QXYSeries#

The QXYSeries class is a base class for line, spline, and scatter series. More…

Inherited by: QScatterSeries, QLineSeries, QSplineSeries

Synopsis#

Properties#

bestFitLineColor - Color of best fit line
bestFitLineVisible - Visibility of the best fit line
color - Of the series
pointLabelsClipping - Clipping for data point labels
pointLabelsColor - Color used for data point labels. By default, the color is the color of the brush defined in theme for labels
pointLabelsFont - Font used for data point labels
pointLabelsFormat - Format used for showing labels with data points
pointLabelsVisible - Visibility of data point labels
pointsVisible - Whether the data points are visible and should be drawn
selectedColor - Color of the selected points

Functions#

def append (point)
def append (points)
def append (x, y)
def appendNp (x, y)
def at (index)
def bestFitLineColor ()
def bestFitLineEquation (ok)
def bestFitLinePen ()
def bestFitLineVisible ()
def brush ()
def clear ()
def clearPointConfiguration (index)
def clearPointConfiguration (index, key)
def clearPointsConfiguration ()
def clearPointsConfiguration (key)
def colorBy (sourceData[, gradient=QLinearGradient()])
def count ()
def deselectAllPoints ()
def deselectPoint (index)
def deselectPoints (indexes)
def insert (index, point)
def isPointSelected (index)
def lightMarker ()
def markerSize ()
def __lshift__ (points)
def __lshift__ (point)
def pen ()
def pointConfiguration (index)
def pointLabelsClipping ()
def pointLabelsColor ()
def pointLabelsFont ()
def pointLabelsFormat ()
def pointLabelsVisible ()
def points ()
def pointsConfiguration ()
def pointsVector ()
def pointsVisible ()
def remove (point)
def remove (index)
def remove (x, y)
def removePoints (index, count)
def replace (oldPoint, newPoint)
def replace (oldX, oldY, newX, newY)
def replace (index, newX, newY)
def replace (index, newPoint)
def replace (points)
def replaceNp (x, y)
def selectAllPoints ()
def selectPoint (index)
def selectPoints (indexes)
def selectedColor ()
def selectedLightMarker ()
def selectedPoints ()
def setBestFitLineColor (color)
def setBestFitLinePen (pen)
def setBestFitLineVisible ([visible=true])
def setLightMarker (lightMarker)
def setMarkerSize (size)
def setPointConfiguration (index, configuration)
def setPointConfiguration (index, key, value)
def setPointLabelsClipping ([enabled=true])
def setPointLabelsColor (color)
def setPointLabelsFont (font)
def setPointLabelsFormat (format)
def setPointLabelsVisible ([visible=true])
def setPointSelected (index, selected)
def setPointsConfiguration (pointsConfiguration)
def setPointsVisible ([visible=true])
def setSelectedColor (color)
def setSelectedLightMarker (selectedLightMarker)
def sizeBy (sourceData, minSize, maxSize)
def toggleSelection (indexes)

Virtual functions#

def color ()
def setBrush (brush)
def setColor (color)
def setPen (pen)

Signals#

def bestFitLineColorChanged (color)
def bestFitLinePenChanged (pen)
def bestFitLineVisibilityChanged (visible)
def clicked (point)
def colorChanged (color)
def doubleClicked (point)
def hovered (point, state)
def lightMarkerChanged (lightMarker)
def markerSizeChanged (size)
def penChanged (pen)
def pointAdded (index)
def pointLabelsClippingChanged (clipping)
def pointLabelsColorChanged (color)
def pointLabelsFontChanged (font)
def pointLabelsFormatChanged (format)
def pointLabelsVisibilityChanged (visible)
def pointRemoved (index)
def pointReplaced (index)
def pointsConfigurationChanged (configuration)
def pointsRemoved (index, count)
def pointsReplaced ()
def pressed (point)
def released (point)
def selectedColorChanged (color)
def selectedLightMarkerChanged (selectedLightMarker)
def selectedPointsChanged ()

Note

This documentation may contain snippets that were automatically translated from C++ to Python. We always welcome contributions to the snippet translation. If you see an issue with the translation, you can also let us know by creating a ticket on https:/bugreports.qt.io/projects/PYSIDE

Detailed Description#

QXYSeries supports displaying best fit line on a chart. Best fit line is a line through a chart that expresses the relationship between points.

class PySide6.QtCharts.QXYSeries#

Note

Properties can be used directly when from __feature__ import true_property is used or via accessor functions otherwise.

property PᅟySide6.QtCharts.QXYSeries.bestFitLineColor: PySide6.QtGui.QColor#

This property holds The color of best fit line..

See also

bestFitLineEquation bestFitLineVisible

Access functions:

bestFitLineColor ()
setBestFitLineColor (color)
Signal bestFitLineColorChanged (color)

property PᅟySide6.QtCharts.QXYSeries.bestFitLineVisible: bool#

This property holds The visibility of the best fit line..

This property is false by default.

See also

bestFitLineEquation

Access functions:

bestFitLineVisible ()
setBestFitLineVisible ([visible=true])
Signal bestFitLineVisibilityChanged (visible)

property PᅟySide6.QtCharts.QXYSeries.color: PySide6.QtGui.QColor#

This property holds The color of the series..

This is the line (pen) color in case of QLineSeries or QSplineSeries and the fill (brush) color in case of QScatterSeries or QAreaSeries .

See also

pen() brush()

Access functions:

color ()
setColor (color)
Signal colorChanged (color)

property PᅟySide6.QtCharts.QXYSeries.pointLabelsClipping: bool#

This property holds The clipping for data point labels..

This property is true by default. The labels on the edge of the plot area are cut when clipping is enabled.

See also

pointLabelsVisible

Access functions:

pointLabelsClipping ()
setPointLabelsClipping ([enabled=true])
Signal pointLabelsClippingChanged (clipping)

property PᅟySide6.QtCharts.QXYSeries.pointLabelsColor: PySide6.QtGui.QColor#

This property holds The color used for data point labels. By default, the color is the color of the brush defined in theme for labels..

See also

pointLabelsFormat

Access functions:

pointLabelsColor ()
setPointLabelsColor (color)
Signal pointLabelsColorChanged (color)

property PᅟySide6.QtCharts.QXYSeries.pointLabelsFont: PySide6.QtGui.QFont#

This property holds The font used for data point labels..

See also

pointLabelsFormat

Access functions:

pointLabelsFont ()
setPointLabelsFont (font)
Signal pointLabelsFontChanged (font)

property PᅟySide6.QtCharts.QXYSeries.pointLabelsFormat: str#

This property holds The format used for showing labels with data points..

QXYSeries supports the following format tags:

@index

The index in the series of the data point. [since 6.5]

@xPoint

The x-coordinate of the data point.

@yPoint

The y-coordinate of the data point.

For example, the following usage of the format tags would produce labels that display the data point shown inside brackets separated by a comma (x, y):

series->setPointLabelsFormat("@index: (@xPoint, @yPoint)");

By default, the labels’ format is set to @xPoint, @yPoint. The labels are shown on the plot area, and the labels on the edge of the plot area are cut. If the points are close to each other, the labels may overlap.

See also

pointLabelsVisible pointLabelsFont pointLabelsColor

Access functions:

pointLabelsFormat ()
setPointLabelsFormat (format)
Signal pointLabelsFormatChanged (format)

property PᅟySide6.QtCharts.QXYSeries.pointLabelsVisible: bool#

This property holds The visibility of data point labels..

This property is false by default.

See also

pointLabelsFormat pointLabelsClipping

Access functions:

pointLabelsVisible ()
setPointLabelsVisible ([visible=true])
Signal pointLabelsVisibilityChanged (visible)

property PᅟySide6.QtCharts.QXYSeries.pointsVisible: bool#

This property holds Whether the data points are visible and should be drawn..

Access functions:

pointsVisible ()
setPointsVisible ([visible=true])

property PᅟySide6.QtCharts.QXYSeries.selectedColor: PySide6.QtGui.QColor#

This property holds The color of the selected points..

This is the fill (brush) color of points marked as selected. If not specified, value of color is used as default.

See also

color

Access functions:

color ()
setSelectedColor (color)
Signal selectedColorChanged (color)

PySide6.QtCharts.QXYSeries.PointConfiguration#

This enum value describes the particular configuration of a point.

Constant

Description

QXYSeries.PointConfiguration.Color

This enum value can be used to change a point’s color. If used together with setPointConfiguration , the configuration’s value should be a valid QColor .

QXYSeries.PointConfiguration.Size

This enum value can be used to change a point’s size. If used together with setPointConfiguration , the configuration’s value should be a number, such as qreal or int.

QXYSeries.PointConfiguration.Visibility

This enum value can be used to hide or show the point. If used together with setPointConfiguration , the configuration’s value should be boolean.

QXYSeries.PointConfiguration.LabelVisibility

This enum value can be used to hide or show the label of the point. If used together with setPointConfiguration , the configuration’s value should be boolean.

QXYSeries.PointConfiguration.LabelFormat

This enum value can be used to set custom label text per-point. If used together with setPointConfiguration , the configuration’s value should be a string.

Constant	Description
QXYSeries.PointConfiguration.Color	This enum value can be used to change a point’s color. If used together with `setPointConfiguration` , the configuration’s value should be a valid `QColor` .
QXYSeries.PointConfiguration.Size	This enum value can be used to change a point’s size. If used together with `setPointConfiguration` , the configuration’s value should be a number, such as `qreal` or `int`.
QXYSeries.PointConfiguration.Visibility	This enum value can be used to hide or show the point. If used together with `setPointConfiguration` , the configuration’s value should be boolean.
QXYSeries.PointConfiguration.LabelVisibility	This enum value can be used to hide or show the label of the point. If used together with `setPointConfiguration` , the configuration’s value should be boolean.
QXYSeries.PointConfiguration.LabelFormat	This enum value can be used to set custom label text per-point. If used together with `setPointConfiguration` , the configuration’s value should be a string.

Note

If an empty string is set as the LabelFormat, it will be ignored, and the series pointLabelsFormat will be used.

PySide6.QtCharts.QXYSeries.append(point)#

Parameters:: point – PySide6.QtCore.QPointF

This is an overloaded function.

Adds the data point point to the series.

PySide6.QtCharts.QXYSeries.append(points)

Parameters:: points –

This is an overloaded function.

Adds the list of data points specified by points to the series.

PySide6.QtCharts.QXYSeries.append(x, y)

Parameters:

x – float
y – float

Adds the data point with the coordinates x and y to the series.

PySide6.QtCharts.QXYSeries.appendNp(x, y)#

Parameters:

x – PyArrayObject
y – PyArrayObject

Adds the list of data points specified by two one-dimensional, equally sized numpy arrays representing the x, y values, respectively.

PySide6.QtCharts.QXYSeries.at(index)#

Parameters:: index – int
Return type:: PySide6.QtCore.QPointF

Returns the data point at the position specified by index in the internal series of points.

PySide6.QtCharts.QXYSeries.bestFitLineColor()#

Return type:: PySide6.QtGui.QColor

See also

setBestFitLineColor()

Getter of property bestFitLineColor .

PySide6.QtCharts.QXYSeries.bestFitLineColorChanged(color)#

Parameters:: color – PySide6.QtGui.QColor

This signal is emitted when the color used for the best fit line changes to color.

Notification signal of property bestFitLineColor .

PySide6.QtCharts.QXYSeries.bestFitLineEquation(ok)#

Parameters:: ok – bool
Return type:

Returns a pair of numbers where the first number is a slope factor and the second number is intercept of a linear function for a best fit line.

Those factors are calculated using Least Squares Method based on points passed to the series.

Parameter ok is used to report a failure by setting its value to false and to report a success by setting its value to true.

See also

bestFitLineVisible()

PySide6.QtCharts.QXYSeries.bestFitLinePen()#

Return type:: PySide6.QtGui.QPen

PySide6.QtCharts.QXYSeries.bestFitLinePenChanged(pen)#

Parameters:: pen – PySide6.QtGui.QPen

PySide6.QtCharts.QXYSeries.bestFitLineVisibilityChanged(visible)#

Parameters:: visible – bool

This signal is emitted when the visibility of the best fit line changes to visible.

Notification signal of property bestFitLineVisible .

PySide6.QtCharts.QXYSeries.bestFitLineVisible()#

Return type:: bool

See also

setBestFitLineVisible()

Getter of property bestFitLineVisible .

PySide6.QtCharts.QXYSeries.brush()#

Return type:: PySide6.QtGui.QBrush

Returns the brush used to fill the data points for the series.

See also

setBrush()

PySide6.QtCharts.QXYSeries.clear()#

Removes all points from the series.

See also

pointsRemoved()

PySide6.QtCharts.QXYSeries.clearPointConfiguration(index)#

Parameters:: index – int

Removes the configuration of a point located at index and restores the default look derived from the series’ settings.

Note

It doesn’t affect the configuration of other points.

PySide6.QtCharts.QXYSeries.clearPointConfiguration(index, key)

Parameters:

index – int
key – PointConfiguration

Removes the configuration property identified by key from the point at index and restores the default look derived from the series’ settings.

Removes the configuration type, such as color or size, specified by key from the point at index with configuration customizations, allowing that configuration property to be rendered as the default specified in the series’ properties.

Note

It doesn’t affect the configuration of other points.

PySide6.QtCharts.QXYSeries.clearPointsConfiguration()#

Removes the configuration of all points in the series and restores the default look derived from the series’ settings.

See also

setPointConfiguration()

PySide6.QtCharts.QXYSeries.clearPointsConfiguration(key)

Parameters:: key – PointConfiguration

Removes the configuration property identified by key from all points and restores the default look derived from the series’ settings.

Removes the configuration type, such as color or size, specified by key from all points with configuration customizations, allowing that configuration property to be rendered as the default specified in the series properties.

See also

clearPointsConfiguration() setPointConfiguration()

PySide6.QtCharts.QXYSeries.clicked(point)#

Parameters:: point – PySide6.QtCore.QPointF

This signal is emitted when the user triggers a mouse event by clicking the point point in the chart.

See also

pressed() released() doubleClicked()

PySide6.QtCharts.QXYSeries.color()#

Return type:: PySide6.QtGui.QColor

See also

setColor()

Getter of property color .

PySide6.QtCharts.QXYSeries.colorBy(sourceData[, gradient=QLinearGradient()])#

Parameters:

sourceData –
gradient – PySide6.QtGui.QLinearGradient

Sets the points’ color according to a passed list of values. Values from sourceData are sorted and mapped to the gradient.

If the series has a QColorAxis attached, then a gradient from the axis is going to be used.

See also

setPointConfiguration() pointConfiguration() QColorAxis

PySide6.QtCharts.QXYSeries.colorChanged(color)#

Parameters:: color – PySide6.QtGui.QColor

This signal is emitted when the line (pen) color changes to color.

Notification signal of property color .

PySide6.QtCharts.QXYSeries.count()#

Return type:: int

Returns the number of data points in a series.

PySide6.QtCharts.QXYSeries.deselectAllPoints()#

Deselects all points in the series.

Note

Emits selectedPointsChanged

See also

setPointSelected()

PySide6.QtCharts.QXYSeries.deselectPoint(index)#

Parameters:: index – int

Deselects point at given index.

Note

Emits selectedPointsChanged

See also

setPointSelected()

PySide6.QtCharts.QXYSeries.deselectPoints(indexes)#

Parameters:: indexes –

Marks multiple points passed in a indexes list as deselected.

Note

Emits selectedPointsChanged

See also

setPointSelected()

PySide6.QtCharts.QXYSeries.doubleClicked(point)#

Parameters:: point – PySide6.QtCore.QPointF

This signal is emitted when the user double-clicks the data point point in the chart. The point is the point where the first press was triggered.

See also

pressed() released() clicked()

PySide6.QtCharts.QXYSeries.hovered(point, state)#

Parameters:

point – PySide6.QtCore.QPointF
state – bool

This signal is emitted when a mouse is hovered over the point point in the chart. When the mouse moves over the point, state turns true, and when the mouse moves away again, it turns false.

PySide6.QtCharts.QXYSeries.insert(index, point)#

Parameters:

index – int
point – PySide6.QtCore.QPointF

Inserts the data point point in the series at the position specified by index.

See also

pointAdded()

PySide6.QtCharts.QXYSeries.isPointSelected(index)#

Parameters:: index – int
Return type:: bool

Returns true if point at given index is among selected points and false otherwise.

Note

Selected points are drawn using the selected color if it was specified.

PySide6.QtCharts.QXYSeries.lightMarker()#

Return type:: PySide6.QtGui.QImage

Gets the image used for drawing markers on each point of the series.

The default value is QImage(), meaning no light marker will be painted.

The light markers visualize the data points of this series and as such are an alternative to setPointsVisible (true). Both features can be enabled independently from each other.

Unlike the elements of QScatterSeries the light markers are not represented by QGraphicsItem , but are just painted (no objects created). However, the mouse-event-signals of QXYSeries behave the same way, meaning that you’ll get the exact domain value of the point if you click/press/hover the light marker. You’ll still get the in between domain value if you click on the line. The light markers are above the line in terms of painting as well as events.

See also

setLightMarker()

PySide6.QtCharts.QXYSeries.lightMarkerChanged(lightMarker)#

Parameters:: lightMarker – PySide6.QtGui.QImage

This signal is emitted when the light marker image changes to lightMarker.

See also

setLightMarker()

PySide6.QtCharts.QXYSeries.markerSize()#

Return type:: float

Gets the size of the marker used to render points in the series.

The default size depends on the specific QXYSeries type. QScatterSeries has a default of 15.0 QLineSeries has a default of the series pen size * 1.5

See also

setMarkerSize() markerSize

PySide6.QtCharts.QXYSeries.markerSizeChanged(size)#

Parameters:: size – float

This signal is emitted when the marker size changes to size.

PySide6.QtCharts.QXYSeries.__lshift__(points)#

Parameters:: points –
Return type:: PySide6.QtCharts.QXYSeries

Stream operator for adding the list of data points specified by points to the series.

See also

append()

PySide6.QtCharts.QXYSeries.__lshift__(point)

Parameters:: point – PySide6.QtCore.QPointF
Return type:: PySide6.QtCharts.QXYSeries

Stream operator for adding the data point point to the series.

See also

append()

PySide6.QtCharts.QXYSeries.pen()#

Return type:: PySide6.QtGui.QPen

Returns the pen used to draw the outline of the data points for the series.

See also

setPen()

PySide6.QtCharts.QXYSeries.penChanged(pen)#

Parameters:: pen – PySide6.QtGui.QPen

This signal is emitted when the pen changes to pen.

PySide6.QtCharts.QXYSeries.pointAdded(index)#

Parameters:: index – int

This signal is emitted when a point is added at the position specified by index.

See also

append() insert()

PySide6.QtCharts.QXYSeries.pointConfiguration(index)#

Parameters:: index – int
Return type:

Returns a map representing the configuration of a point at index.

With points configuration you can change various aspects of each point’s look.

See also

setPointConfiguration()

PySide6.QtCharts.QXYSeries.pointLabelsClipping()#

Return type:: bool

See also

setPointLabelsClipping()

Getter of property pointLabelsClipping .

PySide6.QtCharts.QXYSeries.pointLabelsClippingChanged(clipping)#

Parameters:: clipping – bool

This signal is emitted when the clipping of the data point labels changes to clipping.

Notification signal of property pointLabelsClipping .

PySide6.QtCharts.QXYSeries.pointLabelsColor()#

Return type:: PySide6.QtGui.QColor

See also

setPointLabelsColor()

Getter of property pointLabelsColor .

PySide6.QtCharts.QXYSeries.pointLabelsColorChanged(color)#

Parameters:: color – PySide6.QtGui.QColor

This signal is emitted when the color used for data point labels changes to color.

Notification signal of property pointLabelsColor .

PySide6.QtCharts.QXYSeries.pointLabelsFont()#

Return type:: PySide6.QtGui.QFont

See also

setPointLabelsFont()

Getter of property pointLabelsFont .

PySide6.QtCharts.QXYSeries.pointLabelsFontChanged(font)#

Parameters:: font – PySide6.QtGui.QFont

This signal is emitted when the font used for data point labels changes to font.

Notification signal of property pointLabelsFont .

PySide6.QtCharts.QXYSeries.pointLabelsFormat()#

Return type:: str

See also

setPointLabelsFormat()

Getter of property pointLabelsFormat .

PySide6.QtCharts.QXYSeries.pointLabelsFormatChanged(format)#

Parameters:: format – str

This signal is emitted when the format of data point labels changes to format.

Notification signal of property pointLabelsFormat .

PySide6.QtCharts.QXYSeries.pointLabelsVisibilityChanged(visible)#

Parameters:: visible – bool

This signal is emitted when the visibility of the data point labels changes to visible.

Notification signal of property pointLabelsVisible .

PySide6.QtCharts.QXYSeries.pointLabelsVisible()#

Return type:: bool

See also

setPointLabelsVisible()

Getter of property pointLabelsVisible .

PySide6.QtCharts.QXYSeries.pointRemoved(index)#

Parameters:: index – int

This signal is emitted when a point is removed from the position specified by index.

See also

remove()

PySide6.QtCharts.QXYSeries.pointReplaced(index)#

Parameters:: index – int

This signal is emitted when a point is replaced at the position specified by index.

See also

replace()

PySide6.QtCharts.QXYSeries.points()#

Return type:

Returns the points in the series.

PySide6.QtCharts.QXYSeries.pointsConfiguration()#

Return type:

Returns a map with points’ indexes as keys and points’ configuration as values.

See also

setPointsConfiguration() setPointConfiguration() pointConfiguration()

PySide6.QtCharts.QXYSeries.pointsConfigurationChanged(configuration)#

Parameters:: configuration –

PySide6.QtCharts.QXYSeries.pointsRemoved(index, count)#

Parameters:

index – int
count – int

This signal is emitted when the number of points specified by count is removed starting at the position specified by index.

See also

removePoints() clear()

PySide6.QtCharts.QXYSeries.pointsReplaced()#

This signal is emitted when all points are replaced with other points.

See also

replace()

PySide6.QtCharts.QXYSeries.pointsVector()#

Return type:

Note

This function is deprecated.

Use points() instead. Returns the points in the series.

PySide6.QtCharts.QXYSeries.pointsVisible()#

Return type:: bool

See also

setPointsVisible()

Getter of property pointsVisible .

PySide6.QtCharts.QXYSeries.pressed(point)#

Parameters:: point – PySide6.QtCore.QPointF

This signal is emitted when the user presses the data point point in the chart and holds down the mouse button.

See also

clicked() released() doubleClicked()

PySide6.QtCharts.QXYSeries.released(point)#

Parameters:: point – PySide6.QtCore.QPointF

This signal is emitted when the user releases the mouse press on the data point specified by point.

See also

pressed() clicked() doubleClicked()

PySide6.QtCharts.QXYSeries.remove(point)#

Parameters:: point – PySide6.QtCore.QPointF

Removes the data point point from the series.

See also

pointRemoved()

PySide6.QtCharts.QXYSeries.remove(index)

Parameters:: index – int

Removes the point at the position specified by index from the series.

See also

pointRemoved()

PySide6.QtCharts.QXYSeries.remove(x, y)

Parameters:

x – float
y – float

Removes the point that has the coordinates x and y from the series.

See also

pointRemoved()

PySide6.QtCharts.QXYSeries.removePoints(index, count)#

Parameters:

index – int
count – int

Removes the number of points specified by count from the series starting at the position specified by index.

See also

pointsRemoved()

PySide6.QtCharts.QXYSeries.replace(oldPoint, newPoint)#

Parameters:

oldPoint – PySide6.QtCore.QPointF
newPoint – PySide6.QtCore.QPointF

Replaces the point specified by oldPoint with the one specified by newPoint.

See also

pointReplaced()

PySide6.QtCharts.QXYSeries.replace(oldX, oldY, newX, newY)

Parameters:

oldX – float
oldY – float
newX – float
newY – float

Replaces the point with the coordinates oldX and oldY with the point with the coordinates newX and newY. Does nothing if the old point does not exist.

See also

pointReplaced()

PySide6.QtCharts.QXYSeries.replace(index, newX, newY)

Parameters:

index – int
newX – float
newY – float

Replaces the point at the position specified by index with the point that has the coordinates newX and newY.

See also

pointReplaced()

PySide6.QtCharts.QXYSeries.replace(index, newPoint)

Parameters:

index – int
newPoint – PySide6.QtCore.QPointF

Replaces the point at the position specified by index with the point specified by newPoint.

See also

pointReplaced()

PySide6.QtCharts.QXYSeries.replace(points)

Parameters:: points –

Replaces the current points with the points specified by points.

Note

This is much faster than replacing data points one by one, or first clearing all data, and then appending the new data. Emits pointsReplaced() when the points have been replaced.

See also

pointsReplaced()

PySide6.QtCharts.QXYSeries.replaceNp(x, y)#

Parameters:

x – PyArrayObject
y – PyArrayObject

Replaces the current points with the points specified by two one-dimensional, equally sized numpy arrays representing the x, y values, respectively.

PySide6.QtCharts.QXYSeries.selectAllPoints()#

Marks all points in the series as selected,

Note

Emits selectedPointsChanged

See also

setPointSelected()

PySide6.QtCharts.QXYSeries.selectPoint(index)#

Parameters:: index – int

Marks point at index as selected.

Note

Emits selectedPointsChanged

See also

setPointSelected()

PySide6.QtCharts.QXYSeries.selectPoints(indexes)#

Parameters:: indexes –

Marks multiple points passed in a indexes list as selected.

Note

Emits selectedPointsChanged

See also

setPointSelected()

PySide6.QtCharts.QXYSeries.selectedColor()#

Return type:: PySide6.QtGui.QColor

PySide6.QtCharts.QXYSeries.selectedColorChanged(color)#

Parameters:: color – PySide6.QtGui.QColor

Notification signal of property selectedColor .

PySide6.QtCharts.QXYSeries.selectedLightMarker()#

Return type:: PySide6.QtGui.QImage

Returns the image used for drawing markers on selected series’ points.

The default value is QImage(), meaning usual lightMarker() will be painted.

This is equivalent to selectedColor if you prefer light markers over normal points, but still want to distinguish selected points.

See also

setSelectedLightMarker() lightMarker() selectedColor setPointSelected()

PySide6.QtCharts.QXYSeries.selectedLightMarkerChanged(selectedLightMarker)#

Parameters:: selectedLightMarker – PySide6.QtGui.QImage

PySide6.QtCharts.QXYSeries.selectedPoints()#

Return type:

Returns a list of points indexes marked as selected. Selected points are visible regardless of points visibility.

See also

setPointSelected() pointsVisible()

PySide6.QtCharts.QXYSeries.selectedPointsChanged()#

This signal is emitted when the points selection changes.

PySide6.QtCharts.QXYSeries.setBestFitLineColor(color)#

Parameters:: color – PySide6.QtGui.QColor

See also

bestFitLineColor()

Setter of property bestFitLineColor .

PySide6.QtCharts.QXYSeries.setBestFitLinePen(pen)#

Parameters:: pen – PySide6.QtGui.QPen

PySide6.QtCharts.QXYSeries.setBestFitLineVisible([visible=true])#

Parameters:: visible – bool

See also

bestFitLineVisible()

Setter of property bestFitLineVisible .

PySide6.QtCharts.QXYSeries.setBrush(brush)#

Parameters:: brush – PySide6.QtGui.QBrush

Sets the brush used for drawing points on the chart to brush. If the brush is not defined, the brush from the chart theme setting is used.

See also

brush() setTheme()

PySide6.QtCharts.QXYSeries.setColor(color)#

Parameters:: color – PySide6.QtGui.QColor

See also

color()

Setter of property color .

PySide6.QtCharts.QXYSeries.setLightMarker(lightMarker)#

Parameters:: lightMarker – PySide6.QtGui.QImage

Sets the image used for drawing markers on each point of the series as the value of lightMarker.

The default value is a default-QImage() ( isNull() == true), meaning no light marker will be painted. You can reset back to default (disabled) by calling this function with a null QImage (QImage()).

The light markers visualize the data points of this series and as such are an alternative to setPointsVisible(true). If a light marker is set with this method, visible points as set with setPointsVisible(true) are not displayed.

See also

lightMarker()

PySide6.QtCharts.QXYSeries.setMarkerSize(size)#

Parameters:: size – float

Sets the size of the marker used to render points in the series.

The default size is 15.0.

See also

markerSize

PySide6.QtCharts.QXYSeries.setPen(pen)#

Parameters:: pen – PySide6.QtGui.QPen

Sets the pen used for drawing points on the chart to pen. If the pen is not defined, the pen from the chart theme is used.

See also

pen() setTheme()

PySide6.QtCharts.QXYSeries.setPointConfiguration(index, configuration)#

Parameters:

index – int
configuration –

Enables customizing the appearance of a point located at index with desired configuration.

With points configuration you can change various aspects of every point’s appearance.

A point’s configuration is represented as a hash map with pointConfiguration keys and QVariant values. For example:

QLineSeries *series = new QLineSeries();
series->setName("Customized series");
series->setPointsVisible(true);

*series << QPointF(0, 6) << QPointF(2, 4) << QPointF(3, 6) << QPointF(7, 4) << QPointF(10, 5)
        << QPointF(11, 1) << QPointF(13, 3) << QPointF(17, 6) << QPointF(18, 3)
        << QPointF(20, 2);

QChart *chart = new QChart();
chart->addSeries(series);
chart->createDefaultAxes();

QHash<QXYSeries::PointConfiguration, QVariant> conf;
conf[QXYSeries::PointConfiguration::Color] = QColor(Qt::red);
conf[QXYSeries::PointConfiguration::Size] = 8;
conf[QXYSeries::PointConfiguration::LabelVisibility] = true;

series->setPointConfiguration(4, conf);

conf.remove(QXYSeries::PointConfiguration::Color);
conf[QXYSeries::PointConfiguration::LabelFormat] = "This Point";
series->setPointConfiguration(6, conf);

In this example, you can see a default QLineSeries with 10 points and with changed configuration of two points. Both changed points are visibly bigger than the others with a look derived from the series configuration. By default, points don’t have labels, but the point at index 4 has a label thanks to the LabelVisibility and LabelFormat configuration values. The point at index 6 has a custom label This Point thanks to the LabelFormat configuration value. Below is an example of a chart created in this way:

See also

pointConfiguration() pointsConfiguration() clearPointsConfiguration()

PySide6.QtCharts.QXYSeries.setPointConfiguration(index, key, value)

Parameters:

index – int
key – PointConfiguration
value – object

Enables customizing a particular aspect of a point’s configuration.

Note

Points configuration concept provides a flexible way to configure various aspects of a point’s appearance. Thus, values need to have an elastic type such as QVariant . See PointConfiguration to see what value should be passed for certain key.

See also

pointsConfiguration()

PySide6.QtCharts.QXYSeries.setPointLabelsClipping([enabled=true])#

Parameters:: enabled – bool

See also

pointLabelsClipping()

Setter of property pointLabelsClipping .

PySide6.QtCharts.QXYSeries.setPointLabelsColor(color)#

Parameters:: color – PySide6.QtGui.QColor

See also

pointLabelsColor()

Setter of property pointLabelsColor .

PySide6.QtCharts.QXYSeries.setPointLabelsFont(font)#

Parameters:: font – PySide6.QtGui.QFont

See also

pointLabelsFont()

Setter of property pointLabelsFont .

PySide6.QtCharts.QXYSeries.setPointLabelsFormat(format)#

Parameters:: format – str

See also

pointLabelsFormat()

Setter of property pointLabelsFormat .

PySide6.QtCharts.QXYSeries.setPointLabelsVisible([visible=true])#

Parameters:: visible – bool

See also

pointLabelsVisible()

Setter of property pointLabelsVisible .

PySide6.QtCharts.QXYSeries.setPointSelected(index, selected)#

Parameters:

index – int
selected – bool

Marks point at given index as either selected or deselected as specified by selected.

Note

Selected points are drawn using the selected color if it was specified. Emits selectedPointsChanged

PySide6.QtCharts.QXYSeries.setPointsConfiguration(pointsConfiguration)#

Parameters:: pointsConfiguration –

Enables customizing the configuration of multiple points as specified by pointsConfiguration.

See also

pointsConfiguration()

PySide6.QtCharts.QXYSeries.setPointsVisible([visible=true])#

Parameters:: visible – bool

See also

pointsVisible()

Setter of property pointsVisible .

PySide6.QtCharts.QXYSeries.setSelectedColor(color)#

Parameters:: color – PySide6.QtGui.QColor

Setter of property selectedColor .

PySide6.QtCharts.QXYSeries.setSelectedLightMarker(selectedLightMarker)#

Parameters:: selectedLightMarker – PySide6.QtGui.QImage

Sets the image used for drawing markers on selected series’s points to selectedLightMarker.

The default value is QImage(), meaning usual lightMarker() will be painted.

This is an equivalent for selectedColor if you prefer light markers over normal points, but still want to distinguish selected points.

See also

selectedLightMarker() lightMarker() selectedColor setPointSelected()

PySide6.QtCharts.QXYSeries.sizeBy(sourceData, minSize, maxSize)#

Parameters:

sourceData –
minSize – float
maxSize – float

Sets the points’ sizes according to a passed list of values. Values from sourceData are sorted and mapped to a point size which is between minSize and maxSize.

Note

If sourceData length is smaller than number of points in the series, then size of the points at the end of the series will stay the same.

PySide6.QtCharts.QXYSeries.toggleSelection(indexes)#

Parameters:: indexes –

Changes selection state of points at given indexes to the opposite one. Makes

Note

Emits selectedPointsChanged

See also

setPointSelected()

@index	The index in the series of the data point. [since 6.5]
@xPoint	The x-coordinate of the data point.
@yPoint	The y-coordinate of the data point.