3 3 3 3 3
- Rounded rectangle
Layers 1 1 1 1
- ItemLayer 1 1 1 1
- SpriteLayer
- ImageLayer 1 1 1 1
Monotype Spark
Multiple screens 1 1
Shapes (vector graphics) 4 14 14 14 2 14 2 14 14 14 14
Touch
Transformations
- TranslateHWHWHWHWHWHWHWHWHWHW
- Uniform scaleHWSWSWSWHWHWHWSWSWSW
- ScaleHWSWSWSWHWHWHWSWSWSW
- RotationHWSWSWSWHWSWHWSWSWSW
- Scale rotationHWSWSWSWHWSWHWSWSWSW
- ShearHWSWSWSWHWSWHWSWSWSW
- ProjectHWSWSWSWHWSWHWSWSWSW
Font quality
- VeryHighHWSWSWSWHWHWHWHWHWHW
- VeryLowSWSWSWSWSWSWSWSW
Framebuffers
Double buffering 8
Single buffering 9 9 9 9 9 8 9 10 9 10
Partial buffering 15 15 15 15 1 15 1
32 bpp color depth 11 11 11 1 1
24 bpp color depth 12 11 11 11 1 1
16 bpp color depth 12 12 12 1 1 1
  • Feature is supported by the platform adaptation
  • 1 Platform library has to be rebuilt
  • 1 Feature is supported by the hardware, but not implemented in the reference platform adaptation
  • 2 Feature is partially supported by the hardware, but not implemented in the reference platform adaptation
  • 3 Blended as an image that is rendered by the CPU
  • 4 Feature is supported by the hardware but self intersecting paths are not supported
  • 5 Hardware blending via an intermediate ARGB8888 buffer
  • 6 Accelerated blending when opacity != 1 is used
  • 7 Source images are decompressed into small intermediate buffers chunk by chunk before blending
  • 8 The reference board has limited available memory, so by default single buffering is used. This comes with a certain risk of visual flickering if the application contents are expensive to render
  • 9 Single buffering is supported by the hardware, although it is likely to cause visual flickering. For this reason it's not implemented in the reference platform adaptation
  • 10 Single buffering is supported by the hardware without any visual flickering, since the display contains its own framebuffer memory. It does however come with a significant performance cost. The reference platform adaptation needs modifications to enable the single buffering support
  • 11 The board families support 24 bpp and 32 bpp framebuffers, but the reference boards have only 16 lines physically connected to the LCD interface, so only 16 bpp is supported
  • 12 These color depths are available using the ItemLayer API, but not by using QUL_COLOR_DEPTH
  • 13 TRAVEO™ T2G specific hardware accelerated RLE format is used
  • 14 Feature is supported by software
  • 15 Feature could be supported if the display has dedicated framebuffer memory, but it is not implemented in the reference platform adaptation
  • Feature is not supported by the hardware
  • HW is short for hardware accelerated blending
  • SW is short for software based blending

Supported target operating systems

With Qt for MCUs, applications can run on bare metal. Additionally, the following target operating systems are supported:

If you need to run applications on other target operating systems, contact The Qt Company.

Supported development hosts

The development hosts supported by Qt for MCUs are:

  • Windows 10 64-bit
  • Ubuntu 20.04 LTS 64-bit

Running applications on host platforms

Qt Quick Ultralite applications can be run on host platforms to avoid having to flash the board too often and save time during development, or when a board is not available. The supported configurations are:

Operating SystemArchitectureCompiler
Windows 10x86_64MSVC 2019, MinGW 11.2
Ubuntu 20.04 LTSx86_64GNU Arm GCC 8, GNU Arm GCC 9, GNU Arm GCC 10

If you need to run applications for other host architectures or operating systems, build and install a custom Qt platform library. See Building Qt Quick Ultralite platform library against the evaluation packages for more information.

Available under certain Qt licenses.
Find out more.