QCompassReading

The QCompassReading class represents one reading from a compass. More

Inheritance diagram of PySide6.QtSensors.QCompassReading

Synopsis

Functions

Detailed Description

QCompassReading Units

The compass returns the azimuth of the device as degrees from magnetic north in a clockwise direction based on the top of the device, as defined by nativeOrientation . There is also a value to indicate the calibration status of the device. If the device is not calibrated the azimuth may not be accurate.

Digital compasses are susceptible to magnetic interference and may need calibration after being placed near anything that emits a magnetic force. Accuracy of the compass can be affected by any ferrous materials that are nearby.

The calibration status of the device is measured as a number from 0 to 1. A value of 1 is the highest level that the device can support and 0 is the worst.

class PySide6.QtSensors.QCompassReading(parent)
Parameters

parentPySide6.QtCore.QObject

PySide6.QtSensors.QCompassReading.azimuth()
Return type

float

See also

setAzimuth()

PySide6.QtSensors.QCompassReading.calibrationLevel()
Return type

float

PySide6.QtSensors.QCompassReading.setAzimuth(azimuth)
Parameters

azimuth – float

Sets the azimuth of the device.

See also

azimuth() QCompassReading Units

PySide6.QtSensors.QCompassReading.setCalibrationLevel(calibrationLevel)
Parameters

calibrationLevel – float

Sets the calibration level of the reading to calibrationLevel.