QFontMetricsF¶

The QFontMetricsF class provides font metrics information. More…

Synopsis¶

Functions¶

def __eq__ (other)
def __ne__ (other)
def ascent ()
def averageCharWidth ()
def boundingRect (r, flags, string[, tabstops=0[, tabarray=None]])
def boundingRect (string)
def boundingRectChar (arg__1)
def capHeight ()
def descent ()
def elidedText (text, mode, width[, flags=0])
def fontDpi ()
def height ()
def horizontalAdvance (string[, length=-1])
def horizontalAdvanceChar (arg__1)
def inFont (arg__1)
def inFontUcs4 (ucs4)
def leading ()
def leftBearing (arg__1)
def lineSpacing ()
def lineWidth ()
def maxWidth ()
def minLeftBearing ()
def minRightBearing ()
def overlinePos ()
def rightBearing (arg__1)
def size (flags, str[, tabstops=0[, tabarray=None]])
def strikeOutPos ()
def swap (other)
def tightBoundingRect (text)
def underlinePos ()
def xHeight ()

Detailed Description¶

QFontMetricsF functions calculate the size of characters and strings for a given font. You can construct a QFontMetricsF object with an existing QFont to obtain metrics for that font. If the font is changed later, the font metrics object is not updated.

Once created, the object provides functions to access the individual metrics of the font, its characters, and for strings rendered in the font.

There are several functions that operate on the font: ascent() , descent() , height() , leading() and lineSpacing() return the basic size properties of the font. The underlinePos() , overlinePos() , strikeOutPos() and lineWidth() functions, return the properties of the line that underlines, overlines or strikes out the characters. These functions are all fast.

There are also some functions that operate on the set of glyphs in the font: minLeftBearing() , minRightBearing() and maxWidth() . These are by necessity slow, and we recommend avoiding them if possible.

For each character, you can get its horizontalAdvance() , leftBearing() , and rightBearing() , and find out whether it is in the font using inFont() . You can also treat the character as a string, and use the string functions on it.

The string functions include horizontalAdvance() , to return the width of a string in pixels (or points, for a printer), boundingRect() , to return a rectangle large enough to contain the rendered string, and size() , to return the size of that rectangle.

Example:

font = QFont("times", 24)
fm = QFontMetricsF(font)
pixelsWide = fm.horizontalAdvance("What's the width of self text?")
pixelsHigh = fm.height()

See also

QFont QFontInfo QFontDatabase

class PySide6.QtGui.QFontMetricsF(font)¶

PySide6.QtGui.QFontMetricsF(font, pd)

PySide6.QtGui.QFontMetricsF(arg__1)

PySide6.QtGui.QFontMetricsF(arg__1)

Parameters

font – PySide6.QtGui.QFont
pd – PySide6.QtGui.QPaintDevice
arg__1 – PySide6.QtGui.QFontMetrics

Constructs a font metrics object for font.

The font metrics will be compatible with the paintdevice used to create font.

The font metrics object holds the information for the font that is passed in the constructor at the time it is created, and is not updated if the font’s attributes are changed later.

Use QFontMetricsF (const QFont &, QPaintDevice *) to get the font metrics that are compatible with a certain paint device.

Constructs a font metrics object for font and paintdevice.

The font metrics will be compatible with the paintdevice passed. If the paintdevice is None, the metrics will be screen-compatible, ie. the metrics you get if you use the font for drawing text on a widgets or pixmaps , not on a QPicture or QPrinter .

The font metrics object holds the information for the font that is passed in the constructor at the time it is created, and is not updated if the font’s attributes are changed later.

Constructs a font metrics object with floating point precision from the given fontMetrics object.

Constructs a copy of fm.

PySide6.QtGui.QFontMetricsF.ascent()¶

Return type: float

Returns the ascent of the font.

The ascent of a font is the distance from the baseline to the highest position characters extend to. In practice, some font designers break this rule, e.g. when they put more than one accent on top of a character, or to accommodate a certain character, so it is possible (though rare) that this value will be too small.

See also

descent()

PySide6.QtGui.QFontMetricsF.averageCharWidth()¶

Return type: float

Returns the average width of glyphs in the font.

PySide6.QtGui.QFontMetricsF.boundingRect(r, flags, string[, tabstops=0[, tabarray=None]])¶

Parameters

r – PySide6.QtCore.QRectF
flags – int
string – str
tabstops – int
tabarray – int

Return type

PySide6.QtCore.QRectF

This is an overloaded function.

Returns the bounding rectangle of the characters in the given text. This is the set of pixels the text would cover if drawn when constrained to the bounding rectangle specified by rect. If rect is a reference to a None object, e.g. when passing a default constructed QRectF , the bounding rectangle will not constrain itself to the size.

The flags argument is the bitwise OR of the following flags:

AlignLeft aligns to the left border, except for Arabic and Hebrew where it aligns to the right.

AlignRight aligns to the right border, except for Arabic and Hebrew where it aligns to the left.

AlignJustify produces justified text.

AlignHCenter aligns horizontally centered.

AlignTop aligns to the top border.

AlignBottom aligns to the bottom border.

AlignVCenter aligns vertically centered

AlignCenter (== Qt::AlignHCenter | Qt::AlignVCenter)

TextSingleLine ignores newline characters in the text.

TextExpandTabs expands tabs (see below)

TextShowMnemonic interprets “&x” as x; i.e., underlined.

TextWordWrap breaks the text to fit the rectangle.

Horizontal alignment defaults to AlignLeft and vertical alignment defaults to AlignTop .

If several of the horizontal or several of the vertical alignment flags are set, the resulting alignment is undefined.

These flags are defined in AlignmentFlag .

If TextExpandTabs is set in flags, the following behavior is used to interpret tab characters in the text:

If tabArray is non-null, it specifies a 0-terminated sequence of pixel-positions for tabs in the text.

If tabStops is non-zero, it is used as the tab spacing (in pixels).

Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts.

Newline characters are processed as line breaks.

Despite the different actual character heights, the heights of the bounding rectangles of “Yes” and “yes” are the same.

The bounding rectangle returned by this function is somewhat larger than that calculated by the simpler boundingRect() function. This function uses the maximum left and right font bearings as is necessary for multi-line text to align correctly. Also, fontHeight() and lineSpacing() are used to calculate the height, rather than individual character heights.

See also

horizontalAdvance() boundingRect() Alignment

PySide6.QtGui.QFontMetricsF.boundingRect(string)

Parameters: string – str
Return type: PySide6.QtCore.QRectF

Returns the bounding rectangle of the characters in the string specified by text. The bounding rectangle always covers at least the set of pixels the text would cover if drawn at (0, 0).

Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the width of the returned rectangle might be different than what the horizontalAdvance() method returns.

If you want to know the advance width of the string (to lay out a set of strings next to each other), use horizontalAdvance() instead.

Newline characters are processed as normal characters, not as linebreaks.

The height of the bounding rectangle is at least as large as the value returned height() .

See also

horizontalAdvance() height() boundingRect()

PySide6.QtGui.QFontMetricsF.boundingRectChar(arg__1)¶

Parameters: arg__1 – QChar
Return type: PySide6.QtCore.QRectF

Returns the bounding rectangle of the character ch relative to the left-most point on the base line.

Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the text output may cover all pixels in the bounding rectangle.

Note that the rectangle usually extends both above and below the base line.

See also

horizontalAdvance()

PySide6.QtGui.QFontMetricsF.capHeight()¶

Return type: float

Returns the cap height of the font.

The cap height of a font is the height of a capital letter above the baseline. It specifically is the height of capital letters that are flat - such as H or I - as opposed to round letters such as O, or pointed letters like A, both of which may display overshoot.

See also

ascent()

PySide6.QtGui.QFontMetricsF.descent()¶

Return type: float

Returns the descent of the font.

The descent is the distance from the base line to the lowest point characters extend to. (Note that this is different from X, which adds 1 pixel.) In practice, some font designers break this rule, e.g. to accommodate a certain character, so it is possible (though rare) that this value will be too small.

See also

ascent()

PySide6.QtGui.QFontMetricsF.elidedText(text, mode, width[, flags=0])¶

Parameters

text – str
mode – TextElideMode
width – float
flags – int

Return type

str

If the string text is wider than width, returns an elided version of the string (i.e., a string with “…” in it). Otherwise, returns the original string.

The mode parameter specifies whether the text is elided on the left (for example, “…tech”), in the middle (for example, “Tr…ch”), or on the right (for example, “Trol…”).

The width is specified in pixels, not characters.

The flags argument is optional and currently only supports TextShowMnemonic as value.

The elide mark follows the layoutdirection . For example, it will be on the right side of the text for right-to-left layouts if the mode is Qt::ElideLeft, and on the left side of the text if the mode is Qt::ElideRight.

PySide6.QtGui.QFontMetricsF.fontDpi()¶

Return type: float

Returns the font DPI.

PySide6.QtGui.QFontMetricsF.height()¶

Return type: float

Returns the height of the font.

This is always equal to ascent() + descent() .

See also

leading() lineSpacing()

PySide6.QtGui.QFontMetricsF.horizontalAdvance(string[, length=-1])¶

Parameters

string – str
length – int

Return type

float

Returns the horizontal advance in pixels of the first length characters of text. If length is negative (the default), the entire string is used.

The advance is the distance appropriate for drawing a subsequent character after text.

See also

boundingRect()

PySide6.QtGui.QFontMetricsF.horizontalAdvanceChar(arg__1)¶

Parameters: arg__1 – QChar
Return type: float

This is an overloaded function.

Returns the horizontal advance of character ch in pixels. This is a distance appropriate for drawing a subsequent character after ch.

Some of the metrics are described in the image to the right. The central dark rectangles cover the logical horizontalAdvance() of each character. The outer pale rectangles cover the leftBearing() and rightBearing() of each character. Notice that the bearings of “f” in this particular font are both negative, while the bearings of “o” are both positive.

Warning

This function will produce incorrect results for Arabic characters or non-spacing marks in the middle of a string, as the glyph shaping and positioning of marks that happens when processing strings cannot be taken into account. When implementing an interactive text control, use QTextLayout instead.

Table of Contents

Previous topic

Next topic

QFontMetricsF¶

Synopsis¶

Functions¶

Detailed Description¶